How to Remove a Delta Faucet (Step-by-Step Guide)

AvatarByLiana Farrell Faucet Queries

How to Remove a Delta Faucet

Delta faucets are a popular choice for kitchens and bathrooms, but they can be difficult to remove if you don’t know what you’re doing. In this article, we will walk you through the process of removing a Delta faucet, step-by-step. We’ll also provide some tips and tricks to make the job easier.

So whether you’re replacing your old faucet with a new one or you just need to give it a deep cleaning, read on for all the information you need to know about removing a Delta faucet.

Step Instructions Image
1 Turn off the water supply to the faucet.
2 Remove the decorative cap from the faucet handle.
3 Loosen the setscrews that hold the handle in place.
4 Remove the handle from the faucet.
5 Unscrew the retaining nut that holds the faucet body in place.
6 Pull the faucet body straight out of the sink.

This guide will walk you through the steps of removing a Delta faucet. Delta faucets are a popular choice for kitchens and bathrooms, and they are relatively easy to remove. However, there are a few steps involved, so it is important to follow the instructions carefully.

Gather your tools and materials.

To remove a Delta faucet, you will need the following tools and materials:

  • Adjustable wrench
  • Pliers
  • Penetrating oil
  • Replacement faucet
  • Tape measure
  • Level
  • Pencil

Turn off the water supply.

The first step is to turn off the water supply to the faucet. This will prevent any water from leaking out while you are working on the faucet. To do this, locate the shut-off valves for the hot and cold water lines. These valves are usually located under the sink, near the faucet. Turn the valves clockwise to turn off the water.

Remove the escutcheon plate.

The escutcheon plate is a decorative cover that hides the screws that hold the faucet in place. To remove the escutcheon plate, use a flathead screwdriver to pry it up. Once the escutcheon plate is removed, you will see the screws that hold the faucet in place.

Remove the screws.

Use an adjustable wrench to loosen the screws that hold the faucet in place. Be careful not to drop the screws, as you will need them to reinstall the faucet.

Remove the faucet.

Once the screws are loosened, you can carefully remove the faucet from the sink. Be careful not to damage the sink, as it is made of a soft material.

Disconnect the water lines.

The water lines are connected to the faucet with flexible connectors. To disconnect the water lines, use a pair of pliers to loosen the connectors. Be careful not to damage the connectors, as you will need them to reconnect the water lines to the new faucet.

Remove the old faucet.

Once the water lines are disconnected, you can remove the old faucet. Simply lift it up and out of the sink.

Install the new faucet.

To install the new faucet, simply reverse the steps above. First, install the new faucet in the sink. Then, reconnect the water lines. Finally, replace the escutcheon plate.

Turn on the water supply.

Once the new faucet is installed, you can turn on the water supply. Check for leaks around the faucet. If there are any leaks, tighten the screws until the leaks stop.

Replacing a Delta faucet is a relatively easy task. However, it is important to follow the instructions carefully to avoid damaging the faucet or the sink. If you are not comfortable doing this yourself, you can always hire a professional plumber to do the job for you.

How To Remove A Delta Faucet?

Delta faucets are a popular choice for kitchens and bathrooms, but they can be difficult to remove if you don’t know what you’re doing. In this guide, we will walk you through the process of removing a Delta faucet step-by-step.

Tools and Materials

Before you begin, you will need to gather the following tools and materials:

  • A basin wrench
  • A screwdriver
  • Penetrating oil
  • A bucket
  • Paper towels
  • Gloves

Step 1: Turn Off the Water

The first step is to turn off the water to the faucet. This will prevent any water from spilling out when you remove the faucet. To do this, locate the shut-off valves for the hot and cold water lines. These valves are usually located under the sink. Turn the valves clockwise to turn off the water.

Step 2: Disconnect the Water Lines

Once the water is turned off, you can disconnect the water lines from the faucet. To do this, you will need to loosen the nuts that connect the water lines to the faucet. These nuts are usually located on the bottom of the faucet. Use a basin wrench to loosen the nuts. Be careful not to damage the water lines.

