How To Move A Toilet Over A Few Inches?

How to Move a Toilet Over a Few Iinches

Moving a toilet may seem like a daunting task, but it’s actually a fairly simple process that can be completed in just a few steps. With the right tools and a little bit of elbow grease, you can easily move your toilet over a few inches to accommodate a new vanity or other bathroom fixture.

In this article, we’ll walk you through the steps of moving a toilet, from disconnecting the water supply and sewer line to reinstalling the toilet in its new position. We’ll also provide tips on how to make the process easier and more efficient.

So if you’re ready to move your toilet, read on for all the information you need!

Step	Tools	Instructions
1	Plumber’s putty, adjustable wrench, bucket, rags	Turn off the water supply to the toilet. Place a bucket under the toilet to catch any water that may leak out. Remove the caps from the water supply lines and unscrew the nuts that connect the lines to the toilet.
2	Adjustable wrench, screwdriver, pry bar	Use an adjustable wrench to loosen the nuts that connect the toilet to the floor flange. Insert a pry bar between the toilet and the floor and pry up gently until the nuts are loose.
3	Plumber’s putty, shims	Slide the toilet to the desired location. Place shims under the toilet legs to level it. Apply a bead of plumber’s putty around the base of the toilet.
4	Adjustable wrench	Reattach the water supply lines to the toilet. Tighten the nuts until they are snug. Turn on the water supply to the toilet.
5	Plumber’s putty	Apply a bead of plumber’s putty around the base of the toilet where the tank meets the bowl.

Moving a toilet can be a daunting task, but it is possible to do it yourself with the right tools and instructions. In this guide, we will walk you through the steps of moving a toilet over a few inches. We will provide tips and tricks to make the process easier and more efficient.

Tools and Materials Needed

The following tools and materials are needed to move a toilet:

• Toilet flange wrench
• Adjustable wrench
• Pliers
• Tape measure
• Utility knife
• Penetrating oil
• New wax ring
• New toilet bolts
• Plumber’s putty
• Safety glasses
• Gloves

How to Move a Toilet

To move a toilet, follow these steps:

1. Turn off the water supply to the toilet.
2. Remove the toilet tank lid.
3. Locate the toilet bolts and nuts.
4. Loosen the toilet bolts and nuts with a wrench.
5. Lift the toilet off the floor.
6. Move the toilet to the desired location.
7. Reattach the toilet to the floor with the new bolts and nuts.
8. Turn on the water supply to the toilet.
9. Test the toilet to make sure it is working properly.

Step 1: Turn off the water supply to the toilet.

The first step is to turn off the water supply to the toilet. This can be done by turning the shutoff valve located behind the toilet clockwise. Once the water supply is turned off, you will need to flush the toilet to drain any remaining water.

Step 2: Remove the toilet tank lid.

The next step is to remove the toilet tank lid. This can be done by simply lifting up on the lid and pulling it away from the tank. Once the lid is removed, you will have access to the toilet bolts and nuts.

Step 3: Locate the toilet bolts and nuts.

The toilet bolts and nuts are located on the bottom of the toilet bowl. There are usually two bolts on each side of the toilet. The bolts are held in place by nuts.

Step 4: Loosen the toilet bolts and nuts with a wrench.

The next step is to loosen the toilet bolts and nuts with a wrench. You will need to use an adjustable wrench or a toilet flange wrench to do this. Start by loosening the nuts on one side of the toilet. Once the nuts are loosened, you can use a pliers to hold the nuts in place while you loosen the bolts with the wrench. Repeat this process for the other side of the toilet.

Step 5: Lift the toilet off the floor.

Once the bolts and nuts are loosened, you can lift the toilet off the floor. Be careful not to drop the toilet. If you are having trouble lifting the toilet, you can use a friend to help you.

Step 6: Move the toilet to the desired location.

Once the toilet is lifted off the floor, you can move it to the desired location. Be careful not to drop the toilet. If you are moving the toilet a long distance, you may want to consider using a dolly to help you.

Step 7: Reattach the toilet to the floor with the new bolts and nuts.

Once the toilet is in the desired location, you can reattach it to the floor with the new bolts and nuts. Start by placing a new wax ring on the toilet flange. Then, align the toilet bowl with the flange and lower it down. Once the toilet is in place, you can tighten the bolts and nuts with a wrench.

Step 8: Turn on the water supply to the toilet.

The final step is to turn on the water supply to the toilet. Once the water supply is turned on, you will need to flush the toilet to check for leaks. If there are no leaks, the toilet is properly installed.

Moving a toilet can be a daunting task, but it is possible to do it yourself with the right tools and instructions. By following the steps in this guide, you can move your toilet over a few inches with ease.

Here are some additional tips for moving a toilet:

• Use a piece of cardboard to protect the floor from scratches.
• Place a towel under the toilet to catch any drips.
• Use a level to make sure the toilet is installed level.
• Tighten the bolts and nuts until they are snug, but not too tight.
• Test the toilet to make sure it is working properly.

If you have any questions about moving a toilet, you can consult with a plumber.

How To Move A Toilet Over A Few Inches?

Moving a toilet over a few inches is a relatively simple task that can be completed in about 30 minutes. However, it is important to follow the steps carefully to avoid damaging the toilet or the plumbing.

