How to Replace a Kohler Faucet Cartridge (Step-by-Step Guide)

How to Replace a Kohler Faucet Cartridge

Your Kohler faucet is one of the most important fixtures in your home. It’s what you use to turn on the water to wash your hands, brush your teeth, and take a shower. But what happens when your faucet starts to leak or drip? If you’re not sure how to fix it, you might be tempted to call a plumber. But before you do, you should know that replacing a Kohler faucet cartridge is a relatively simple task that you can do yourself.

In this article, we’ll walk you through the steps of replacing a Kohler faucet cartridge. We’ll provide you with detailed instructions and images, so you can be confident that you’re doing the job correctly. So if your Kohler faucet is giving you trouble, read on to learn how to fix it!

“`html

Step	Instructions	Image
1	Turn off the water supply to the faucet.
2	Remove the handle by unscrewing the setscrews.
3	Remove the old cartridge by unscrewing it from the body of the faucet.
4	Insert the new cartridge into the body of the faucet and tighten it until it is snug.
5	Replace the handle and tighten the setscrews.
6	Turn on the water supply to the faucet and test it to make sure it is working properly.

“`

Kohler faucets are known for their durability and longevity, but even the best faucets eventually need to be replaced. If your Kohler faucet is leaking, dripping, or not working properly, it may be time to replace the cartridge. A cartridge is a small, cylindrical valve that controls the flow of water through the faucet. It is located inside the faucet body and is usually made of plastic or metal.

Replacing a Kohler faucet cartridge is a relatively simple task that can be completed in about 30 minutes. However, it is important to follow the steps carefully to avoid damaging the faucet.

Tools and Materials Needed

• Replacement cartridge
• Adjustable wrench
• Penetrating oil
• Pliers
• Screwdriver

Steps to Remove the Old Cartridge

1. Turn off the water supply to the faucet.
2. Disconnect the hoses from the faucet body.
3. Remove the screws that hold the faucet handle in place.
4. Pry off the handle.
5. Use a wrench to loosen the locknut that holds the cartridge in place.
6. Remove the cartridge.
7. Apply penetrating oil to the threads of the new cartridge.
8. Insert the new cartridge into the faucet body.
9. Tighten the locknut.
10. Reattach the handle.
11. Reconnect the hoses to the faucet body.
12. Turn on the water supply to the faucet.

Replacing a Kohler faucet cartridge is a relatively simple task that can be completed in about 30 minutes. However, it is important to follow the steps carefully to avoid damaging the faucet. If you are not comfortable doing this yourself, you can always hire a plumber to do the job for you.

How To Replace Kohler Faucet Cartridge?

Kohler faucets are known for their durability and quality, but even the best faucets eventually need to be repaired or replaced. If your Kohler faucet is leaking, dripping, or not working properly, you may need to replace the cartridge. This is a relatively simple task that can be completed in just a few minutes.

Here is a step-by-step guide on how to replace a Kohler faucet cartridge:

1. Gather your tools

To replace a Kohler faucet cartridge, you will need the following tools:

• A flathead screwdriver
• A Phillips head screwdriver
• A pair of pliers
• A new cartridge

2. Turn off the water supply to the faucet

Before you can begin replacing the cartridge, you must first turn off the water supply to the faucet. This will prevent any water from coming out of the faucet while you are working on it.

To turn off the water supply to the faucet, locate the shut-off valve. This is usually located near the faucet, either under the sink or behind the wall. Turn the valve clockwise until it is completely closed.

3. Locate the cartridge housing under the faucet

The cartridge housing is located under the faucet. It is a small, cylindrical-shaped object that is usually made of plastic or metal.

To locate the cartridge housing, look under the faucet for a small hole. This hole is where the cartridge is located.

4. Remove the old cartridge

Once you have located the cartridge housing, you can begin to remove the old cartridge.

To remove the cartridge, you will need to use a flathead screwdriver to pry off the retaining clip. The retaining clip is a small, metal clip that holds the cartridge in place.

Once you have pried off the retaining clip, you can remove the old cartridge. To do this, simply grasp the cartridge and pull it out of the housing.

5. Install the new cartridge

Now that you have removed the old cartridge, you can install the new one.

To install the new cartridge, simply insert it into the housing and snap the retaining clip back into place.

6. Turn on the water supply to the faucet

Now that you have installed the new cartridge, you can turn on the water supply to the faucet.

To do this, simply turn the shut-off valve counterclockwise until it is fully open.

7. Test the faucet

Now that you have turned on the water supply to the faucet, you can test it to make sure that it is working properly.

To test the faucet, turn on the faucet and let it run for a few minutes. Make sure that the faucet is not leaking and that it is working properly.

If the faucet is not working properly, you may need to repeat the steps above.

Replacing a Kohler faucet cartridge is a relatively simple task that can be completed in just a few minutes. By following the steps above, you can easily replace your old cartridge with a new one and get your faucet back up and running in no time.

How do I know if my Kohler faucet cartridge needs to be replaced?

There are a few signs that your Kohler faucet cartridge may need to be replaced. These include:

• The faucet is leaking from the base or spout.
• The faucet is dripping even when it is turned off.
• The faucet is difficult to turn on or off.
• The water pressure from the faucet is weak.

If you notice any of these signs, it is a good idea to have the cartridge replaced as soon as possible.

How do I remove the old cartridge?

1. Turn off the water supply to the faucet.
2. Locate the cartridge housing under the sink.
3. Remove the screws that hold the cartridge housing in place.
4. Pull the cartridge housing out of the faucet.
5. Remove the old cartridge from the cartridge housing.

How do I install the new cartridge?

1. Make sure the new cartridge is the correct size for your faucet.
2. Apply a thin coat of plumber’s grease to the O-rings on the new cartridge.
3. Insert the new cartridge into the cartridge housing.
4. Replace the cartridge housing in the faucet.
5. Secure the cartridge housing with the screws.
6. Turn on the water supply to the faucet.

What are the common causes of Kohler faucet cartridge failure?

There are a few common causes of Kohler faucet cartridge failure. These include:

• Hard water: Hard water can cause the mineral deposits to build up on the cartridge, which can eventually lead to it becoming stuck or damaged.
• Improper installation: If the cartridge is not installed correctly, it can lead to premature wear and tear.
• Overtightening: Overtightening the cartridge can damage the O-rings, which can lead to leaks.
• Under-tightening: Under-tightening the cartridge can cause the cartridge to come loose, which can also lead to leaks.

How can I prevent Kohler faucet cartridge failure?

There are a few things you can do to help prevent Kohler faucet cartridge failure. These include:

• Using a water softener to soften hard water.
• Having the cartridge replaced regularly (every 5-10 years).
• Installing the cartridge correctly.
• Not overtightening or under-tightening the cartridge.

By following these tips, you can help extend the life of your Kohler faucet cartridge and avoid costly repairs.

In this blog post, we have discussed how to replace a Kohler faucet cartridge. We have provided step-by-step instructions, as well as tips and tricks to make the process easier. We hope that this information has been helpful, and that you are now able to replace your Kohler faucet cartridge with confidence.

Here are a few key takeaways from this blog post:

• Replacing a Kohler faucet cartridge is a relatively simple task that can be completed in a few minutes.
• Before you begin, make sure you have the necessary tools and materials.
• Follow the steps in the instructions carefully, and be sure to turn off the water supply before you begin.
• If you are not comfortable doing this yourself, you can always call a professional plumber.