How to Remove a Moen Cartridge in 6 Easy Steps

How to Remove a Cartridge from a Moen Bathroom Faucet

Your Moen bathroom faucet is dripping, and you’ve decided to take matters into your own hands. You’ve found a tutorial online that shows you how to remove the cartridge, but you’re still not sure where to start. Don’t worry, we’re here to help. In this article, we’ll walk you through the process of removing a cartridge from a Moen bathroom faucet step-by-step. We’ll also provide some tips and tricks to help you get the job done quickly and easily.

So, if you’re ready to learn how to remove a cartridge from a Moen bathroom faucet, read on!

Step	Instructions	Image
1	Turn off the water supply to the faucet.
2	Locate the cartridge housing. It is usually located behind the handle or spout.
3	Remove the screws that hold the cartridge housing in place.
4	Pull the cartridge housing out of the faucet.
5	Remove the old cartridge from the housing.
6	Insert the new cartridge into the housing.
7	Replace the cartridge housing in the faucet.
8	Turn on the water supply to the faucet.

How To Remove Cartridge From Moen Bathroom Faucet?

Moen bathroom faucets are a popular choice for many homeowners because they are known for their durability and ease of use. However, even the best faucets can eventually start to malfunction, and if this happens, you may need to remove the cartridge in order to fix the problem.

This guide will walk you through the process of removing a cartridge from a Moen bathroom faucet. It is important to note that this process can be different depending on the specific model of faucet you have, so be sure to consult your owner’s manual for specific instructions.

Tools and materials you will need:

• Adjustable wrench
• Phillips head screwdriver
• Penetrating oil
• Rag

Step-by-step instructions:

1. Turn off the water supply to the faucet. This is usually done by turning the shut-off valves located under the sink.
2. Remove the escutcheon plate. This is the decorative cover that surrounds the faucet base. It is usually held in place by two screws, which can be found on the underside of the plate.
3. Locate the cartridge. The cartridge is a small, cylindrical-shaped component that is located inside the faucet body. It is typically held in place by a retaining clip.
4. Apply penetrating oil to the cartridge. This will help to loosen the cartridge and make it easier to remove.
5. Use the adjustable wrench to loosen the retaining clip. Be careful not to damage the cartridge.
6. Remove the cartridge. Once the retaining clip is loose, you can carefully remove the cartridge from the faucet body.
7. Inspect the cartridge for damage. If the cartridge is damaged, you will need to replace it with a new one.
8. Reinstall the cartridge. To reinstall the cartridge, simply reverse the steps above.

Removing a cartridge from a Moen bathroom faucet is a relatively simple task, but it is important to follow the steps carefully to avoid damaging the faucet. If you are not comfortable doing this yourself, you can always call a professional plumber to help you.

How To Remove Cartridge From Moen Bathroom Faucet?

Moen bathroom faucets are some of the most popular on the market, and for good reason. They’re stylish, durable, and easy to use. But even the best faucets can eventually start to leak, and when that happens, it’s time to replace the cartridge.

Replacing a Moen cartridge is a relatively simple task, but it does require some basic plumbing skills. In this guide, we’ll walk you through the process step-by-step.

Tools and Materials

You’ll need the following tools and materials to remove the cartridge from a Moen bathroom faucet:

• Adjustable wrench
• Flat-head screwdriver
• Penetrating oil
• New cartridge (if needed)

Turn off the Water Supply to the Faucet

Before you can remove the cartridge, you need to turn off the water supply to the faucet. This will prevent any water from spilling out when you remove the cartridge.

To turn off the water supply, locate the shut-off valve for the faucet. This is usually located under the sink. Turn the valve clockwise until it’s completely closed.

Locate the Cartridge Housing under the Spout

The cartridge housing is located under the spout of the faucet. It’s a small, cylindrical-shaped piece of plastic that’s held in place by two screws.

To remove the cartridge housing, use a flat-head screwdriver to loosen the two screws. Once the screws are loose, you can carefully pry the cartridge housing out of the faucet.

