How to Replace a Toilet Paper Holder (Step-by-Step Guide)

How to Replace a Toilet Paper Holder

A toilet paper holder is a simple but essential part of any bathroom. It’s easy to take for granted, but when it breaks, it can be a real pain. Replacing a toilet paper holder is a relatively simple task, but there are a few things you need to know to do it correctly.

In this article, we’ll walk you through the process of replacing a toilet paper holder, step-by-step. We’ll cover everything from removing the old holder to installing the new one. By the end of this article, you’ll be able to replace a toilet paper holder like a pro.

So, if your toilet paper holder is broken, don’t despair. Just follow these steps, and you’ll be back to enjoying your TP in no time.

Step Instructions Image
1 Turn off the water supply to the toilet.
2 Remove the old toilet paper holder by unscrewing the screws that hold it in place.
3 Clean the area where the toilet paper holder was attached.
4 Apply a thin layer of plumber’s putty to the back of the new toilet paper holder.
5 Press the new toilet paper holder firmly into place and screw it into place.
6 Turn the water supply back on to the toilet.

Toilet paper holders are a common bathroom fixture, but they can also be a source of frustration if they break or become loose. Replacing a toilet paper holder is a relatively simple task that can be completed in a few minutes. In this guide, we will walk you through the steps of replacing a toilet paper holder, including gathering materials, removing the old holder, and installing the new one.

Gather Materials

To replace a toilet paper holder, you will need the following materials:

  • Toilet paper roll
  • New toilet paper holder
  • Screwdriver
  • Tape measure
  • Level

Remove Old Toilet Paper Holder

The first step is to remove the old toilet paper holder. To do this, you will need to unscrew the old holder from the wall. If the old holder is stuck, you may need to use a utility knife to cut the caulking around the base of the holder.

Once the old holder is removed, you can clean the area around the mounting hole. Be sure to remove any old caulking or sealant.

Install New Toilet Paper Holder

Now that the old holder is removed, you can install the new one. To do this, you will need to align the new holder with the mounting hole and screw it into place. Be sure to tighten the screws securely.

Once the new holder is installed, you can replace the toilet paper roll. You may also want to apply a new bead of caulking around the base of the holder to prevent leaks.

Replacing a toilet paper holder is a relatively simple task that can be completed in a few minutes. By following these steps, you can easily replace your old toilet paper holder with a new one.

Here are some additional tips for replacing a toilet paper holder:

  • Choose a toilet paper holder that is the right size for your bathroom.
  • Make sure the toilet paper holder is installed securely so that it does not fall off the wall.
  • If you are replacing a wall-mounted toilet paper holder with a floor-mounted one, you will need to drill new holes in the floor.
  • Be sure to clean up any mess that you make during the installation process.

3. Install New Toilet Paper Holder

To install a new toilet paper holder, you will need:

  • A new toilet paper holder
  • A Phillips head screwdriver
  • A drill and drill bit (optional)
  • A level
  • A pencil
  • A tape measure

1. Remove the old toilet paper holder.

If your toilet paper holder is attached to the wall with screws, use a Phillips head screwdriver to unscrew the screws. If your toilet paper holder is attached to the wall with adhesive, you will need to use a heat gun or hair dryer to soften the adhesive and then carefully pry the toilet paper holder off the wall.

2. Prepare the wall.

If your toilet paper holder is going to be attached to a wall that is painted, you will need to remove the paint from the area where the toilet paper holder will be installed. You can do this by using a utility knife to scrape off the paint or by using a paint stripper.

3. Center the new toilet paper holder on the wall.

Use a level to make sure that the new toilet paper holder is centered on the wall. Mark the screw holes with a pencil.

4. Drill pilot holes in the wall.

If you are using screws to attach the toilet paper holder to the wall, you will need to drill pilot holes in the wall. The pilot holes should be the same diameter as the screws that you are using.

5. Screw the new toilet paper holder into the wall.

Insert the screws into the pilot holes and tighten them with a Phillips head screwdriver.

6. Test the new toilet paper holder.

Hang a toilet paper roll on the new toilet paper holder. Make sure that the toilet paper roll is secure and that the holder is level.

4. Test the New Toilet Paper Holder

Once you have installed the new toilet paper holder, you should test it to make sure that it is working properly. Hang a toilet paper roll on the holder and make sure that it is secure. You should also make sure that the holder is level. If the toilet paper holder is not level, you can adjust it by turning the screws on the back of the holder.

Replacing a toilet paper holder is a relatively simple task that can be completed in a few minutes. By following these steps, you can easily install a new toilet paper holder that will meet your needs.

How to Replace a Toilet Paper Holder

Q: What tools do I need to replace a toilet paper holder?

A: You will need a Phillips head screwdriver, a flathead screwdriver, and a pair of pliers.

Q: How do I remove the old toilet paper holder?

A: 1. First, turn off the water supply to the toilet. You can usually find the shut-off valve under the sink or behind the toilet.
2. Next, flush the toilet to empty the tank.
3. Once the tank is empty, use the flathead screwdriver to pry off the cap that covers the tank bolts.
4. Use the Phillips head screwdriver to loosen the tank bolts.
5. Carefully lift the tank off of the toilet bowl.
6. Remove the old toilet paper holder from the tank.

Q: How do I install the new toilet paper holder?

A: 1. Place the new toilet paper holder on the tank and align the holes in the holder with the bolts in the tank.
2. Insert the bolts through the holes in the holder and tighten them with the Phillips head screwdriver.
3. Replace the cap that covers the tank bolts.
4. Turn on the water supply to the toilet.
5. Flush the toilet to test the new toilet paper holder.

Q: What if the toilet paper holder is attached to the wall?

A: If the toilet paper holder is attached to the wall, you will need to remove the screws that hold it in place. Once the screws are removed, you can carefully pry the toilet paper holder off of the wall. To install the new toilet paper holder, follow the steps above for installing a toilet paper holder that is attached to the tank.

Q: What if I can’t find the shut-off valve for the toilet?

A: If you can’t find the shut-off valve for the toilet, you can turn off the main water supply to the house. The main water supply valve is usually located near the water meter. Once the main water supply is turned off, you can safely remove the old toilet paper holder and install the new one.

Q: What if I have a hard time reaching the toilet paper holder?

A: If you have a hard time reaching the toilet paper holder, you can purchase a toilet paper holder that is mounted on the wall at a higher level. You can also purchase a toilet paper holder that has a long reach.

In this blog post, we have discussed how to replace a toilet paper holder. We have covered the steps involved in the process, as well as some tips and tricks to make the job easier. We hope that this information has been helpful, and that you are now able to replace your toilet paper holder with confidence.

Here are some key takeaways from the blog post:

  • Replacing a toilet paper holder is a relatively simple task that can be completed in a few minutes.
  • The most important step is to turn off the water supply to the toilet before you begin.
  • Once the water supply is turned off, you can remove the old toilet paper holder by unscrewing the bolts that hold it in place.
  • To install the new toilet paper holder, simply attach it to the toilet using the bolts that came with the new holder.
  • Be sure to tighten the bolts securely so that the toilet paper holder is stable.

We hope that this blog post has been helpful. If you have any questions or comments, please feel free to leave them below.

Author Profile

Liana Farrell
Liana Farrell
Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.

Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”

Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.