How To Replace Toto Toilet Seat With Hidden Bolts?

How to Replace a Toto Toilet Seat with Hidden Bolts

Your Toto toilet seat is one of the most important parts of your bathroom. It not only keeps you clean and comfortable, but it also adds to the overall look and feel of your space. But what happens when your toilet seat starts to wear out or break? If you have a Toto toilet seat with hidden bolts, replacing it can be a little tricky. But don’t worry, we’re here to help. In this article, we’ll walk you through the process of replacing a Toto toilet seat with hidden bolts, step-by-step.

We’ll cover everything from removing the old seat to installing the new one. We’ll also provide tips on how to choose the right toilet seat for your needs and how to keep your toilet seat looking its best. So whether you’re a DIY novice or a seasoned pro, read on for all the information you need to know about replacing a Toto toilet seat with hidden bolts.

Step	Instructions	Image
1	Remove the old toilet seat by unscrewing the two bolts at the back of the toilet.
2	Clean the toilet bowl and the toilet seat base with a cleaning solution.
3	Apply a thin layer of plumber’s putty to the bottom of the new toilet seat.
4	Align the new toilet seat with the toilet bowl and insert the bolts through the holes in the seat.
5	Secure the toilet seat to the toilet bowl by tightening the bolts.

How to Replace a Toto Toilet Seat with Hidden Bolts

Toto toilet seats are known for their sleek design and hidden bolts, which make them a popular choice for many homeowners. However, if your toilet seat is damaged or worn out, you may need to replace it. Replacing a Toto toilet seat with hidden bolts is a relatively simple task, but it does require some special tools and materials.

Tools and materials you will need

• Replacement toilet seat
• Phillips head screwdriver
• Adjustable wrench
• Penetrating oil
• Rag

Step-by-step instructions

1. Turn off the water supply to the toilet. Locate the water supply valve under the sink or behind the toilet. Turn the valve clockwise to turn off the water.
2. Flush the toilet to drain the water from the tank.
3. Remove the old toilet seat. There are two hidden bolts located on either side of the toilet bowl. Use a Phillips head screwdriver to loosen the bolts. Once the bolts are loose, you can lift the toilet seat off of the bowl.
4. Apply penetrating oil to the bolts. The bolts on a Toto toilet seat are often difficult to remove, so it’s helpful to apply penetrating oil to the threads before you try to unscrew them. Allow the penetrating oil to sit for a few minutes before you continue.
5. Remove the old bolts. Use an adjustable wrench to loosen the bolts. Be careful not to damage the bolts or the toilet bowl.
6. Install the new toilet seat. Place the new toilet seat on the bowl. Align the holes in the seat with the bolts in the bowl. Insert the bolts through the holes and tighten them with the adjustable wrench.
7. Turn on the water supply to the toilet. Flush the toilet to test the new toilet seat.

Replacing a Toto toilet seat with hidden bolts is a relatively simple task, but it does require some special tools and materials. By following these steps, you can easily replace your old toilet seat with a new one.

How To Remove the Old Toilet Seat

To remove the old toilet seat, you will need:

• A Phillips head screwdriver
• A flathead screwdriver
• A pair of pliers

1. First, turn off the water supply to the toilet. This is usually located under the sink or behind the toilet.
2. Flush the toilet to drain all of the water from the tank.
3. Use the Phillips head screwdriver to remove the two screws that hold the toilet seat to the toilet bowl.
4. Use the flathead screwdriver to pry up the caps that cover the two bolts underneath the toilet seat.
5. Use the pliers to unscrew the two bolts.
6. Lift up the toilet seat and remove it from the toilet bowl.

Locate the Two Hidden Bolts Underneath the Toilet Seat

The two hidden bolts underneath the toilet seat are located on either side of the toilet bowl, just below the rim. They are typically covered by caps that are held in place by small screws. To locate the bolts, you will need to remove the caps.

