How to Replace a Delta Faucet (Step-by-Step Guide)

AvatarByLiana Farrell Faucet Queries

How to Replace a Delta Faucet

Your Delta faucet is one of the most important fixtures in your home. It’s the one you use to brush your teeth, wash your hands, and fill your pots with water. But what happens when your faucet starts to leak or malfunction? Do you have to call a plumber?

Not necessarily. In many cases, you can replace a Delta faucet yourself. It’s a relatively simple task that can be completed in just a few steps. And with this step-by-step guide, you’ll be able to do it like a pro.

So, if your Delta faucet is giving you trouble, don’t despair. Just follow these instructions, and you’ll be back to enjoying your sparkling clean water in no time.

Step Tools Instructions
1 Pliers Turn off the water supply to the faucet.
2 Screwdriver Remove the screws that hold the faucet to the sink.
3 Plumber’s putty Apply plumber’s putty to the threads of the new faucet.
4 Faucet Screw the new faucet onto the sink.
5 Wrench Turn on the water supply to the faucet.

How to Replace a Delta Faucet

Gather the necessary tools and materials

Before you begin replacing your Delta faucet, gather the necessary tools and materials. You will need:

  • A new Delta faucet
  • A set of Allen wrenches
  • A screwdriver
  • A basin wrench
  • A pipe wrench
  • PTFE tape
  • Plumber’s putty
  • A bucket
  • A towel

Shut off the water supply to the faucet

The first step is to shut off the water supply to the faucet. This can be done by turning off the main water valve located at the back of your home’s water meter. Once the water supply is turned off, you can begin removing the old faucet.

Remove the old faucet

To remove the old faucet, you will need to first remove the escutcheon plate. This is the decorative cover that surrounds the faucet at the base of the sink. The escutcheon plate is typically held in place by two screws. Once the screws are removed, you can carefully pry the escutcheon plate off of the sink.

Next, you will need to remove the faucet handles. The handles are typically held in place by a set of screws. Once the screws are removed, you can carefully pry the handles off of the faucet.

Now, you can begin removing the faucet body. The faucet body is typically held in place by a set of nuts and bolts. You will need to use a basin wrench to loosen the nuts and bolts. Once the nuts and bolts are loosened, you can carefully remove the faucet body from the sink.

Install the new faucet

To install the new faucet, you will need to reverse the steps you took to remove the old faucet. First, you will need to install the faucet body in the sink. The faucet body is typically held in place by a set of nuts and bolts. You will need to use a basin wrench to tighten the nuts and bolts.

Next, you will need to install the faucet handles. The handles are typically held in place by a set of screws. Once the screws are installed, you can carefully snap the handles into place.

Finally, you will need to install the escutcheon plate. The escutcheon plate is typically held in place by two screws. Once the screws are installed, you can carefully snap the escutcheon plate into place.

Turn on the water supply to the faucet

Once the new faucet is installed, you can turn on the water supply to the faucet. Be sure to check for leaks around the faucet. If you find any leaks, you will need to tighten the connections until the leaks stop.

Replacing a Delta faucet is a relatively simple task that can be completed in a few hours. By following the steps in this guide, you can easily replace your old faucet with a new one.

3. Remove the old faucet

To remove the old faucet, you will need the following tools:

  • Adjustable wrench
  • Pliers
  • Penetrating oil
  • Screwdriver

1. Turn off the water supply to the faucet. This is usually located under the sink.
2. Remove the screws that hold the faucet to the sink. These screws are typically located on the back of the faucet.
3. Use a wrench to loosen the nuts that connect the faucet to the water supply lines.
4. Use pliers to grip the copper pipes and unscrew them from the faucet.
5. Apply penetrating oil to the threads of the faucet and let it sit for a few minutes. This will help loosen the faucet so that you can remove it more easily.
6. Use a screwdriver to pry the faucet off of the sink. Be careful not to damage the sink.

4. Install the new faucet

To install the new faucet, you will need the following tools:

  • Adjustable wrench
  • Pliers
  • Penetrating oil
  • Screwdriver
  • New faucet
  • New washers
  • New O-rings

1. Turn off the water supply to the faucet.
2. Remove the old faucet by following the steps in the previous section.
3. Apply a thin coat of plumber’s grease to the threads of the new faucet. This will help to create a seal and prevent leaks.
4. Place the new faucet on the sink and align the holes with the water supply lines.
5. Insert the copper pipes into the faucet and tighten the nuts with a wrench.
6. Tighten the screws that hold the faucet to the sink.
7. Turn on the water supply to the faucet and check for leaks.

