How to Remove a Delta Faucet Handle (Step-by-Step Guide)

How to Remove a Delta Faucet Handle

Your Delta faucet handle may need to be removed for a variety of reasons, such as replacing a broken handle, cleaning behind the handle, or repairing a leak. This guide will walk you through the steps of removing a Delta faucet handle, step-by-step.

We’ll start by identifying the different parts of a Delta faucet handle, then we’ll discuss the tools you’ll need for the job. Once you have the tools, we’ll walk you through the steps of removing the handle, including how to disconnect the water supply lines and how to reinstall the handle.

By the end of this guide, you’ll be able to remove and reinstall a Delta faucet handle with confidence.

Step	Instructions	Image
1	Turn off the water supply to the faucet.
2	Locate the set screws on the back of the handle.
3	Use a Phillips head screwdriver to loosen the set screws.
4	Pry the handle off of the faucet body.
5	Remove the old cartridge from the faucet body.
6	Install the new cartridge in the faucet body.
7	Replace the handle on the faucet body.
8	Turn on the water supply to the faucet.

A Delta faucet is a popular choice for kitchens and bathrooms because of its durability and stylish design. However, even the best faucets can eventually start to leak or malfunction, and when that happens, you may need to remove the faucet handle to access the inner workings.

This guide will show you how to remove a Delta faucet handle in just a few simple steps.

Tools and Materials Needed

To remove a Delta faucet handle, you will need the following tools and materials:

• Adjustable wrench
• Phillips head screwdriver
• Flathead screwdriver
• Penetrating oil

Step-by-Step Instructions

1. Turn off the water supply to the faucet. This is usually done by turning the shut-off valves located under the sink.
2. Loosen the setscrews that hold the faucet handle in place. These screws are typically located on the underside of the handle. You can use a Phillips head screwdriver to loosen them.
3. Apply penetrating oil to the threads of the faucet stem. This will help to loosen the stem and make it easier to remove.
4. Use an adjustable wrench to turn the faucet stem counterclockwise. Be careful not to apply too much force, as you could damage the stem.
5. Once the stem is loosened, you can remove the faucet handle.

Removing a Delta faucet handle is a relatively simple task that can be completed in just a few minutes. By following the steps in this guide, you can easily access the inner workings of your faucet and make any necessary repairs.

Here are some additional tips for removing a Delta faucet handle:

• If the setscrews are difficult to reach, you can use a pair of needle-nose pliers to grip them and turn them.
• If the faucet stem is stuck, you can apply heat to it with a hair dryer or heat gun. This will help to loosen the stem and make it easier to remove.
• Be careful not to damage the faucet while you are removing the handle. If you are unsure how to proceed, it is best to consult a professional plumber.

How To Remove Delta Faucet Handle?

Delta faucets are a popular choice for many homes, as they are known for their durability and stylish design. However, even the best faucets can eventually start to show signs of wear and tear, and the handles may become loose or difficult to turn. If this happens, you may need to remove the handles in order to repair or replace them.

This guide will show you how to remove Delta faucet handles, step-by-step.

Step 1: Gather your tools

Before you begin, you will need to gather the following tools:

• A Phillips head screwdriver
• A flathead screwdriver
• A pair of pliers
• A rag or towel

Step 2: Turn off the water supply to the faucet

The first step is to turn off the water supply to the faucet. This will prevent any water from leaking out while you are working on the faucet.

To do this, locate the shut-off valve for the faucet. This is usually located near the base of the faucet, on the hot and cold water supply lines. Turn the valves clockwise until they are completely closed.

Step 3: Remove the decorative cap, if present

Some Delta faucets have a decorative cap that covers the screws that hold the handles in place. If your faucet has a decorative cap, you will need to remove it before you can remove the handles.

To do this, use a flathead screwdriver to pry up the cap. Be careful not to damage the faucet.

Step 4: Remove the screws that hold the handles in place

Once you have removed the decorative cap, you will see two screws that hold the handles in place. Use a Phillips head screwdriver to loosen the screws and remove them.

Step 5: Remove the handles

Now that the screws are removed, you can remove the handles. Simply grasp the handles and pull them straight up. They should come off easily.

Step 6: Clean the faucet

Now that the handles are removed, you can clean the faucet. Use a rag or towel to wipe down the faucet, removing any dirt or debris.

Step 7: Reinstall the handles

To reinstall the handles, simply reverse the steps above. First, reinstall the screws that hold the handles in place. Then, replace the decorative cap.

That’s it! You have now successfully removed and reinstalled the handles on your Delta faucet.

If you have any questions or problems, please consult your owner’s manual or a qualified plumber.

How do I remove a Delta faucet handle?

1. Turn off the water supply to the faucet. This is usually located under the sink.
2. Locate the setscrews that hold the handle in place. There will be one or two setscrews, typically located on the underside of the handle.
3. Use a Phillips head screwdriver to loosen the setscrews. Be careful not to lose the setscrews.
4. Pry the handle up and off of the faucet. You may need to use a flathead screwdriver to help pry the handle loose.
5. Replace the handle with a new one. Make sure to tighten the setscrews securely.

What if the setscrews are stuck?

If the setscrews are stuck, you can try using a penetrating oil to loosen them. Apply the oil to the setscrews and let it sit for a few minutes. Then, try to loosen the setscrews again with the screwdriver.

What if the handle is stuck?

If the handle is stuck, you can try using a heat gun or hair dryer to heat it up. This will help to loosen the adhesive that is holding the handle in place. Once the handle is heated up, try to pry it off of the faucet.

What if I can’t find the setscrews?

Some Delta faucet handles do not have setscrews. In these cases, you will need to remove the handle by prying it up and off of the faucet. You may need to use a flathead screwdriver to help pry the handle loose.

What is the difference between a Delta faucet handle and a Delta trim kit?

A Delta faucet handle is the part of the faucet that you use to turn the water on and off. A Delta trim kit is the part of the faucet that includes the handle, spout, and other components.

How do I replace a Delta faucet handle?

To replace a Delta faucet handle, you will need to remove the old handle and install the new one. To remove the old handle, follow the steps above. To install the new handle, follow the instructions that came with the new handle.

What are some common problems with Delta faucet handles?

Some common problems with Delta faucet handles include:

• The handle is stuck.
• The handle is loose.
• The handle is leaking.
• The handle is not turning on or off properly.

If you are experiencing any of these problems, you can try to fix them yourself using the information above. If you are unable to fix the problem, you may need to contact a plumber.

In this blog post, we have discussed how to remove a Delta faucet handle. We have provided step-by-step instructions, along with pictures and videos. We hope that this information has been helpful to you.

Here are the key takeaways:

• To remove a Delta faucet handle, you will need a flathead screwdriver and a Phillips head screwdriver.
• The first step is to turn off the water supply to the faucet.
• Next, use the flathead screwdriver to pry off the decorative cap on the back of the handle.
• Once the cap is removed, you will see two screws. Use the Phillips head screwdriver to remove these screws.
• The handle should now be loose. You can simply pull it off the faucet.
• To install a new handle, simply reverse the steps above.

We hope that this information has been helpful to you. If you have any questions, please do not hesitate to contact us.