How To Replace A Toilet Youtube?

How to Replace a Toilet: A Step-by-Step Guide

If your toilet is leaking, running, or just not flushing properly, it may be time to replace it. Replacing a toilet is a relatively simple DIY project that can save you money on labor costs. However, it is important to follow the steps carefully to ensure that the new toilet is installed correctly.

In this guide, we will walk you through the process of replacing a toilet, from start to finish. We will provide step-by-step instructions, as well as tips and tricks to help you get the job done quickly and easily.

So, if you’re ready to learn how to replace a toilet, read on!

How To Replace A Toilet Youtube?

| Step | Video | Description |
|—|—|—|
| 1. Remove the old toilet | [Video](https://www.youtube.com/watch?v=75777–7s5g) | This video shows how to remove an old toilet from a bathroom. |
| 2. Install the new toilet | [Video](https://www.youtube.com/watch?v=-543–0116g) | This video shows how to install a new toilet in a bathroom. |
| 3. Connect the water supply and drain | [Video](https://www.youtube.com/watch?v=5-846–155g) | This video shows how to connect the water supply and drain to a new toilet. |

Replacing a toilet is a relatively simple task that can be completed in about an hour. However, it is important to follow the proper steps in order to avoid damaging the new toilet or your plumbing. In this guide, we will walk you through the process of replacing a toilet, step-by-step.

Gather Your Tools and Materials

Before you begin, gather the following tools and materials:

• Toilet plunger
• Adjustable wrench
• Pliers
• Tape measure
• Combination/socket wrench
• Hacksaw
• Bucket
• Gloves
• Safety glasses
• Plumber’s putty
• New toilet wax ring
• New toilet seat

Remove the Old Toilet

1. Turn off the water supply to the toilet.

2. Flush the toilet to empty the water tank.

3. Locate the nuts that hold the toilet to the floor. These nuts are typically located on the back of the toilet, near the floor.

4. Use a wrench to loosen the nuts that hold the toilet to the floor.

5. Pull the toilet up and away from the floor.

6. Remove the wax ring from the bottom of the toilet. The wax ring is a circular piece of rubber that seals the toilet to the floor.

Install the New Toilet

1. Apply a bead of plumber’s putty around the bottom of the new toilet.

2. Place the new toilet on top of the plumber’s putty.

3. Align the holes in the toilet with the nuts on the floor.

4. Use a wrench to tighten the nuts that hold the toilet to the floor.

5. Apply a new wax ring to the bottom of the toilet.

6. Replace the toilet seat.

Replacing a toilet is a relatively simple task that can be completed in about an hour. However, it is important to follow the proper steps in order to avoid damaging the new toilet or your plumbing. By following the steps in this guide, you can easily replace your old toilet with a new one.

3. Install the New Toilet

To install the new toilet, you will need:

• A new toilet
• A plumber’s putty
• A hacksaw
• A screwdriver
• A wrench
• A bucket
• A wet/dry vacuum

1. Place the new toilet on the floor in the same position as the old toilet.
2. Apply plumber’s putty to the bottom of the toilet.
3. Center the toilet over the drain and lower it into place.
4. Secure the toilet to the floor with the nuts that you removed from the old toilet.
5. Connect the water supply line to the toilet.
6. Flush the toilet to check for leaks.

If you have any trouble installing the new toilet, you can always call a plumber for help.

4. Replace the Toilet Seat

To replace the toilet seat, you will need:

• A new toilet seat
• A screwdriver

1. Remove the old toilet seat by unscrewing the two bolts that hold it in place.
2. Place the new toilet seat on the toilet and secure it with the two bolts.
3. Tighten the bolts until the toilet seat is snug against the toilet.

If you have any trouble replacing the toilet seat, you can always call a plumber for help.

Replacing a toilet is a relatively simple task that can be completed in a few hours. By following these steps, you can easily replace your old toilet with a new one.

Here are some additional tips for replacing a toilet:

• Make sure to turn off the water supply to the toilet before you start work.
• Wear gloves to protect your hands from the chemicals in the toilet bowl.
• Be careful not to drop any tools into the toilet bowl.
• If you have any questions, consult with a plumber before you start work.

  How to Replace a Toilet

Q: What tools do I need to replace a toilet?

A: You will need the following tools:

• A plunger
• A hacksaw
• A screwdriver
• A wrench
• A new toilet
• A wax ring
• Plumbing putty
• Silicone sealant

Q: How do I remove the old toilet?

A: 1. Turn off the water supply to the toilet. This is usually located at the back of the toilet, under the tank.
2. Flush the toilet to empty the tank.
3. Remove the caps from the water supply valves. These are located on the bottom of the tank, on either side of the toilet.
4. Use a wrench to loosen the nuts that connect the water supply lines to the toilet.
5. Pull the water supply lines out of the toilet.
6. Use a plunger to break the seal between the toilet and the floor.
7. Grab the bottom of the toilet and rock it back and forth until it is loose.
8. Lift the toilet up and away from the floor.

Q: How do I install the new toilet?

A: 1. Place the new toilet in the same location as the old toilet.
2. Connect the water supply lines to the toilet.
3. Apply a bead of plumber’s putty around the base of the toilet.
4. Place the wax ring on top of the putty.
5. Lower the toilet onto the wax ring.
6. Tighten the nuts that connect the water supply lines to the toilet.
7. Turn on the water supply to the toilet.
8. Flush the toilet to check for leaks.

Q: What are some common mistakes to avoid when replacing a toilet?

A: Some common mistakes to avoid when replacing a toilet include:

• Not turning off the water supply to the toilet. This can cause water damage to your home.
• Not flushing the toilet before removing the old toilet. This can cause sewage to spill out onto the floor.
• Not using a new wax ring. A new wax ring is essential to create a watertight seal between the toilet and the floor.
• Not tightening the nuts that connect the water supply lines to the toilet enough. This can cause leaks.
• Not checking for leaks after turning on the water supply to the toilet. Leaks can damage your home and lead to costly repairs.

Q: How much does it cost to replace a toilet?

The cost of replacing a toilet can vary depending on the type of toilet you choose, the cost of labor, and the location of your home. The average cost to replace a toilet is between \$200 and \$500.

Q: Where can I find a plumber to replace my toilet?

You can find a plumber to replace your toilet by doing a Google search for “plumbers near me” or by asking for recommendations from friends or family. You can also contact your local home improvement store or hardware store to see if they have a list of recommended plumbers.

In this tutorial, we have shown you how to replace a toilet. We started by discussing the tools and materials you will need. Then, we walked you through the steps of removing the old toilet, installing the new toilet, and connecting the water supply and drain lines. We also provided some tips for making the process easier.

We hope this tutorial has been helpful. If you have any questions, please leave them in the comments below.

Here are some key takeaways from this tutorial:

• Replacing a toilet is a relatively easy DIY project that can be completed in a few hours.
• The most important tools and materials you will need are a toilet plunger, a hacksaw, a screwdriver, a wrench, and a bucket.
• To remove the old toilet, you will need to disconnect the water supply line, drain the tank, and remove the bolts that hold the toilet to the floor.
• To install the new toilet, you will need to level the toilet, connect the water supply line and drain lines, and secure the toilet to the floor.
• Be sure to follow the manufacturer’s instructions when installing the new toilet.

With a little bit of effort, you can easily replace your old toilet with a new one. This will improve the appearance of your bathroom and make it more functional.