How to Replace a Bathtub Faucet Handle (Step-by-Step Guide)

How to Change a Bathtub Faucet Handle

Your bathtub faucet handle is one of the most-used parts of your bathroom, so it’s important to keep it in good working order. If your faucet handle is broken or leaking, it’s a relatively simple fix that you can do yourself with a few tools and a few minutes of time.

In this article, we’ll walk you through the steps of how to change a bathtub faucet handle. We’ll cover everything from identifying the type of faucet you have to removing the old handle and installing the new one. So whether you’re a DIY novice or a seasoned pro, read on for all the information you need to know about changing a bathtub faucet handle.

Step	Instructions	Image
1	Turn off the water supply to the faucet.
2	Remove the old handle by unscrewing the set screws.
3	Install the new handle by screwing it onto the faucet stem.
4	Turn on the water supply to the faucet and test the new handle.

How To Change A Bathtub Faucet Handle?

Tools and Materials

• Adjustable wrench
• Screwdriver
• Penetrating oil
• New faucet handle

Step 1: Turn Off the Water

1. Shut off the water supply to the bathtub faucet. This is usually located under the sink or behind the toilet.
2. Drain the water from the bathtub.

Step 2: Remove the Old Handle

1. Locate the set screws that hold the old handle in place. These are usually located on the back of the handle, near the base.
2. Use a screwdriver to loosen the set screws.
3. Remove the old handle.

Step 3: Install the New Handle

1. Apply a small amount of penetrating oil to the threads of the new handle.
2. Insert the new handle into the faucet body.
3. Tighten the set screws until the handle is secure.

Step 4: Turn on the Water

1. Turn on the water supply to the bathtub faucet.
2. Check for leaks.

Changing a bathtub faucet handle is a relatively simple task that can be completed in a few minutes. By following these steps, you can easily replace a broken or worn-out handle with a new one.

Here are some additional tips for changing a bathtub faucet handle:

• If the set screws are stuck, you can try using a penetrating oil or a heat gun to loosen them.
• Be careful not to overtighten the set screws, as this could damage the faucet.
• If you are not comfortable working with plumbing fixtures, you may want to hire a professional to replace the faucet handle for you.

Changing a bathtub faucet handle is a great way to update the look of your bathroom and improve the functionality of your faucet. By following these steps, you can easily complete this task yourself.

Step 1: Gather Your Materials

To change a bathtub faucet handle, you will need the following materials:

• A screwdriver
• Penetrating oil
• New faucet handle
• Replacement washers (if necessary)

Step 2: Remove the Old Handle

1. Locate the screws that hold the old handle in place. They are typically located on the back of the handle, near the base of the faucet.
2. Use a screwdriver to loosen the screws and remove the old handle.
3. Pry off the old handle. You may need to use a flathead screwdriver or a pry bar to do this.

Step 3: Install the New Handle

1. Apply a small amount of penetrating oil to the threads of the new handle. This will help to prevent the handle from sticking.
2. Insert the new handle into the faucet and tighten the screws.
3. Replace any washers that were removed in Step 2.

Step 4: Test the Faucet

Turn on the water and test the faucet to make sure that it is working properly. If the faucet is not working properly, you may need to adjust the screws or replace the washers.

Changing a bathtub faucet handle is a relatively simple task that can be completed in a few minutes. By following these steps, you can easily replace a broken or damaged handle and restore your faucet to working order.

How do I remove a bathtub faucet handle?

1. Turn off the water supply to the faucet.
2. Remove the screws that hold the handle in place.
3. Pry the handle off of the faucet body using a flathead screwdriver.
4. Clean the faucet body and install the new handle.

What tools do I need to change a bathtub faucet handle?

You will need the following tools to change a bathtub faucet handle:

• A flathead screwdriver
• A Phillips head screwdriver
• A wrench
• Penetrating oil

**How long does it take to change a bathtub faucet handle?

It typically takes about 30 minutes to change a bathtub faucet handle.

**What is the difference between a single-handle and a double-handle faucet?

A single-handle faucet has a single lever that controls both the hot and cold water. A double-handle faucet has two separate levers, one for the hot water and one for the cold water.

**Which type of faucet is better, a single-handle or a double-handle faucet?

There is no definitive answer to this question. It depends on your personal preference and the type of faucet you are looking for. Single-handle faucets are typically easier to use, while double-handle faucets offer more control over the temperature of the water.

**How do I know if my bathtub faucet is leaking?

There are a few signs that your bathtub faucet is leaking:

• Water running from the faucet even when it is turned off
• A puddle of water under the faucet
• A whistling or dripping sound coming from the faucet

**How do I fix a leaking bathtub faucet?

There are a few ways to fix a leaking bathtub faucet. The best way to fix the leak depends on the type of faucet you have.

• If you have a single-handle faucet, you can try tightening the screws that hold the handle in place. If that doesn’t work, you can try replacing the O-ring inside the faucet.
• If you have a double-handle faucet, you can try tightening the screws that hold the handles in place. If that doesn’t work, you can try replacing the washers inside the faucet.

**What should I do if I can’t fix my bathtub faucet myself?

If you can’t fix your bathtub faucet yourself, you should call a plumber. A plumber will be able to diagnose the problem and fix the leak.

Changing a bathtub faucet handle is a relatively simple task that can be completed in a few minutes with the right tools and instructions. In this blog post, we have outlined the steps involved in replacing a bathtub faucet handle, as well as provided tips and tricks to make the process easier. By following these steps, you can easily and safely replace your bathtub faucet handle and restore your bathroom to its former glory.

Here are the key takeaways from this blog post:

• Before you begin, make sure you have the right tools and materials. You will need a screwdriver, a wrench, and a new faucet handle.
• Turn off the water supply to the bathtub. This will prevent any water from leaking while you are working.
• Remove the old faucet handle. To do this, you will need to unscrew the screws that hold it in place.
• Install the new faucet handle. This is simply a matter of reversing the steps you took to remove the old handle.
• Turn on the water supply to the bathtub and test the new faucet handle. Make sure that the water is flowing properly and that the handle is working correctly.

By following these steps, you can easily and safely replace your bathtub faucet handle. With a new faucet handle, your bathroom will look and function better than ever before.