How to Remove an RV Toilet the Right Way

AvatarByLiana Farrell Toilet Queries

How to Remove an RV Toilet

RV toilets are a convenient way to stay clean on the road, but they can also be a pain to remove when it’s time to clean them or replace them. In this article, we’ll walk you through the process of removing an RV toilet, step-by-step. We’ll also provide some tips on how to make the job easier and avoid any common mistakes.

So if you’re ready to learn how to remove an RV toilet, read on!

Step Instructions Image
1 Turn off the water supply to the toilet.
2 Disconnect the water line from the toilet.
3 Disconnect the drain line from the toilet.
4 Remove the toilet bolts.
5 Lift the toilet off the floor and set it aside.

How to Remove RV Toilet?

Tools and Materials

  • Safety goggles
  • Gloves
  • Pliers
  • Wrench
  • Screwdriver
  • Penetrating oil
  • Bucket
  • Towels

Steps

1. Disconnect the water supply and sewer lines.

The first step is to disconnect the water supply and sewer lines to the toilet. To do this, you will need to find the water supply line and the sewer line. The water supply line is usually a black hose that connects to the back of the toilet. The sewer line is usually a white or grey pipe that connects to the bottom of the toilet.

Once you have located the water supply and sewer lines, you will need to turn off the water to the toilet. You can usually do this by turning the valve on the water supply line. You will also need to disconnect the sewer line from the toilet. To do this, you will need to unscrew the nut that connects the sewer line to the bottom of the toilet.

2. Remove the toilet bolts.

The next step is to remove the toilet bolts. The toilet bolts are located on the back of the toilet, and they hold the toilet to the floor. To remove the toilet bolts, you will need to use a wrench.

Once you have removed the toilet bolts, you can lift up on the toilet and tilt it forward. This will allow you to access the nuts that connect the toilet to the floor.

3. Remove the nuts that connect the toilet to the floor.

The next step is to remove the nuts that connect the toilet to the floor. To do this, you will need to use a wrench.

Once you have removed the nuts, you can lift up on the toilet and remove it from the floor.

4. Clean the toilet flange.

The toilet flange is the metal ring that the toilet sits on. It is important to clean the toilet flange before installing the new toilet. To do this, you will need to use a brush and some cleaning solution.

5. Install the new toilet.

To install the new toilet, you will need to place it on the toilet flange. Once the toilet is in place, you will need to connect the water supply line and the sewer line. You will also need to tighten the toilet bolts to secure the toilet to the floor.

6. Turn on the water and test the toilet.

Once you have installed the new toilet, you will need to turn on the water and test the toilet. Make sure that the toilet is flushing properly and that there are no leaks.

How To Remove Rv Toilet?

Removing an RV toilet is a relatively simple task, but it is important to follow the proper steps to avoid damaging the toilet or the RV.

1. Gather your tools and materials

Before you begin, gather the following tools and materials:

  • A screwdriver
  • A wrench
  • A bucket
  • A pair of gloves
  • A shop vac
  • A putty knife
  • Plumbing tape
  • Silicone sealant

2. Prepare the toilet

To begin, turn off the water supply to the toilet. This can be done by turning the shut-off valve located under the sink or behind the toilet.

Once the water supply is turned off, flush the toilet to empty the bowl. This will help to loosen any debris that may be stuck in the toilet.

3. Turn off the water supply to the toilet.

The water supply to the toilet is turned off by turning the shut-off valve located under the sink or behind the toilet.

4. Flush the toilet to empty the bowl.

Once the water supply is turned off, flush the toilet to empty the bowl. This will help to loosen any debris that may be stuck in the toilet.

5. Remove the toilet bolts

The toilet bolts are located on the back of the toilet. They are typically held in place with nuts or washers.

To remove the toilet bolts, use a screwdriver to loosen the nuts or washers. Once the nuts or washers are loosened, you can use a wrench to turn the bolts counterclockwise until they come loose.

6. Remove the toilet tank

Once the toilet bolts are removed, you can lift the toilet tank off of the toilet bowl.

To do this, grab the bottom of the toilet tank and lift it up and away from the toilet bowl. Be careful not to spill any water from the tank.

7. Disconnect the water supply line

The water supply line is located on the back of the toilet tank. It is a flexible hose that connects the toilet tank to the water supply.