Step 3: Remove the Handle and Stem

Now that the water lines are disconnected, you can remove the handle and stem from the faucet. To do this, you will need to remove the screws that hold the handle in place. These screws are usually located on the front of the faucet. Use a screwdriver to remove the screws. Be careful not to damage the handle.

Once the screws are removed, you can lift the handle off of the faucet. The stem will be attached to the handle. You can remove the stem by unscrewing it from the faucet.

Step 4: Remove the Base Plate

The base plate is the metal plate that covers the holes in the sink where the faucet attaches. To remove the base plate, you will need to loosen the screws that hold it in place. These screws are usually located on the bottom of the sink. Use a screwdriver to loosen the screws. Be careful not to damage the sink.

Once the screws are loosened, you can lift the base plate off of the sink.

Step 5: Remove the Faucet

Now that the handle, stem, and base plate are removed, you can remove the faucet from the sink. To do this, you will need to remove the screws that hold the faucet to the sink. These screws are usually located on the sides of the faucet. Use a screwdriver to remove the screws. Be careful not to damage the sink.

Once the screws are removed, you can lift the faucet off of the sink.

That’s it! You have now successfully removed a Delta faucet. Replacing a Delta faucet is a similar process, but in reverse.

Here are some additional tips for removing a Delta faucet:

  • If the nuts are stuck, you can try using penetrating oil to loosen them.
  • If the screws are stuck, you can try using a lubricant to loosen them.
  • Be careful not to damage the sink or the faucet when you are removing them.

If you have any questions about removing a Delta faucet, please consult a qualified plumber.

How do I remove a Delta faucet?

1. Turn off the water supply to the faucet. This is usually located under the sink.
2. Remove the handles. There will be a small screw on the back of each handle. Use a Phillips head screwdriver to loosen the screw and remove the handle.
3. Remove the escutcheon. This is the decorative cover around the base of the faucet. It is usually held in place by two screws. Use a Phillips head screwdriver to loosen the screws and remove the escutcheon.
4. Unscrew the faucet body from the sink. There will be two bolts on the bottom of the faucet body. Use a wrench to loosen the bolts and remove the faucet body.
5. Disconnect the water lines. There will be two water lines connected to the faucet body. Use a pair of pliers to loosen the nuts and disconnect the water lines.
6. Remove the faucet body from the sink. The faucet body should now be free from the sink. You can now lift it out and replace it with a new one.

What tools do I need to remove a Delta faucet?

You will need the following tools to remove a Delta faucet:

  • A Phillips head screwdriver
  • A wrench
  • A pair of pliers

How long does it take to remove a Delta faucet?

It should take about 15 minutes to remove a Delta faucet.

What if I can’t find the screws to remove the handles?

The screws to remove the handles are usually located on the back of the handles. If you can’t find them, you can try using a small flashlight to look for them. You can also try using a magnet to see if you can find them.

What if I can’t remove the escutcheon?

If you can’t remove the escutcheon, you can try using a putty knife to pry it off. You can also try using a heat gun to soften the adhesive and make it easier to remove.

What if I can’t unscrew the faucet body from the sink?

If you can’t unscrew the faucet body from the sink, you can try using a penetrating oil to loosen the bolts. You can also try using a heat gun to heat up the bolts and make them easier to loosen.

What if I can’t disconnect the water lines?

If you can’t disconnect the water lines, you can try using a pair of pliers to loosen the nuts. You can also try using a heat gun to heat up the nuts and make them easier to loosen.

What if I can’t remove the faucet body from the sink?

If you can’t remove the faucet body from the sink, you may need to call a plumber.

In this blog post, we have discussed how to remove a Delta faucet. We have covered the steps in detail, with images to help you visualize the process. We have also provided tips on how to avoid common mistakes.

We hope that this blog post has been helpful. If you have any questions, please leave them in the comments section below.

Author Profile

Liana Farrell
Liana Farrell
Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.

Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”

Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.