How to Replace a Two-Handle Bathtub Faucet: A Step-by-Step Guide

AvatarByLiana Farrell Faucet Queries

How to Replace a Two-Handle Bathtub Faucet

Your bathtub faucet is one of the most important fixtures in your bathroom. It’s used for everything from taking a bath to washing your hands. But what happens when your faucet starts to leak or malfunction? If you’re handy, you may be able to fix it yourself by replacing the faucet. Replacing a two-handle bathtub faucet is a relatively simple task that can be completed in a few hours. In this article, we’ll walk you through the steps of replacing a two-handle bathtub faucet, so you can get your bathroom back in working order in no time.

Step Instructions Image
1 Turn off the water supply to the faucet.
2 Remove the old faucet by unscrewing the nuts that hold it in place.
3 Apply a thin coat of plumber’s putty to the threads of the new faucet.
4 Screw the new faucet into place and tighten the nuts.
5 Turn on the water supply to the faucet and test it to make sure it is working properly.

How to Replace a Two Handle Bathtub Faucet?

A bathtub faucet is a plumbing fixture that allows you to control the flow of hot and cold water to your bathtub. It is typically located on the side of the bathtub, and it consists of two handles, one for hot water and one for cold water.

Over time, bathtub faucets can become worn out and start to leak. If this happens, you will need to replace the faucet. This is a relatively simple task that can be completed in about an hour.

In this guide, we will walk you through the steps of replacing a two handle bathtub faucet. We will provide detailed instructions and images to help you along the way.

Gather your tools and materials

Before you begin, you will need to gather the following tools and materials:

  • Two new faucet handles
  • Adjustable wrench
  • Penetrating oil
  • Pliers
  • Tape measure
  • Screwdriver
  • Tub drain wrench

Turn off the water supply to the faucet

The first step is to turn off the water supply to the faucet. This will prevent any water from leaking out while you are working on the faucet.

To do this, locate the shut-off valves for the hot and cold water supplies to the faucet. These valves are typically located behind the faucet, near the wall.

Turn the valves clockwise to turn off the water.

Remove the old faucet handles

The next step is to remove the old faucet handles. To do this, you will need to use a screwdriver to remove the screws that hold the handles in place.

Once the screws are removed, you can pull the handles off of the faucet.

Disconnect the water supply lines

The next step is to disconnect the water supply lines from the faucet. To do this, you will need to use a wrench to loosen the nuts that connect the lines to the faucet.

Once the nuts are loosened, you can disconnect the lines from the faucet.

Remove the old faucet

The next step is to remove the old faucet. To do this, you will need to use a wrench to loosen the nuts that hold the faucet in place.

Once the nuts are loosened, you can pull the faucet out of the wall.

Install the new faucet

The next step is to install the new faucet. To do this, you will need to reverse the steps that you took to remove the old faucet.

First, you will need to attach the water supply lines to the faucet. Then, you will need to attach the faucet handles to the faucet.

Finally, you will need to turn on the water supply to the faucet and check for leaks.

Replacing a two handle bathtub faucet is a relatively simple task that can be completed in about an hour. By following the steps in this guide, you can easily replace your old faucet with a new one.

Here are some additional tips for replacing a two handle bathtub faucet:

  • Make sure that you turn off the water supply to the faucet before you begin.
  • Use a penetrating oil to loosen the nuts that hold the faucet in place.
  • Be careful not to damage the new faucet when you are installing it.
  • Check for leaks after you have finished installing the new faucet.

If you have any questions about replacing a two handle bathtub faucet, you can contact a licensed plumber for assistance.

Remove the old faucet handles

To remove the old faucet handles, you will need:

  • An adjustable wrench

1. Turn off the water supply to the faucet.
2. Locate the nuts that hold the faucet handles in place. They are typically located on the underside of the faucet, near the base.
3. Use the adjustable wrench to loosen the nuts.
4. Once the nuts are loose, you can pull the faucet handles straight off of the faucet.

