How Do You Move A Toilet?

How to Move a Toilet

Moving a toilet is a daunting task, but it’s one that many homeowners will have to face at some point. Whether you’re remodeling your bathroom, replacing an old toilet, or simply relocating your toilet to a new location, it’s important to know how to do it properly.

In this article, we’ll walk you through the steps of moving a toilet, from disconnecting the water supply and sewer line to reattaching the toilet to the floor. We’ll also provide tips on how to make the process easier and more efficient.

So if you’re ready to learn how to move a toilet, read on!

Step	Instructions	Image
1	Turn off the water supply to the toilet.
2	Disconnect the water supply line from the toilet.
3	Disconnect the toilet from the floor flange.
4	Slide the toilet out from under the vanity.
5	Move the toilet to its new location.
6	Reattach the toilet to the floor flange.
7	Reattach the water supply line to the toilet.
8	Turn on the water supply to the toilet.

How Do You Move a Toilet?

Moving a toilet is a relatively simple task, but it does require some planning and preparation. This guide will walk you through the process of moving a toilet, from disconnecting it from the sewer line to reinstalling it in its new location.

Gather the Tools and Materials You Will Need

Before you begin, gather the following tools and materials:

• Toilet plunger
• Adjustable wrench
• Pliers
• Tape measure
• Utility knife
• Penetrating oil
• Gloves
• Safety glasses
• Work clothes

Disconnect the Toilet from the Sewer Line

The first step is to disconnect the toilet from the sewer line. To do this, you will need to:

1. Turn off the water supply to the toilet.
2. Flush the toilet to drain the water from the tank.
3. Locate the bolts that connect the toilet to the floor flange.
4. Loosen the bolts with an adjustable wrench.
5. Use a plunger to break the seal between the toilet and the floor flange.
6. Pull the toilet away from the wall.

Remove the Toilet from the Floor

Once the toilet is disconnected from the sewer line, you can remove it from the floor. To do this, you will need to:

1. Place a bucket under the toilet to catch any residual water.
2. Use a utility knife to cut the wax ring around the base of the toilet.
3. Lift the toilet up and away from the floor.
4. Carefully carry the toilet to its new location.

Install the New Toilet

To install the new toilet, you will need to:

1. Place the new toilet on the floor in the desired location.
2. Apply a new wax ring around the base of the toilet.
3. Lower the toilet onto the wax ring.
4. Tighten the bolts that connect the toilet to the floor flange.
5. Turn on the water supply to the toilet.
6. Flush the toilet to test the seal.

Tips for Moving a Toilet

Here are a few tips for moving a toilet:

• Wear gloves to protect your hands.
• Use safety glasses to protect your eyes.
• Work in a well-ventilated area.
• Be careful not to drop the toilet.
• If you are not comfortable moving the toilet yourself, hire a professional plumber.

Moving a toilet is a relatively simple task, but it does require some planning and preparation. By following the steps in this guide, you can safely and successfully move your toilet to its new location.

How Do You Move A Toilet?

Moving a toilet is a relatively simple task, but it does require some careful planning and execution. By following these steps, you can safely and successfully move your toilet to its new location.

1. Prepare the Toilet for Removal

Before you can move the toilet, you need to first prepare it for removal. This involves disconnecting the water supply and sewer line, and removing the toilet seat.

To disconnect the water supply, turn off the water valve located at the back of the toilet. Then, use a wrench to loosen the nuts that connect the water supply line to the toilet. Once the nuts are loosened, you can disconnect the water supply line and remove it from the toilet.

To disconnect the sewer line, use a wrench to loosen the nuts that connect the sewer line to the toilet. Once the nuts are loosened, you can disconnect the sewer line and remove it from the toilet.

To remove the toilet seat, simply lift up on the front of the seat and pull it away from the toilet.

2. Remove the Toilet from the Floor Flange

Once the toilet is prepared for removal, you can now remove it from the floor flange. To do this, you will need to place a bucket under the toilet to catch any water that may leak out. Then, insert a pry bar under the toilet and pry it up slightly. Use a utility knife to cut the wax ring that seals the toilet to the floor flange. Finally, carefully lower the toilet to the ground.

3. Move the Toilet to its New Location

Once the toilet is removed from its old location, you can now move it to its new location. Place the toilet in the desired location and make sure that it is level. Then, connect the toilet to the sewer line and tighten the nuts that connect the sewer line to the toilet. Next, connect the water supply line to the toilet and tighten the nuts that connect the water supply line to the toilet. Finally, turn on the water supply to the toilet and flush the toilet to check for leaks.

