How to Fix a Delta Tub Faucet (Step-by-Step Guide)

How to Fix a Delta Tub Faucet

Your Delta tub faucet is one of the most important fixtures in your bathroom. It’s the one you use to get clean, so when it starts to malfunction, it can be a real pain. But don’t worry, fixing a Delta tub faucet is usually a pretty straightforward process. In this article, we’ll walk you through the steps of how to fix a Delta tub faucet, so you can get your bathroom back in working order in no time.

We’ll cover everything from diagnosing the problem to replacing the parts, and we’ll provide tips on how to prevent future problems. So whether your faucet is leaking, dripping, or just not working at all, read on for all the information you need to know.

Step	Instructions	Image
1	Turn off the water supply to the faucet.
2	Remove the handle by unscrewing the set screws.
3	Inspect the cartridge for damage.
4	Replace the cartridge if necessary.
5	Reassemble the faucet.
6	Turn on the water supply to the faucet.

How to Fix a Delta Tub Faucet?

Identify the Problem

The first step to fixing a Delta tub faucet is to identify the problem. Here are some common problems with Delta tub faucets and their solutions:

• The faucet is dripping. This is usually caused by a worn-out O-ring or a loose cartridge. To fix this problem, you will need to remove the faucet handle and replace the O-ring or cartridge.
• The faucet is leaking from the spout. This is usually caused by a worn-out washer or a loose connection. To fix this problem, you will need to remove the spout and replace the washer or tighten the connection.
• The faucet is not turning on or off. This is usually caused by a faulty cartridge or a problem with the water supply. To fix this problem, you will need to remove the faucet handle and replace the cartridge or check the water supply.
• The faucet is making a whistling noise. This is usually caused by a restricted water flow. To fix this problem, you will need to clean the faucet aerator.

Once you have identified the problem, you can begin to fix the Delta tub faucet.

Gather Your Tools and Materials

To fix a Delta tub faucet, you will need the following tools and materials:

• A Phillips head screwdriver
• A flathead screwdriver
• A pair of pliers
• A replacement O-ring or cartridge
• A replacement washer
• A pipe wrench
• A bucket
• Plumbing tape

You may also need to purchase a new faucet handle if the old one is damaged.

Instructions for Fixing a Delta Tub Faucet

Now that you have identified the problem and gathered your tools and materials, you can begin to fix the Delta tub faucet.

1. Turn off the water supply to the faucet.
2. Remove the faucet handle by unscrewing the screws that hold it in place.
3. Remove the old O-ring or cartridge by carefully prying it out of the faucet body.
4. Clean the faucet body with a rag and some warm, soapy water.
5. Apply a thin layer of plumber’s tape to the threads of the new O-ring or cartridge.
6. Insert the new O-ring or cartridge into the faucet body.
7. Replace the faucet handle and tighten the screws.
8. Turn on the water supply to the faucet and test it to make sure it is working properly.

If you are unable to fix the Delta tub faucet yourself, you can call a professional plumber for help.

Fixing a Delta tub faucet is a relatively simple task that can be completed in a few steps. By following the instructions in this guide, you can save yourself time and money by repairing the faucet yourself.

Disassemble the Faucet

To disassemble the faucet, you will need to:

• Turn off the water supply to the faucet.
• Remove the handle covers.
• Remove the screws that hold the faucet body to the sink.
• Remove the faucet body from the sink.
• Remove the cartridge.
• Remove the stem.
• Remove the escutcheon.

Turn off the water supply to the faucet.

The first step is to turn off the water supply to the faucet. This can be done by turning the shut-off valves located under the sink.

Remove the handle covers.

The next step is to remove the handle covers. These are usually held in place by screws or clips. Once the screws or clips are removed, the handle covers can be lifted off of the faucet.

Remove the screws that hold the faucet body to the sink.

The next step is to remove the screws that hold the faucet body to the sink. These screws are usually located on the bottom of the faucet body. Once the screws are removed, the faucet body can be lifted off of the sink.

Remove the faucet body from the sink.

The faucet body is now free from the sink. You can now remove it completely by lifting it up and out of the sink.

Remove the cartridge.

The cartridge is the part of the faucet that controls the flow of water. It is located inside the faucet body. To remove the cartridge, you will need to first remove the escutcheon.

Remove the stem.

The stem is the part of the faucet that connects the handle to the cartridge. To remove the stem, you will need to first remove the escutcheon.

Remove the escutcheon.

The escutcheon is a decorative cover that hides the screws that hold the faucet body to the sink. To remove the escutcheon, you will need to use a flathead screwdriver to pry it off of the faucet body.

Repair or Replace the Faulty Parts

Once you have disassembled the faucet, you can now inspect the parts for damage. If any of the parts are damaged, you will need to repair or replace them.

Repair or replace the cartridge.

