How To Remove Bemis Toilet Seat Bolts?

How To Remove Bemis Toilet Seat Bolts

Your toilet seat is one of the most used items in your home, but it’s also one of the most neglected. Over time, the bolts that hold the seat in place can become corroded and difficult to remove. If you’re ever in need of replacing your toilet seat, it’s important to know how to remove the old one first. In this article, we’ll show you how to remove Bemis toilet seat bolts quickly and easily.

We’ll start by providing a brief overview of the process, then we’ll go into more detail on each step. By the end of this article, you’ll be able to remove your Bemis toilet seat bolts with confidence.

Step	Instructions	Image
1	Locate the toilet seat bolts. They are typically located on the back of the toilet seat, just below the rim.
2	Insert a flathead screwdriver into the slot of the toilet seat bolt and turn counterclockwise to loosen.
3	Repeat step 2 for all of the toilet seat bolts.
4	Lift up on the toilet seat and remove it from the toilet.

How To Remove Bemis Toilet Seat Bolts?

Identifying Bemis Toilet Seat Bolts

The first step to removing a Bemis toilet seat is to identify the bolts that hold it in place. These bolts are typically located on the back of the toilet seat, near the hinge. They are usually made of metal and have a hexagonal head. The number of bolts will vary depending on the model of toilet seat, but there are typically two or three.

To identify the type of bolts, you can try to unscrew them by hand. If they are tight, you can use a wrench or pliers to loosen them. If the bolts are still difficult to remove, you can try spraying them with a lubricant, such as WD-40, to make them easier to turn.

Preparing to Remove the Bolts

Before you can remove the toilet seat bolts, you will need to gather a few tools. You will need:

• A wrench or pliers
• A screwdriver
• A bucket
• A rag

You will also need to turn off the water supply to the toilet. To do this, locate the water supply valve under the sink or behind the toilet. Turn the valve clockwise to turn off the water.

Once the water supply is turned off, you can remove the toilet tank lid. To do this, locate the two nuts on the back of the tank lid. Use a wrench or pliers to loosen the nuts and remove the lid.

Removing the Bolts

Now that you have gathered your tools and turned off the water supply, you can begin removing the toilet seat bolts. To do this, follow these steps:

1. Place the bucket under the toilet seat to catch any water that may spill.
2. Use the wrench or pliers to loosen the toilet seat bolts.
3. Once the bolts are loose, you can use the screwdriver to unscrew them completely.
4. Remove the toilet seat from the toilet.

Installing a New Toilet Seat

To install a new toilet seat, follow these steps:

1. Place the new toilet seat on the toilet bowl.
2. Align the holes in the toilet seat with the bolts in the toilet bowl.
3. Insert the bolts through the holes in the toilet seat.
4. Use the wrench or pliers to tighten the bolts.
5. Replace the toilet tank lid.
6. Turn on the water supply to the toilet.

Removing and installing a Bemis toilet seat is a relatively simple task that can be completed in a few minutes. By following these steps, you can easily replace your old toilet seat with a new one.

3. Removing the Bolts

To remove the bolts from a Bemis toilet seat, you will need:

• A screwdriver
• A pair of pliers

1. Locate the bolts that hold the toilet seat in place. They are typically located on the back of the toilet seat, near the hinges.
2. Use the screwdriver to loosen the bolts. You may need to use the pliers to hold the bolt in place while you turn the screwdriver.
3. Once the bolts are loosened, you can remove them by hand.

4. Installing New Bolts

To install new bolts on a Bemis toilet seat, you will need:

• New bolts
• A screwdriver
• A pair of pliers

1. Locate the holes in the toilet seat where the bolts will go.
2. Insert the new bolts into the holes.
3. Use the screwdriver to tighten the bolts. You may need to use the pliers to hold the bolt in place while you turn the screwdriver.
4. Once the bolts are tight, you can test the toilet seat to make sure it is secure.

Testing the Toilet Seat

To test the toilet seat, sit down on it and make sure it is stable. The seat should not move or wobble. If the seat is not stable, you may need to tighten the bolts further.

How do I remove Bemis toilet seat bolts?

1. Gather your tools. You will need a Phillips head screwdriver, a flathead screwdriver, and a pair of pliers.
2. Locate the toilet seat bolts. The toilet seat bolts are located on the underside of the toilet seat, near the back.
3. Remove the caps. There are two caps covering the toilet seat bolts. Use a Phillips head screwdriver to remove the caps.
4. Loosen the bolts. Use a flathead screwdriver to loosen the toilet seat bolts. Turn the screwdriver counterclockwise.
5. Remove the toilet seat. Once the bolts are loose, you can lift up on the toilet seat and remove it.
6. Replace the toilet seat. To replace the toilet seat, simply reverse the steps above.

What if the toilet seat bolts are stuck?

If the toilet seat bolts are stuck, you can try using a penetrating oil to loosen them. Apply the oil to the bolts and let it sit for a few minutes. Then, try to loosen the bolts again using a Phillips head screwdriver.

What if I don’t have a Phillips head screwdriver?

If you don’t have a Phillips head screwdriver, you can use a flathead screwdriver to loosen the toilet seat bolts. However, this may be more difficult and you may damage the bolts.

What if I can’t reach the toilet seat bolts?

If you can’t reach the toilet seat bolts, you can try using a long-handled screwdriver or a pair of pliers. However, be careful not to damage the toilet seat or the bolts.

What if I accidentally stripped the toilet seat bolts?

If you accidentally stripped the toilet seat bolts, you can try using a bolt extractor to remove them. A bolt extractor is a tool that has a sharp tip that can grip the stripped bolt.

What if I can’t remove the toilet seat bolts?

If you can’t remove the toilet seat bolts, you may need to call a plumber for help. A plumber will have the tools and experience to remove the toilet seat bolts safely and without damaging the toilet.

In this article, we have discussed how to remove Bemis toilet seat bolts. We have covered the tools and materials you will need, as well as the steps involved in the process. We hope this information has been helpful and that you are now able to remove your Bemis toilet seat bolts with ease.

Here are some key takeaways from this article:

• To remove Bemis toilet seat bolts, you will need a screwdriver, a pair of pliers, and a rag.
• The first step is to locate the toilet seat bolts. They are typically located on the back of the toilet seat, near the hinge.
• Once you have located the bolts, use the screwdriver to loosen them. Be careful not to overtighten the bolts, as this could damage the toilet seat.
• Once the bolts are loose, use the pliers to hold the nuts in place while you turn the bolts with the screwdriver.
• Continue turning the bolts until they are completely removed.
• Wipe down the toilet seat with a rag to remove any dirt or debris.

We hope this information has been helpful. If you have any questions, please do not hesitate to contact us.