Replacing a faucet is a relatively simple task that can be completed in a few hours. By following these steps, you can easily remove and install a new faucet in your home.

How to Replace a Delta Faucet?

Q: What tools do I need to replace a Delta faucet?

A: You will need the following tools:

  • A Phillips head screwdriver
  • A flathead screwdriver
  • A wrench
  • Penetrating oil
  • A bucket
  • Paper towels

Q: How do I remove the old faucet?

A: 1. Turn off the water supply to the faucet.
2. Remove the escutcheon (the decorative cover around the faucet) by unscrewing it from the faucet body.
3. Remove the screws that hold the faucet handles in place.
4. Use a wrench to loosen the nuts that connect the faucet body to the sink.
5. Carefully lift the faucet body out of the sink.

Q: How do I install the new faucet?

A: 1. Apply a thin coat of plumber’s putty to the threads of the new faucet body.
2. Insert the faucet body into the sink and tighten the nuts until it is secure.
3. Connect the water supply lines to the faucet body.
4. Replace the escutcheon.
5. Turn on the water supply to the faucet and test it to make sure it is working properly.

Q: What are some common problems with Delta faucets?

A: Some common problems with Delta faucets include:

  • Leaking faucets
  • Dripping faucets
  • Faucets that won’t turn on or off
  • Faucets that are difficult to operate

Q: How can I fix a leaking Delta faucet?

A: There are a few ways to fix a leaking Delta faucet. The best way to fix the leak depends on the cause of the leak.

  • If the leak is coming from the faucet spout, you can try tightening the packing nut under the spout.
  • If the leak is coming from the faucet handles, you can try replacing the O-rings in the handles.
  • If the leak is coming from the faucet body, you may need to replace the faucet cartridge.

Q: How can I fix a dripping Delta faucet?

A: There are a few ways to fix a dripping Delta faucet. The best way to fix the drip depends on the cause of the drip.

  • If the drip is coming from the faucet spout, you can try tightening the packing nut under the spout.
  • If the drip is coming from the faucet handles, you can try replacing the O-rings in the handles.
  • If the drip is coming from the faucet body, you may need to replace the faucet cartridge.

Q: How can I fix a Delta faucet that won’t turn on or off?

A: There are a few things you can check if your Delta faucet won’t turn on or off.

  • Make sure that the water supply to the faucet is turned on.
  • Check the faucet handles to make sure they are turned all the way on or off.
  • If the faucet is still not working, you may need to replace the faucet cartridge.

Q: How can I fix a Delta faucet that is difficult to operate?

A: There are a few things you can check if your Delta faucet is difficult to operate.

  • Make sure that the faucet is properly installed.
  • Check the faucet handles to make sure they are not damaged or stuck.
  • If the faucet is still difficult to operate, you may need to replace the faucet cartridge.

Q: Where can I get replacement parts for my Delta faucet?

A: You can get replacement parts for your Delta faucet at most hardware stores or online retailers.

Q: How much does it cost to replace a Delta faucet?

The cost of replacing a Delta faucet depends on the type of faucet and the materials used. The average cost of a new Delta faucet is between $50 and $200. The cost of labor to install the faucet will vary depending on the complexity of the installation.

In this tutorial, we have shown you how to replace a Delta faucet. We have covered the steps involved in removing the old faucet, installing the new faucet, and testing the new faucet to make sure it is working properly. We hope that this tutorial has been helpful and that you are now able to replace your own Delta faucet.

Here are some key takeaways from this tutorial:

  • Before you begin, make sure you have the necessary tools and materials.
  • Turn off the water supply to the faucet before you begin.
  • Remove the old faucet by unscrewing the nuts that hold it in place.
  • Install the new faucet by following the instructions that came with it.
  • Test the new faucet to make sure it is working properly.

If you have any questions or concerns, please do not hesitate to contact a qualified plumber.

Author Profile

Liana Farrell
Liana Farrell
Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.

Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”

Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.