How to Reset Your Pur Faucet Filter Light | Step-by-Step Instructions

AvatarByLiana Farrell Faucet Queries

How to Reset the Pur Faucet Filter Light

Your Pur faucet filter is a great way to improve the taste and quality of your tap water. But what do you do when the filter light starts blinking? Don’t worry, resetting the filter light is easy.

In this article, we’ll show you how to reset the filter light on your Pur faucet filter in just a few simple steps. We’ll also provide some tips on how to keep your filter running smoothly and efficiently.

So if your filter light is blinking, read on for all the information you need to know.

“`html

Step Action Explanation
1 Turn off the water supply to the faucet. This will prevent any water from flowing through the filter while you are resetting it.
2 Locate the reset button on the faucet filter. The reset button is usually located on the back of the filter housing.
3 Press and hold the reset button for 5 seconds. This will reset the filter light and clear any error codes.
4 Turn on the water supply to the faucet. The filter light should now be off.

“`

What is the Pur Faucet Filter Light?

The Pur Faucet Filter Light is a small, green light that indicates when your Pur faucet filter needs to be replaced. The light will turn on when the filter has reached its capacity and needs to be replaced in order to continue providing clean, filtered water.

How do you know when the Pur Faucet Filter Light is on?

The Pur Faucet Filter Light is located on the front of the faucet, near the spout. The light is green when the filter is new and working properly. When the filter needs to be replaced, the light will turn red.

How to Reset the Pur Faucet Filter Light

If the Pur Faucet Filter Light is on, you can reset it by following these steps:

1. Turn off the water supply to the faucet.
2. Remove the filter from the faucet.
3. Rinse the filter under running water.
4. Replace the filter in the faucet.
5. Turn on the water supply to the faucet.

The Pur Faucet Filter Light should now be off.

**

When to Replace the Pur Faucet Filter

The Pur Faucet Filter should be replaced every 6 months. However, if you use your faucet frequently, you may need to replace the filter more often.

To determine if your filter needs to be replaced, you can check the Pur Faucet Filter Light. If the light is on, the filter needs to be replaced.

You can also check the filter itself for signs of wear and tear. If the filter is clogged or dirty, it needs to be replaced.

**

Troubleshooting Tips

If the Pur Faucet Filter Light is not turning on, there may be a problem with the filter or the faucet. Here are some troubleshooting tips:

  • Make sure that the filter is installed correctly.
  • Make sure that the water supply to the faucet is turned on.
  • Try resetting the filter by following the steps above.
  • If the problem persists, contact Pur customer service for assistance.

The Pur Faucet Filter Light is a helpful tool that lets you know when your filter needs to be replaced. By following the steps above, you can easily reset the filter light and keep your water clean and filtered.

How to reset the Pur Faucet Filter Light

The Pur faucet filter light is a helpful indicator that lets you know when it’s time to change your filter. However, sometimes the light can come on even when your filter is new, or it may not turn off after you’ve changed the filter. If this happens, you may need to reset the light.

To reset the Pur faucet filter light, follow these steps:

1. Turn off the water supply to the faucet.
2. Remove the filter housing from the faucet.
3. Locate the reset button on the filter housing. It’s a small, round button, usually located near the bottom of the housing.
4. Press and hold the reset button for about 5 seconds.
5. Replace the filter housing and turn on the water supply to the faucet.

The filter light should now be turned off. If it’s not, try resetting it again. If you’re still having trouble, contact Pur customer support for assistance.

Troubleshooting

If the Pur faucet filter light is not turning off after you’ve reset it, there are a few things you can check:

  • Make sure that you’ve pressed and held the reset button for long enough. The button needs to be pressed for about 5 seconds in order to reset the light.
  • Check the filter housing to make sure that it’s properly installed. The housing should be snug against the faucet, and there should be no leaks.
  • If the filter housing is properly installed and you’ve still had trouble resetting the light, you may need to replace the filter.

To replace the filter, follow these steps:

1. Turn off the water supply to the faucet.
2. Remove the filter housing from the faucet.
3. Remove the old filter from the housing.
4. Insert the new filter into the housing.
5. Replace the filter housing and turn on the water supply to the faucet.

The filter light should now be turned off. If it’s not, contact Pur customer support for assistance.

The Pur faucet filter light is a helpful indicator that lets you know when it’s time to change your filter. However, sometimes the light can come on even when your filter is new, or it may not turn off after you’ve changed the filter. If this happens, you may need to reset the light.

To reset the Pur faucet filter light, follow these steps:

1. Turn off the water supply to the faucet.
2. Remove the filter housing from the faucet.
3. Locate the reset button on the filter housing.
4. Press and hold the reset button for about 5 seconds.
5. Replace the filter housing and turn on the water supply to the faucet.

The filter light should now be turned off. If it’s not, try resetting it again. If you’re still having trouble, contact Pur customer support for assistance.

How do I reset my Pur faucet filter light?

1. Turn off the water supply to the faucet.
2. Remove the filter housing from the faucet.
3. Locate the reset button on the inside of the filter housing.
4. Press and hold the reset button for 5 seconds.
5. Reattach the filter housing to the faucet.
6. Turn on the water supply to the faucet.

The filter light should now be off.

What does the light on my Pur faucet filter mean?

The light on your Pur faucet filter indicates that the filter needs to be replaced. The light will turn on when the filter has reached its capacity and can no longer remove impurities from the water.

How often do I need to replace my Pur faucet filter?

The frequency with which you need to replace your Pur faucet filter depends on the quality of your water and the amount of water you use. In general, you should replace the filter every 6 months to 1 year.

Can I clean my Pur faucet filter instead of replacing it?

You can clean your Pur faucet filter, but it is not recommended. Cleaning the filter will not extend its lifespan and may actually damage the filter. It is best to replace the filter every 6 months to 1 year.

What happens if I don’t replace my Pur faucet filter?

If you do not replace your Pur faucet filter, the filter will eventually become clogged and will no longer be able to remove impurities from the water. This can lead to a decrease in water quality and may even cause health problems.

Where can I buy a replacement Pur faucet filter?

You can buy a replacement Pur faucet filter at most home improvement stores or online retailers.

In this blog post, we have discussed how to reset the Pur faucet filter light. We have provided step-by-step instructions on how to do this, as well as some troubleshooting tips. We hope that this information has been helpful to you. If you have any further questions, please do not hesitate to contact us.

Author Profile

Liana Farrell
Liana Farrell
Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.

Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”

Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.