Tools and Materials

To move a toilet, you will need the following tools and materials:

• Adjustable wrench
• Pliers
• Penetrating oil
• Wax ring
• New toilet bolts
• Silicone sealant
• Rags
• Gloves

Step 1: Turn Off the Water Supply

The first step is to turn off the water supply to the toilet. This can be done by turning the shut-off valve located behind the toilet clockwise. Once the water supply is turned off, flush the toilet to drain any remaining water.

Step 2: Remove the Toilet Seat

The next step is to remove the toilet seat. To do this, locate the two bolts that secure the seat to the toilet bowl. Use a wrench to loosen the bolts and remove the seat.

Step 3: Disconnect the Water Supply Line

The next step is to disconnect the water supply line. The water supply line is located on the back of the toilet, just below the tank. Use a wrench to loosen the nut that connects the water supply line to the toilet. Once the nut is loosened, disconnect the water supply line.

Step 4: Remove the Toilet Bolts

The next step is to remove the toilet bolts. The toilet bolts are located on the bottom of the toilet bowl, just behind the tank. Use a wrench to loosen the bolts and remove them.

Step 5: Lift the Toilet

The next step is to lift the toilet off the floor. To do this, you will need to use a friend or family member to help you. One person will need to hold the tank while the other person lifts the toilet off the floor.

Step 6: Move the Toilet

The next step is to move the toilet to the desired location. Be careful not to drop the toilet, as this could damage the toilet or the floor.

Step 7: Reinstall the Toilet

The next step is to reinstall the toilet. To do this, place the toilet on the floor and align the holes in the toilet bowl with the bolts in the floor. Insert the bolts through the holes and tighten them with a wrench.

Step 8: Connect the Water Supply Line

The next step is to connect the water supply line. To do this, insert the end of the water supply line into the valve on the back of the toilet. Tighten the nut on the water supply line to secure it in place.

Step 9: Reinstall the Toilet Seat

The final step is to reinstall the toilet seat. To do this, align the holes in the toilet seat with the bolts in the toilet bowl. Insert the bolts through the holes and tighten them with a wrench.

Troubleshooting

If the toilet is not draining properly, there may be a clog in the drain line. To clear the clog, you can use a plunger or a drain snake.

If the toilet is leaking, there may be a problem with the wax ring. To fix the leak, you will need to remove the toilet and replace the wax ring.

If the toilet is wobbly, the bolts may not be tight enough. To tighten the bolts, use a wrench to turn them clockwise until they are snug.

Safety Tips

• Wear safety glasses and gloves when working with plumbing fixtures.
• Turn off the water supply to the toilet before you begin work.
• Be careful not to drop any tools or materials into the toilet bowl.
• Do not use excessive force when tightening the bolts.

  How To Move a Toilet Over a Few Inches?

Q: What do I need to do before I start moving my toilet?

A: Before you start moving your toilet, you will need to:

• Turn off the water supply to the toilet.
• Flush the toilet to empty the tank.
• Remove the toilet seat.
• Unbolt the toilet from the floor.

Q: How do I unbolt the toilet from the floor?

A: To unbolt the toilet from the floor, you will need to:

1. Locate the bolts that are holding the toilet to the floor. These bolts are typically located on the back of the toilet, underneath the tank.
2. Use a wrench to loosen the bolts.
3. Once the bolts are loose, you can lift the toilet off of the floor.

Q: How do I move the toilet to its new location?

A: To move the toilet to its new location, you will need to:

1. Place a piece of plywood or cardboard on the ground where you want to move the toilet.
2. Carefully slide the toilet onto the plywood or cardboard.
3. Once the toilet is in place, you can reattach it to the floor.

Q: How do I reattach the toilet to the floor?

A: To reattach the toilet to the floor, you will need to:

1. Place the toilet bolts through the holes in the toilet and the floor.
2. Use a wrench to tighten the bolts.
3. Be sure to tighten the bolts enough so that the toilet is secure, but not so tight that you damage the toilet or the floor.

Q: What do I do if the toilet leaks after I move it?

A: If the toilet leaks after you move it, you will need to:

1. Turn off the water supply to the toilet.
2. Flush the toilet to empty the tank.
3. Remove the toilet seat.
4. Inspect the toilet for leaks.
5. If you find a leak, you will need to tighten the bolts that are holding the toilet to the floor.
6. Once the leak is fixed, you can turn the water supply back on and flush the toilet.

Q: What are some tips for moving a toilet?

Here are some tips for moving a toilet:

• Use a friend or family member to help you move the toilet.
• Lift the toilet with your legs, not your back.
• Be careful not to drop the toilet.
• Move the toilet slowly and carefully.
• If you are not comfortable moving the toilet, you can hire a professional plumber to do it for you.

  Moving a toilet can be a daunting task, but it is possible to do it yourself with a little planning and effort. In this comprehensive guide, we have outlined the steps involved in moving a toilet over a few inches. We have also provided tips and tricks to help you make the process easier and more successful. By following these steps, you can safely and easily move your toilet to its new location.

Here are the key takeaways from this guide:

• Before you begin, make sure you have the necessary tools and materials.
• Turn off the water supply to the toilet and flush the toilet to drain the water from the tank.
• Remove the bolts that hold the toilet to the floor.
• Lift the toilet off the ground and carefully move it to its new location.
• Reattach the toilet to the floor and reconnect the water supply.
• Test the toilet to make sure it is working properly.

By following these steps, you can safely and easily move your toilet to its new location.