The cartridge is the most common part that fails in a faucet. If the cartridge is damaged, you will need to replace it. To replace the cartridge, you will need to:

• Remove the old cartridge.
• Clean the faucet body.
• Install the new cartridge.

Repair or replace the stem.

The stem is another common part that fails in a faucet. If the stem is damaged, you will need to replace it. To replace the stem, you will need to:

• Remove the old stem.
• Clean the faucet body.
• Install the new stem.

Repair or replace the escutcheon.

The escutcheon is a decorative cover that hides the screws that hold the faucet body to the sink. If the escutcheon is damaged, you will need to replace it. To replace the escutcheon, you will need to:

• Remove the old escutcheon.
• Clean the faucet body.
• Install the new escutcheon.

Reassemble the Faucet

Once you have repaired or replaced the faulty parts, you can now reassemble the faucet. To reassemble the faucet, you will need to:

• Install the new cartridge.
• Install the new stem.
• Install the new escutcheon.
• Install the faucet body to the sink.
• Install the handle covers.

Install the new cartridge.

To install the new cartridge, you will need to:

• Apply a thin coat of plumber’s grease to the o-ring on the cartridge.
• Insert the cartridge into the faucet body.
• Tighten the screws that hold the cartridge in place.

Install the new stem.

To install the new stem, you will need to:

• Apply a thin coat of plumber’s grease to the o-ring on the stem.
• Insert the stem into the faucet body.
• Tighten the screws that hold the stem in place.

Install the new escutcheon.

To install the new escutcheon, you will need to:

• Apply a thin coat of plumber’s putty to the back of the escutcheon.
• Press the escutcheon onto the faucet body.
• Allow the plumber’s putty to dry.

Install the faucet body to the sink.

To install the faucet

How do I remove a Delta tub faucet?

1. Turn off the water supply to the faucet.
2. Remove the decorative cap from the handle by prying it up with a flathead screwdriver.
3. Remove the screws that hold the handle in place.
4. Pull the handle off of the faucet.
5. Remove the locknut that holds the faucet in place.
6. Turn the faucet stem counterclockwise to remove it from the faucet body.
7. Clean the faucet body and replace the parts as needed.

How do I replace a Delta tub faucet cartridge?

1. Turn off the water supply to the faucet.
2. Remove the decorative cap from the handle by prying it up with a flathead screwdriver.
3. Remove the screws that hold the handle in place.
4. Pull the handle off of the faucet.
5. Remove the locknut that holds the faucet in place.
6. Turn the faucet stem counterclockwise to remove it from the faucet body.
7. Remove the old cartridge from the faucet body.
8. Insert the new cartridge into the faucet body.
9. Replace the locknut and tighten it until it is snug.
10. Replace the handle and tighten the screws.
11. Turn on the water supply to the faucet.

How do I fix a Delta tub faucet that is leaking?

1. Turn off the water supply to the faucet.
2. Remove the decorative cap from the handle by prying it up with a flathead screwdriver.
3. Remove the screws that hold the handle in place.
4. Pull the handle off of the faucet.
5. Remove the locknut that holds the faucet in place.
6. Turn the faucet stem counterclockwise to remove it from the faucet body.
7. Inspect the faucet seat for damage. If the seat is damaged, replace it with a new one.
8. Apply a thin coat of plumber’s grease to the new seat.
9. Insert the new seat into the faucet body.
10. Replace the faucet stem and tighten it until it is snug.
11. Replace the locknut and tighten it until it is snug.
12. Replace the handle and tighten the screws.
13. Turn on the water supply to the faucet.

How do I adjust the temperature of a Delta tub faucet?

1. Turn the hot water handle clockwise to increase the temperature of the water.
2. Turn the cold water handle counterclockwise to decrease the temperature of the water.
3. To mix the hot and cold water, turn both handles at the same time.

How do I turn off a Delta tub faucet?

1. Turn the hot water handle counterclockwise until it is all the way off.
2. Turn the cold water handle clockwise until it is all the way off.

How do I clean a Delta tub faucet?

1. Remove the decorative cap from the handle by prying it up with a flathead screwdriver.
2. Remove the screws that hold the handle in place.
3. Pull the handle off of the faucet.
4. Clean the faucet body with a soft cloth and a mild detergent.
5. Rinse the faucet body with warm water.
6. Dry the faucet body with a soft cloth.
7. Replace the handle and tighten the screws.
8. Replace the decorative cap.

In this blog post, we have discussed how to fix a Delta tub faucet. We have covered the following topics:

• Identifying the problem with your Delta tub faucet
• Removing the faucet handle and escutcheon
• Replacing the cartridge
• Installing the new faucet handle and escutcheon
• Testing the faucet

We hope that this blog post has been helpful. If you have any further questions, please do not hesitate to contact us.