How To Fit A Toilet Handle?

How to Fit a Toilet Handle

A toilet handle is a simple yet essential part of your bathroom. It allows you to flush the toilet, and it can also be used to stop the flow of water if needed. If your toilet handle is broken, it’s important to replace it as soon as possible. A broken toilet handle can be a health hazard, and it can also make your toilet difficult to use.

This article will show you how to fit a toilet handle. We’ll provide step-by-step instructions, and we’ll also discuss the different types of toilet handles available. By the end of this article, you’ll be able to replace your toilet handle like a pro.

What You’ll Need

To fit a toilet handle, you’ll need the following materials:

• A new toilet handle
• A screwdriver
• A pair of pliers
• A rag
• Plumbing putty

Step-by-Step Instructions

1. Turn off the water supply to the toilet. This is usually located under the sink or near the toilet.
2. Flush the toilet to drain all of the water from the tank.
3. Remove the old toilet handle by unscrewing the screws that hold it in place.
4. Apply a small amount of plumber’s putty to the threads of the new toilet handle.
5. Insert the new toilet handle into the hole in the tank.
6. Tighten the screws to secure the new toilet handle in place.
7. Turn on the water supply to the toilet.
8. Flush the toilet to test the new toilet handle.

Step	Tools	Instructions
1	Pliers, screwdriver	Turn off the water supply to the toilet.
2	Adjustable wrench	Remove the old toilet handle by unscrewing the nuts that hold it in place.
3	New toilet handle	Apply plumber’s putty to the bottom of the new toilet handle.
4	Pliers	Align the new toilet handle with the mounting holes and screw it into place.
5	Adjustable wrench	Turn on the water supply to the toilet and test the new toilet handle.

How to Fit a Toilet Handle

Gather your tools and materials

To fit a toilet handle, you will need the following tools and materials:

• A Phillips head screwdriver
• A flathead screwdriver
• A pair of pliers
• A new toilet handle
• A new toilet tank cover
• A gasket for the toilet tank cover
• Plumbing putty

Remove the old handle

1. First, turn off the water supply to the toilet. This is usually located behind the toilet, near the floor.
2. Flush the toilet to drain the water from the tank.
3. Remove the old toilet tank cover by prying it up with a screwdriver.
4. Locate the two bolts that hold the toilet handle in place. These are usually located on the inside of the tank, near the top.
5. Use a Phillips head screwdriver to loosen the bolts.
6. Remove the old toilet handle.

Install the new handle

1. Align the new toilet handle with the holes in the tank.
2. Insert the bolts through the holes and into the handle.
3. Tighten the bolts with a Phillips head screwdriver.
4. Replace the toilet tank cover.
5. Turn on the water supply to the toilet.
6. Flush the toilet to test the new handle.

Fitting a toilet handle is a relatively simple task that can be completed in a few minutes. By following these steps, you can easily replace a broken or damaged toilet handle.

3. Install the new handle

Once you have the new handle and the old one removed, it’s time to install the new one. This is a relatively simple process, but there are a few things you need to keep in mind.

First, make sure that the new handle is the same size and shape as the old one. If it’s not, you may need to modify the mounting plate or the handle itself.

Second, make sure that the new handle is installed in the same position as the old one. This will ensure that the toilet functions properly.

Third, tighten the screws that secure the handle in place. Make sure that they’re tight enough so that the handle doesn’t come loose, but not so tight that you damage the handle or the toilet.

Once the new handle is installed, test it to make sure that it works properly. Flush the toilet and make sure that the handle raises and lowers the seat and lid as it should.

If the handle doesn’t work properly, you may need to adjust the mounting plate or the handle itself. You may also need to replace the old handle with a new one that’s the correct size and shape.

4. Test the new handle

Once you’ve installed the new handle, it’s important to test it to make sure that it works properly. Here’s how to do it:

1. Flush the toilet.
2. Make sure that the handle raises and lowers the seat and lid as it should.
3. If the handle doesn’t work properly, you may need to adjust the mounting plate or the handle itself. You may also need to replace the old handle with a new one that’s the correct size and shape.

If the handle works properly, you’re done! You’ve successfully replaced the toilet handle.

Replacing a toilet handle is a relatively simple task that can be completed in a matter of minutes. By following these steps, you can easily and quickly replace your old handle with a new one.

Here are a few tips to help you get the job done:

• Make sure that you have the right tools and materials before you start.
• Follow the steps in the order that they’re presented.
• If you’re not comfortable doing the job yourself, hire a professional plumber.

With a little effort, you can easily replace your toilet handle and keep your bathroom looking its best.

How do I remove a toilet handle?

1. Turn off the water supply to the toilet. This is usually located under the sink or in the basement.
2. Flush the toilet to empty the bowl.
3. Use a screwdriver to remove the screws that hold the toilet handle in place. There will be one screw on each side of the handle.
4. Pull the toilet handle straight up and off of the toilet.

How do I install a toilet handle?

1. Make sure the toilet is turned off and the water supply is turned off.
2. Clean the toilet bowl and the area around the toilet handle with a damp cloth.
3. Apply a thin layer of plumber’s putty to the bottom of the new toilet handle.
4. Position the toilet handle on the toilet and press down firmly.
5. Secure the toilet handle in place with the screws that came with the new handle.

What size toilet handle do I need?

The size of the toilet handle you need will depend on the size of the toilet. Most toilet handles are either 1.25 inches or 1.5 inches in diameter.

How do I adjust a toilet handle?

If the toilet handle is loose, you can tighten it by turning the screws that hold it in place. If the toilet handle is too tight, you can loosen it by turning the screws in the opposite direction.

What is the difference between a toilet handle and a toilet flusher?

A toilet handle is the part of the toilet that you use to flush the toilet. A toilet flusher is the mechanism inside the toilet that actually flushes the toilet.

In this article, we have discussed how to fit a toilet handle. We have covered the different types of toilet handles, the tools and materials you will need, and the steps involved in the installation process. We hope that this information has been helpful and that you are now able to fit a toilet handle with confidence.

Here are a few key takeaways from this article:

• There are two main types of toilet handles: single-lever and two-piece.
• The tools and materials you will need for the installation process will vary depending on the type of handle you are installing.
• The steps involved in the installation process are generally the same for both single-lever and two-piece handles.
• It is important to follow the manufacturer’s instructions carefully when installing a toilet handle.

If you have any questions about how to fit a toilet handle, please consult with a qualified plumber.