How To Replace Korky Toilet Kit?

AvatarByLiana Farrell Toilet Queries

How to Replace a Korky Toilet Kit

Your toilet is one of the most important fixtures in your home, and it’s important to keep it in good working order. If your toilet is leaking, running, or making strange noises, it may be time to replace the toilet kit. A Korky toilet kit is a complete set of parts that you can use to replace the old parts on your toilet. This guide will walk you through the steps of replacing a Korky toilet kit, so you can get your toilet back up and running in no time.

What You’ll Need

To replace a Korky toilet kit, you will need the following materials:

  • A new Korky toilet kit
  • A Phillips head screwdriver
  • A flathead screwdriver
  • A pair of pliers
  • A bucket
  • A wet/dry vacuum

Step-by-Step Instructions

1. Turn off the water supply to the toilet. This is usually located behind the toilet, near the floor.
2. Flush the toilet to drain the water from the tank.
3. Remove the old toilet tank lid. This is usually held in place by two screws on the back of the tank.
4. Remove the old toilet tank bolts. These are located on the bottom of the tank, and they are usually held in place by nuts.
5. Lift the toilet tank off of the bowl. Be careful not to spill any water.
6. Remove the old toilet flapper. This is a rubber disk that sits in the bottom of the tank and seals the opening to the bowl.
7. Remove the old toilet fill valve. This is a plastic or metal valve that sits on the back of the tank and supplies water to the toilet bowl.
8. Install the new toilet flapper and fill valve. Make sure that the flapper is seated properly in the bottom of the tank, and that the fill valve is properly aligned with the water supply line.
9. Replace the toilet tank bolts.
10. Replace the toilet tank lid.
11. Turn on the water supply to the toilet.
12. Flush the toilet to test the new toilet kit.

Step Instructions Image
1 Turn off the water supply to the toilet.
2 Remove the old toilet tank lid.
3 Remove the old Korky toilet kit.
4 Install the new Korky toilet kit.
5 Turn the water supply back on to the toilet.

Gather your tools and materials

To replace a Korky toilet kit, you will need the following tools and materials:

  • A new Korky toilet kit
  • A screwdriver
  • A pair of pliers
  • A bucket
  • A wet/dry vacuum cleaner
  • Plumbing putty
  • A new wax ring

Turn off the water supply to the toilet

Before you can begin replacing the Korky toilet kit, you will need to turn off the water supply to the toilet. This can be done by turning the shut-off valve located under the sink or behind the toilet. Once the water supply is turned off, flush the toilet to drain any remaining water.

Remove the old toilet tank lid

The next step is to remove the old toilet tank lid. To do this, locate the two screws on the top of the tank and unscrew them using a screwdriver. Once the screws are removed, the tank lid can be lifted off.

Remove the old toilet tank bolts

There are two bolts located on the bottom of the toilet tank that hold the tank to the bowl. Using a pair of pliers, loosen and remove these bolts. Once the bolts are removed, the tank can be lifted off of the bowl.

Disconnect the water supply line

The water supply line connects the toilet tank to the water supply valve. To disconnect the water supply line, use a pair of pliers to loosen the nut on the end of the line. Once the nut is loosened, the water supply line can be removed from the tank.

Remove the old wax ring

The wax ring is a rubber ring that seals the toilet tank to the bowl. To remove the old wax ring, use a putty knife to scrape it off of the toilet bowl. Be careful not to damage the toilet bowl.

Apply new plumber’s putty

Once the old wax ring has been removed, apply a new bead of plumber’s putty around the base of the toilet bowl. This will help to create a seal between the toilet tank and the bowl.

Install the new toilet tank

The new toilet tank can now be installed. Place the tank on top of the bowl and align the holes in the tank with the bolts in the bowl. Insert the bolts through the holes and tighten them using a screwdriver.

Connect the water supply line

The water supply line can now be reconnected to the toilet tank. Insert the end of the line into the valve on the tank and tighten the nut on the end of the line.

Turn on the water supply to the toilet

Now that the toilet tank is installed, you can turn on the water supply to the toilet. Flush the toilet to make sure that there are no leaks.

Replace the toilet tank lid

The final step is to replace the toilet tank lid. Place the lid on top of the tank and align the screws. Insert the screws through the holes in the lid and tighten them using a screwdriver.

Replacing a Korky toilet kit is a relatively simple task that can be completed in a few minutes. By following these steps, you can easily replace your old toilet kit with a new one.

How To Replace Korky Toilet Kit?

3. Remove the old toilet tank lid

To remove the old toilet tank lid, you will need to:

1. Find the two nuts that are located on the underside of the toilet tank lid. These nuts are usually located near the front and back of the tank.
2. Use a wrench to loosen the nuts.
3. Once the nuts are loose, you can lift up on the toilet tank lid and remove it.

4. Remove the old toilet tank bolts

To remove the old toilet tank bolts, you will need to:

1. Find the two bolts that are located on the bottom of the toilet tank. These bolts are usually located near the front and back of the tank.
2. Use a wrench to loosen the bolts.
3. Once the bolts are loose, you can lift up on the toilet tank and remove it.

Replacing a Korky toilet kit is a relatively simple task that can be completed in a few minutes. By following these steps, you can easily replace your old toilet kit and have a working toilet again in no time.

How To Replace Korky Toilet Kit?

Q: What are the tools I need to replace a Korky toilet kit?

A: You will need the following tools to replace a Korky toilet kit:

  • A flat-head screwdriver
  • A Phillips-head screwdriver
  • A pair of pliers
  • A new Korky toilet kit

Q: How do I remove the old toilet tank?

A: To remove the old toilet tank, follow these steps:

1. Turn off the water supply to the toilet.
2. Flush the toilet to drain the water from the tank.
3. Remove the two nuts that connect the toilet tank to the toilet bowl.
4. Pull the toilet tank straight up and off of the toilet bowl.

Q: How do I install the new toilet tank?

A: To install the new toilet tank, follow these steps:

1. Place the new toilet tank on top of the toilet bowl.
2. Align the holes in the tank with the bolts in the bowl.
3. Insert the bolts through the holes in the tank and into the bolts in the bowl.
4. Tighten the nuts on the bolts to secure the tank to the bowl.

Q: How do I connect the water supply to the new toilet tank?

A: To connect the water supply to the new toilet tank, follow these steps:

1. Turn on the water supply to the toilet.
2. Connect the water supply line to the valve on the bottom of the tank.
3. Tighten the connection with a wrench.

Q: How do I test the new toilet kit?

A: To test the new toilet kit, follow these steps:

1. Flush the toilet.
2. Check for leaks around the tank and bowl.
3. Make sure the toilet is working properly.

If you have any problems replacing your Korky toilet kit, please consult a qualified plumber.

In this blog post, we have discussed how to replace a Korky toilet kit. We have provided step-by-step instructions, as well as tips and tricks to help you complete the job successfully. We hope that this information has been helpful, and that you are now able to replace your Korky toilet kit with ease.

Here are some key takeaways from this blog post:

  • Before you begin, make sure you have all of the necessary tools and materials.
  • Turn off the water supply to the toilet and flush the toilet to drain the water from the tank.
  • Remove the old toilet tank lid and the old tank bolts.
  • Remove the old flapper and chain assembly.
  • Install the new flapper and chain assembly.
  • Install the new tank bolts and tighten them securely.
  • Turn on the water supply to the toilet and flush the toilet to check for leaks.

We hope that this blog post has been helpful, and that you are now able to replace your Korky toilet kit with ease. If you have any questions, please do not hesitate to contact us.

Author Profile

Liana Farrell
Liana Farrell
Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.

Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”

Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.