1. Use a Phillips head screwdriver to remove the two screws that hold the caps in place.
2. Carefully pry up the caps with a flathead screwdriver.
3. The two hidden bolts will be revealed.

How to Replace a Toilet Seat with Hidden Bolts

Replacing a toilet seat with hidden bolts is a relatively simple task that can be completed in a few minutes.

1. Gather the necessary tools and materials.

• New toilet seat
• Phillips head screwdriver
• Flathead screwdriver
• Pliers
• Penetrating oil
• Rag

2. Turn off the water supply to the toilet.

3. Flush the toilet to drain all of the water from the tank.

4. Remove the old toilet seat.

5. Locate the two hidden bolts underneath the toilet seat.

6. Apply a small amount of penetrating oil to the bolts.

7. Use the pliers to unscrew the bolts.

8. Lift up the old toilet seat and remove it from the toilet bowl.

9. Clean the toilet bowl with a rag.

10. Position the new toilet seat on the toilet bowl.

11. Insert the two bolts through the holes in the toilet seat.

12. Use the pliers to tighten the bolts.

13. Replace the caps on the bolts.

14. Turn on the water supply to the toilet.

15. Flush the toilet to test the new toilet seat.

Your new toilet seat is now installed!

How do I remove the old toilet seat?

1. Locate the two hidden bolts on the back of the toilet seat. They are typically located just below the rim of the toilet bowl, and are held in place by small plastic caps.
2. Use a flat-head screwdriver to pry off the plastic caps. Be careful not to damage the bolts underneath.
3. Insert the screwdriver into the hole in the center of each bolt and turn counterclockwise to loosen. The bolts may be tight, so you may need to use some force.
4. Once the bolts are loose, carefully lift up on the front of the toilet seat and pull it away from the toilet bowl. The seat may be stuck, so you may need to wiggle it back and forth to loosen it.

How do I install the new toilet seat?

1. Place the new toilet seat on top of the toilet bowl. Make sure that the holes in the seat align with the bolts in the toilet bowl.
2. Insert the bolts through the holes in the seat and into the toilet bowl. Be careful not to cross-thread the bolts.
3. Use a flat-head screwdriver to tighten the bolts until they are snug. Do not overtighten the bolts, as this could damage the seat.
4. Replace the plastic caps on the bolts.

What if the toilet seat is stuck?

If the toilet seat is stuck, you can try the following:

• Use a hair dryer to heat up the seat. This will make it easier to loosen.
• Apply a lubricant, such as WD-40, to the bolts. This will help to reduce friction and make it easier to turn the bolts.
• Use a pry bar or other tool to carefully pry up on the front of the seat. Be careful not to damage the seat or the toilet bowl.

What if the toilet seat is too loose?

If the toilet seat is too loose, you can try the following:

• Tighten the bolts until they are snug. Do not overtighten the bolts, as this could damage the seat.
• Apply a small amount of plumber’s putty or other sealant around the bolts. This will help to create a tighter seal and prevent the seat from moving.
• Replace the toilet seat with a new one that is a tighter fit.

What if the toilet seat is cracked or broken?

If the toilet seat is cracked or broken, you will need to replace it. To do this, follow the steps above for removing and installing a new toilet seat.

How often should I replace my toilet seat?

It is generally recommended to replace your toilet seat every 5-10 years. This will help to ensure that the seat is in good condition and that it is working properly.

What are some other tips for replacing a toilet seat?

• Make sure that you have the right tools and materials before you start.
• Work slowly and carefully to avoid damaging the toilet bowl or the seat.
• If you are not comfortable doing the job yourself, you can hire a plumber to help you.

  In this article, we have discussed how to replace a Toto toilet seat with hidden bolts. We have covered the steps in detail, from removing the old seat to installing the new one. We have also provided tips on how to choose the right seat for your toilet and how to make sure that it is installed correctly.

We hope that this article has been helpful. If you have any questions, please do not hesitate to contact us.