To disconnect the water supply line, use a pair of pliers to loosen the nut that connects the hose to the toilet tank. Once the nut is loosened, you can pull the hose off of the tank.

8. Disconnect the drain hose

The drain hose is located on the bottom of the toilet tank. It is a flexible hose that connects the toilet tank to the drainpipe.

To disconnect the drain hose, use a pair of pliers to loosen the nut that connects the hose to the toilet tank. Once the nut is loosened, you can pull the hose off of the tank.

9. Remove the toilet bowl

Once the toilet tank is removed, you can lift the toilet bowl off of the floor.

To do this, grab the bottom of the toilet bowl and lift it up and away from the floor. Be careful not to drop the toilet bowl.

10. Clean the toilet flange

The toilet flange is a metal ring that is attached to the floor. It provides a stable base for the toilet bowl.

To clean the toilet flange, use a putty knife to scrape away any old sealant or debris. Be careful not to damage the flange.

11. Apply new sealant

Once the toilet flange is clean, apply a new bead of sealant around the flange. This will help to create a watertight seal between the toilet bowl and the floor.

12. Replace the toilet bowl

Align the toilet bowl with the toilet flange and lower it onto the floor.

Once the toilet bowl is in place, use a wrench to tighten the toilet bolts. Be sure to tighten the bolts evenly so that the toilet bowl is level.

13. Connect the water supply line

Connect the water supply line to the toilet tank.

To do this, insert the end of the hose into the nipple on the back of the toilet tank. Once the hose is inserted, tighten the nut to secure it in place.

14. Connect the drain hose

Connect the drain hose to the toilet tank.

To do this, insert the end of the hose into the nipple on the bottom of the toilet tank. Once the hose is inserted, tighten the nut

How do I remove an RV toilet?

1. Turn off the water supply to the toilet. This is usually located at the back of the toilet, under the tank.
2. Flush the toilet to empty the bowl.
3. Disconnect the water line from the toilet. The water line is usually a 1/2-inch copper or plastic pipe that connects to the bottom of the toilet tank. Use a wrench to loosen the nut that connects the water line to the toilet.
4. Disconnect the drain line from the toilet. The drain line is usually a 3/4-inch PVC pipe that connects to the bottom of the toilet bowl. Use a wrench to loosen the nut that connects the drain line to the toilet.
5. Remove the toilet bolts. There are usually two bolts located on the back of the toilet that secure it to the floor. Use a wrench to loosen the bolts and remove them.
6. Lift up the toilet and carefully remove it from the floor. Be careful not to damage the wax seal that is located between the toilet and the floor.
7. Clean the toilet flange. The toilet flange is the metal ring that is attached to the floor and provides a watertight seal for the toilet. Use a putty knife or scraper to remove any old wax from the flange.
8. Apply new wax to the toilet flange. Use a thin layer of plumber’s putty or toilet wax to create a new watertight seal.
9. Position the new toilet over the toilet flange. Make sure that the toilet is centered over the flange and that the bolts are aligned with the holes in the toilet base.
10. Secure the toilet to the floor. Use the two bolts that you removed earlier to secure the toilet to the floor. Tighten the bolts until the toilet is snug against the floor.
11. Reconnect the water line and drain line to the toilet. Make sure that the connections are tight and that there are no leaks.
12. Turn on the water supply to the toilet. Flush the toilet to check for leaks.

In this blog post, we have discussed how to remove an RV toilet. We have covered the steps involved in the process, as well as some tips and tricks to make the job easier. We hope that this information has been helpful, and that you are now able to remove your RV toilet with confidence.

Here are some key takeaways from this blog post:

  • Before you begin, make sure that you have the proper tools and safety gear.
  • The first step is to disconnect the water and sewer lines.
  • Next, remove the bolts that hold the toilet to the floor.
  • Carefully lift the toilet out of the bowl and set it aside.
  • Clean the area where the toilet was installed and replace the wax ring.
  • Finally, reconnect the water and sewer lines and test the toilet to make sure that it is working properly.

We hope that this blog post has been helpful. If you have any questions, please feel free to leave a comment below.

Author Profile

Liana Farrell
Liana Farrell
Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.

Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”

Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.