Remove the old faucet body

To remove the old faucet body, you will need:

  • An adjustable wrench
  • A plumber’s putty knife

1. Turn off the water supply to the faucet.
2. Locate the nuts that hold the faucet body in place. They are typically located on the underside of the faucet, near the base.
3. Use the adjustable wrench to loosen the nuts.
4. Once the nuts are loose, you can use the plumber’s putty knife to pry the faucet body off of the faucet.

Install the new faucet body

To install the new faucet body, you will need:

  • A new faucet body
  • A plumber’s putty
  • A plumber’s tape
  • An adjustable wrench
  • A basin wrench

1. Apply a bead of plumber’s putty around the base of the new faucet body.
2. Thread the new faucet body onto the faucet stem.
3. Tighten the nuts that hold the faucet body in place with the adjustable wrench.
4. Use the basin wrench to tighten the nuts that hold the faucet handles in place.

Install the new faucet handles

To install the new faucet handles, you will need:

  • New faucet handles
  • A plumber’s putty
  • A plumber’s tape
  • An adjustable wrench

1. Apply a bead of plumber’s putty around the base of the new faucet handles.
2. Thread the new faucet handles onto the faucet body.
3. Tighten the nuts that hold the faucet handles in place with the adjustable wrench.

Turn on the water supply and test the faucet

Once you have installed the new faucet, turn on the water supply and test the faucet to make sure it is working properly.

Replacing a two-handle bathtub faucet is a relatively simple task that can be completed in a few hours. By following these steps, you can easily replace your old faucet with a new one that will provide you with years of trouble-free service.

How to Replace a Two Handle Bathtub Faucet?

Q: What tools do I need to replace a two handle bathtub faucet?

A: You will need the following tools:

  • A set of pliers
  • A screwdriver
  • A wrench
  • A bucket
  • A new faucet
  • Plumbing tape
  • Silicone sealant

Q: How do I remove the old faucet?

A: 1. Turn off the water supply to the faucet.
2. Disconnect the water supply lines from the faucet.
3. Remove the screws that hold the faucet to the sink.
4. Pull the faucet straight up and off the sink.

Q: How do I install the new faucet?

A: 1. Apply a bead of plumber’s tape to the threads of the new faucet.
2. Place the faucet on the sink and tighten the screws.
3. Connect the water supply lines to the faucet.
4. Turn on the water supply to the faucet and test it to make sure it is working properly.

Q: What are some common problems with two handle bathtub faucets?

A: Some common problems with two handle bathtub faucets include:

  • Leaking faucets
  • Dripping faucets
  • Faucets that won’t turn off
  • Faucets that are difficult to turn

Q: How can I troubleshoot common problems with two handle bathtub faucets?

A: Here are some tips for troubleshooting common problems with two handle bathtub faucets:

  • If the faucet is leaking, check the O-rings and gaskets for damage. If they are damaged, replace them.
  • If the faucet is dripping, check the washers for damage. If they are damaged, replace them.
  • If the faucet won’t turn off, check the valve stem for damage. If it is damaged, replace it.
  • If the faucet is difficult to turn, apply a lubricant to the stem.

Q: How can I prevent future problems with my two handle bathtub faucet?

A: Here are some tips for preventing future problems with your two handle bathtub faucet:

  • Keep the faucet clean and free of debris.
  • Lubricate the faucet stem regularly.
  • Replace worn or damaged parts as soon as possible.
  • Have the faucet inspected by a plumber every few years.

    In this blog post, we have discussed how to replace a two-handle bathtub faucet. We have covered the steps in detail, from removing the old faucet to installing the new one. We have also provided tips on how to choose the right faucet for your bathtub and how to avoid common mistakes.

We hope that this blog post has been helpful. If you have any questions, please feel free to leave them in the comments section below.

Author Profile

Liana Farrell
Liana Farrell
Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.

Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”

Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.