How To Pull A Toilet?

AvatarByLiana Farrell Toilet Queries

How to Pull a Toilet

A clogged toilet can be a major inconvenience, but it’s a problem that most homeowners can fix themselves. By following a few simple steps, you can remove the toilet and clear the clog in no time.

In this article, we’ll walk you through the process of pulling a toilet, from start to finish. We’ll provide detailed instructions and tips, so you can be confident that you’re doing the job correctly.

So if you’re ready to get started, let’s get to work!

Step Instructions Images
1 Turn off the water supply to the toilet.
2 Remove the toilet seat.
3 Locate the bolts that hold the toilet to the floor.
4 Use a wrench to loosen the bolts.
5 Gently rock the toilet back and forth until it is free from the floor.
6 Remove the toilet from the bathroom.

How to Pull a Toilet?

Tools and Materials Needed

To remove a toilet, you will need the following tools and materials:

  • A plunger
  • A hacksaw
  • A screwdriver
  • A putty knife
  • A bucket
  • A pair of gloves
  • A pair of safety goggles
  • A new wax ring
  • A new toilet flange
  • Plumbing putty
  • Silicone sealant

Steps in Removing a Toilet

1. Turn off the water supply to the toilet. This is usually located behind the toilet, near the floor.
2. Flush the toilet to drain any remaining water.
3. Remove the caps from the water supply valves on either side of the toilet.
4. Use a wrench to loosen the nuts on the water supply valves.
5. Pull the water supply lines out of the toilet.
6. Use a screwdriver to remove the nuts that hold the toilet to the floor.
7. Pull the toilet up and away from the floor.
8. Inspect the toilet flange for damage. If the flange is damaged, you will need to replace it.
9. Apply a bead of plumber’s putty around the new wax ring.
10. Place the new wax ring on the toilet flange.
11. Center the toilet over the flange and lower it down.
12. Tighten the nuts on the toilet bolts until the toilet is secure.
13. Connect the water supply lines to the toilet.
14. Turn on the water supply to the toilet.
15. Flush the toilet to check for leaks.

Removing a toilet is a relatively simple task, but it is important to follow the steps carefully to avoid damaging the toilet or the plumbing. If you are not comfortable doing this yourself, you can always hire a plumber to do the job for you.

Troubleshooting

If you’re having trouble pulling your toilet, there are a few things you can check.

  • Make sure the water is turned off. Before you do anything else, turn off the water supply to the toilet. This will prevent any water from spilling out when you remove the toilet.
  • Locate the bolts that hold the toilet to the floor. There are usually two bolts, one on each side of the toilet. These bolts are usually located behind the toilet tank.
  • Use a wrench to loosen the bolts. Once you’ve located the bolts, use a wrench to loosen them. Be careful not to overtighten the bolts, as this could damage the toilet.
  • Pull the toilet up and away from the floor. Once the bolts are loose, you can pull the toilet up and away from the floor. Be careful not to drop the toilet, as this could damage it.
  • Inspect the toilet for damage. Once the toilet is removed, inspect it for damage. Look for cracks in the porcelain, broken bolts, or other damage. If you find any damage, you’ll need to replace the toilet before reinstalling it.

Reinstalling a Toilet

Once you’ve removed the old toilet, you can reinstall a new one. Here are the steps involved:

1. Place the new toilet in the correct position. The toilet should be centered on the drain and the bolts should be aligned with the holes in the floor.
2. Insert the bolts through the holes in the floor and into the toilet. Tighten the bolts until they’re snug, but not too tight.
3. Connect the water supply line to the toilet. The water supply line should be connected to the valve on the back of the toilet.
4. Turn on the water supply to the toilet. This will fill the toilet tank with water.
5. Flush the toilet to test the installation. The toilet should flush properly without any leaks.

If you have any trouble reinstalling the toilet, you can always call a plumber for help.

Pulling a toilet is a relatively simple task, but it’s important to follow the steps carefully to avoid damaging the toilet. If you’re having trouble, you can always call a plumber for help.

How do I know if I need to pull my toilet?

There are a few signs that you may need to pull your toilet, including:

  • The toilet is leaking from the bottom.
  • The toilet is making a gurgling or bubbling noise.
  • The toilet is not flushing properly.
  • The toilet is constantly running.

If you see any of these signs, it’s a good idea to have your toilet pulled and inspected by a plumber.

What tools do I need to pull a toilet?

You will need the following tools to pull a toilet:

  • A plunger
  • A hacksaw
  • A screwdriver
  • A bucket
  • A pair of gloves
  • A shop vac

How do I pull a toilet?

1. Turn off the water supply to the toilet.
2. Flush the toilet to empty the bowl.
3. Remove the toilet seat.
4. Locate the bolts that hold the toilet to the floor.
5. Use a hacksaw to cut the bolts.
6. Use a screwdriver to pry the toilet away from the floor.
7. Use a bucket to catch any water that leaks out of the toilet.
8. Use a shop vac to clean up any debris.
9. Reinstall the toilet seat.
10. Turn on the water supply to the toilet.

What do I do if the toilet is stuck?

If the toilet is stuck, you can try the following:

  • Apply a lubricant to the bolts.
  • Use a pry bar to loosen the toilet.
  • Use a hammer to tap on the toilet.
  • If all else fails, you may need to call a plumber.

What do I do if I break the toilet?

If you break the toilet, you will need to replace it. You can purchase a new toilet from a hardware store or home improvement store.

How much does it cost to pull a toilet?

The cost of pulling a toilet varies depending on the location, the type of toilet, and the amount of work involved. The average cost of pulling a toilet is between $100 and $200.

Can I pull a toilet myself?

Yes, you can pull a toilet yourself. However, it is important to be careful and follow the instructions carefully. If you are not comfortable doing this yourself, you can hire a plumber to do it for you.

pulling a toilet is a relatively simple task that can be completed in a few steps. However, it is important to follow the proper steps to avoid damaging the toilet or your plumbing. By following the steps outlined in this article, you can safely and successfully remove your toilet and replace it with a new one.

Here are some key takeaways from this article:

  • Before you begin, make sure you have the necessary tools and materials.
  • Turn off the water supply to the toilet and flush the toilet to drain the water.
  • Remove the nuts that hold the toilet to the floor.
  • Lift the toilet off of the wax ring and carefully lower it to the ground.
  • Clean the toilet flange and apply a new wax ring.
  • Place the toilet back on the flange and tighten the nuts.
  • Turn on the water supply to the toilet and flush to test for leaks.

By following these steps, you can safely and successfully remove your toilet and replace it with a new one.

Author Profile

Liana Farrell
Liana Farrell
Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.

Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”

Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.