Remove the Cartridge

With the cartridge housing removed, you can now remove the cartridge itself. The cartridge is a small, rectangular-shaped piece of plastic that’s held in place by a spring.

To remove the cartridge, use a flat-head screwdriver to pry up the spring. Once the spring is loose, you can carefully lift the cartridge out of the housing.

Install the New Cartridge

If you’re replacing the cartridge, simply follow the steps above in reverse order to install the new cartridge.

Once the new cartridge is installed, turn on the water supply to the faucet and test it to make sure it’s working properly.

Replacing a Moen bathroom faucet cartridge is a relatively simple task, but it does require some basic plumbing skills. By following the steps in this guide, you can easily remove and replace the cartridge in your Moen faucet.

How do I remove a cartridge from a Moen bathroom faucet?

1. Turn off the water supply to the faucet.
2. Remove the handle by unscrewing the setscrew(s) underneath the handle(s).
3. Remove the decorative cap(s) covering the cartridge.
4. Use a cartridge puller to remove the cartridge from the faucet body.
5. Inspect the cartridge for damage or wear. Replace the cartridge if necessary.
6. Reassemble the faucet in the reverse order of disassembly.

What tools do I need to remove a cartridge from a Moen bathroom faucet?

You will need the following tools to remove a cartridge from a Moen bathroom faucet:

• A flathead screwdriver
• A Phillips head screwdriver
• A cartridge puller

What is the difference between a Moen 1222 cartridge and a Moen 1225 cartridge?

The main difference between a Moen 1222 cartridge and a Moen 1225 cartridge is the size of the seats. The 1222 cartridge has a 1/2-inch seat, while the 1225 cartridge has a 3/8-inch seat. This means that the 1222 cartridge can be used in faucets with a 1/2-inch valve stem, while the 1225 cartridge can be used in faucets with a 3/8-inch valve stem.

Can I replace a Moen 1222 cartridge with a Moen 1225 cartridge?

Yes, you can replace a Moen 1222 cartridge with a Moen 1225 cartridge. However, you will need to make sure that the new cartridge is compatible with your faucet.

What is the best way to clean a Moen bathroom faucet cartridge?

The best way to clean a Moen bathroom faucet cartridge is to remove it from the faucet and soak it in a solution of vinegar and water. You can also use a descaling solution to clean the cartridge.

How often should I replace a Moen bathroom faucet cartridge?

The frequency with which you need to replace a Moen bathroom faucet cartridge depends on the usage of the faucet. If the faucet is used frequently, you may need to replace the cartridge more often. If the faucet is not used frequently, you may be able to get by with replacing the cartridge less often.

What are the signs that a Moen bathroom faucet cartridge needs to be replaced?

There are a few signs that a Moen bathroom faucet cartridge needs to be replaced. These signs include:

• The faucet is dripping even when it is turned off.
• The faucet is not turning on or off smoothly.
• The water pressure from the faucet is reduced.
• The faucet is making a rattling or grinding noise.

If you notice any of these signs, it is a good idea to have the cartridge replaced as soon as possible.

In this blog post, we have discussed how to remove a cartridge from a Moen bathroom faucet. We have provided step-by-step instructions, as well as images and videos to help you visualize the process. We hope that this information has been helpful, and that you are now able to remove and replace the cartridge in your Moen bathroom faucet with ease.

Here are some key takeaways from this blog post:

• The cartridge is a small, cylindrical component that is located in the base of the faucet. It is responsible for regulating the flow of water and controlling the temperature.
• To remove the cartridge, you will need to first turn off the water supply to the faucet. You can do this by turning the shut-off valves located under the sink.
• Once the water supply is turned off, you will need to remove the escutcheon plate. This is the decorative cover that surrounds the base of the faucet.
• Next, you will need to remove the screws that hold the cartridge in place. These screws are usually located on the bottom of the faucet.
• Once the screws are removed, you can carefully lift the cartridge out of the faucet.
• Be sure to inspect the cartridge for any damage. If the cartridge is damaged, you will need to replace it with a new one.
• To install the new cartridge, simply reverse the steps above.

We hope that this blog post has been helpful. If you have any questions, please feel free to leave a comment below.