4. Secure the Toilet to the Floor

Once the toilet is connected to the sewer line and water supply line, you can now secure it to the floor. To do this, you will need to use four bolts and washers. Insert the bolts through the holes in the toilet flange and into the holes in the toilet base. Then, tighten the nuts on the bolts to secure the toilet to the floor.

Moving a toilet is a relatively simple task, but it does require some careful planning and execution. By following these steps, you can safely and successfully move your toilet to its new location.

Here are some additional tips for moving a toilet:

• If you are unable to remove the toilet seat, you can simply cut it off with a hacksaw.
• If you are unable to disconnect the water supply line, you can simply turn off the water valve and drain the water from the toilet tank.
• If you are unable to disconnect the sewer line, you can simply cut the sewer line and install a new one.
• Be sure to wear gloves and eye protection when moving a toilet.
• If you are unsure about how to move a toilet, it is best to hire a professional plumber.

  How do I move a toilet?

Answer: Moving a toilet can be a daunting task, but it is possible with the right tools and instructions. Here is a step-by-step guide on how to move a toilet:

1. Turn off the water supply to the toilet. This is usually located under the sink or behind the toilet.
2. Flush the toilet to drain the water from the tank.
3. Disconnect the water supply line to the toilet. This is usually a 1/2-inch copper or plastic pipe that connects to the bottom of the toilet tank. Use a wrench to loosen the nut that connects the pipe to the toilet.
4. Disconnect the drain line from the toilet. This is usually a 3/8-inch PVC pipe that connects to the bottom of the toilet bowl. Use a wrench to loosen the nut that connects the pipe to the toilet.
5. Place a bucket under the toilet to catch any water that may leak out.
6. Use a plunger to loosen the wax ring that seals the toilet to the floor. Work the plunger around the base of the toilet until the wax ring starts to come loose.
7. Slide a piece of wood or cardboard under the toilet to help support it.
8. Carefully lift the toilet off the floor and set it on the bucket.
9. Move the toilet to its new location.
10. Place the toilet on the floor and reconnect the water supply line and drain line.
11. Reinstall the wax ring.
12. Turn on the water supply to the toilet.
13. Flush the toilet to test the seal.

What tools do I need to move a toilet?

You will need the following tools to move a toilet:

• A wrench
• A plunger
• A bucket
• A piece of wood or cardboard
• A new wax ring

How much does it cost to move a toilet?

The cost of moving a toilet will vary depending on the size and weight of the toilet, the distance it needs to be moved, and the cost of labor. The average cost to move a toilet is between $100 and $200.

Can I move a toilet myself?

Yes, you can move a toilet yourself if you have the right tools and instructions. However, it is important to be careful when moving a toilet as it is a heavy object and can be dangerous if not handled properly. If you are not comfortable moving a toilet yourself, you can hire a professional to do the job for you.

What is the best way to move a toilet?

The best way to move a toilet is to use a dolly or hand truck. This will help to evenly distribute the weight of the toilet and make it easier to move. You can also use a piece of wood or cardboard to help support the toilet.

What should I do if the toilet is stuck to the floor?

If the toilet is stuck to the floor, you can try using a plunger to loosen the wax ring. Work the plunger around the base of the toilet until the wax ring starts to come loose. You can also try using a heat gun to melt the wax ring. Hold the heat gun about 6 inches away from the wax ring and move it in a circular motion until the wax ring starts to melt. Be careful not to burn yourself.

What if I damage the toilet when I move it?

If you damage the toilet when you move it, you will need to replace the toilet. You can purchase a new toilet from a home improvement store.

How long does it take to move a toilet?

It typically takes about 30 minutes to move a toilet. However, the time it takes will vary depending on the size and weight of the toilet, the distance it needs to be moved, and the condition of the floor.

Moving a toilet is a difficult task, but it can be done with the right tools and instructions. In this article, we have outlined the steps involved in moving a toilet, from disconnecting the water supply and sewer line to reinstalling the toilet in its new location. We have also provided tips for making the process easier and more efficient.

By following these steps, you can safely and successfully move your toilet to a new location. However, if you are unsure about any of the steps, or if you have any concerns, it is always best to consult with a professional plumber.

Here are some key takeaways from this article:

• Before you begin, make sure you have the right tools and materials.
• Disconnect the water supply and sewer line before lifting the toilet.
• Use a lifting device to move the toilet.
• Reinstall the toilet in its new location and reconnect the water supply and sewer line.
• Test the toilet to make sure it is working properly.

By following these steps, you can safely and successfully move your toilet to a new location.