How to Replace a Moen Faucet Cartridge | Step-by-Step Guide

AvatarByLiana Farrell Faucet Queries

Moen Faucet Cartridge Replacement: A Step-by-Step Guide

Your Moen faucet is one of the most important fixtures in your home. It’s used for everything from washing your hands to brushing your teeth. But what happens when the faucet starts to leak or drip? If you’re not a plumber, you might be tempted to call for a professional. But replacing a Moen faucet cartridge is actually a relatively simple task that you can do yourself.

In this guide, we’ll walk you through the process of replacing a Moen faucet cartridge step-by-step. We’ll provide detailed instructions and images, so you can be confident that you’re doing the job correctly. So if your Moen faucet is acting up, read on to learn how to fix it!

Step Tools Instructions
1. Turn off the water supply to the faucet. – Adjustable wrench – Pliers
2. Remove the old cartridge. – Flathead screwdriver – Penetrating oil
3. Install the new cartridge. – New cartridge – Teflon tape
4. Turn on the water supply to the faucet.

Moen faucets are a popular choice for many homeowners because they are known for their durability and quality. However, even the best faucets can eventually wear out and need to be replaced. If you are experiencing problems with your Moen faucet, such as leaking or dripping, it may be time to replace the cartridge. Replacing a Moen faucet cartridge is a relatively simple task that can be completed in about 30 minutes.

In this guide, we will walk you through the steps of how to install a Moen faucet cartridge. We will provide detailed instructions and images to help you along the way.

Gather the necessary tools and materials

Before you begin, you will need to gather the following tools and materials:

  • Tape measure
  • Pliers
  • Screwdriver
  • Penetrating oil
  • New Moen faucet cartridge
  • Replacement washers (if necessary)

Turn off the water supply to the faucet

The first step is to turn off the water supply to the faucet. This will prevent any water from spilling out when you remove the old cartridge.

To turn off the water supply, locate the shut-off valve for the faucet. It is usually located under the sink. Turn the valve clockwise to turn off the water supply.

Remove the old cartridge

Now that the water supply is turned off, you can begin to remove the old cartridge.

1. First, use the pliers to loosen the retaining clip on the cartridge. The retaining clip is located on the bottom of the cartridge.
2. Once the retaining clip is loose, you can remove the old cartridge by unscrewing it counterclockwise.
3. Be careful not to drop the old cartridge, as it may contain small parts.

Install the new cartridge

Now that the old cartridge is removed, you can install the new one.

1. First, apply a small amount of penetrating oil to the threads of the new cartridge. This will help to make it easier to screw in.
2. Next, insert the new cartridge into the faucet body.
3. Once the cartridge is inserted, tighten it clockwise until it is snug.

Replace the retaining clip

Now that the new cartridge is installed, you can replace the retaining clip.

1. First, align the retaining clip with the slot in the cartridge.
2. Then, use the pliers to snap the retaining clip into place.

Turn on the water supply and test the faucet

Now that the new cartridge is installed, you can turn on the water supply and test the faucet.

1. Turn the shut-off valve clockwise to turn on the water supply.
2. Check for leaks around the faucet.
3. If there are no leaks, the new cartridge has been successfully installed.

Replacing a Moen faucet cartridge is a relatively simple task that can be completed in about 30 minutes. By following the steps in this guide, you can easily replace the cartridge and get your faucet back in working order.

Here are some additional tips for replacing a Moen faucet cartridge:

  • If the old cartridge is stuck, you can try using a penetrating oil to loosen it.
  • Be careful not to drop the old cartridge, as it may contain small parts.
  • Make sure to tighten the new cartridge securely, but do not overtighten it.
  • Test the faucet to make sure there are no leaks.

How To Install A Moen Faucet Cartridge?

Tools and Materials

To install a Moen faucet cartridge, you will need the following tools and materials:

  • A Phillips head screwdriver
  • A flathead screwdriver
  • A faucet wrench
  • A new Moen faucet cartridge
  • Plumbing tape

Step 1: Turn off the water supply

Before you can begin replacing the faucet cartridge, you will need to turn off the water supply to the faucet. This is usually done by turning a shut-off valve located under the sink. Once the water supply is turned off, you can begin the next step.

Step 2: Remove the old faucet handle

The next step is to remove the old faucet handle. To do this, you will need to locate the screws that hold the handle in place. These screws are usually located on the front of the faucet, near the base of the handle. Once you have located the screws, use a Phillips head screwdriver to loosen them and remove the handle.

Step 3: Remove the old faucet cartridge

With the old faucet handle removed, you can now remove the old faucet cartridge. To do this, you will need to locate the retaining clip that holds the cartridge in place. This clip is usually located on the bottom of the faucet body. Once you have located the retaining clip, use a flathead screwdriver to pry it open. This will allow you to remove the old cartridge.

Step 4: Install the new faucet cartridge

Now that the old cartridge has been removed, you can install the new cartridge. To do this, simply insert the new cartridge into the faucet body. Make sure that the cartridge is seated properly.

Step 5: Replace the retaining clip

Once the new cartridge is installed, you can replace the retaining clip. To do this, simply snap the clip back into place.

Step 6: Replace the faucet handle

With the retaining clip in place, you can now replace the faucet handle. To do this, simply reverse the steps you took to remove the handle.

Step 7: Turn on the water supply

The final step is to turn on the water supply to the faucet. Once the water supply is turned on, you should check for leaks. If you do not see any leaks, the faucet has been successfully replaced.

Replacing a Moen faucet cartridge is a relatively simple task that can be completed in just a few minutes. By following the steps in this guide, you can easily replace your old cartridge and keep your faucet in working order.

Here are some additional tips for replacing a Moen faucet cartridge:

  • Make sure to purchase a new cartridge that is compatible with your faucet.
  • Be careful not to damage the faucet body or the new cartridge when you are removing or installing the cartridge.
  • If you are not comfortable working on your own plumbing, you can always call a professional plumber to help you.

    How to Install a Moen Faucet Cartridge?

Q: What tools do I need?

A: You will need a Phillips head screwdriver, a flathead screwdriver, and a wrench.

Q: What is the first step?

A: Turn off the water supply to the faucet. You can usually find the shut-off valves under the sink.

Q: How do I remove the old cartridge?

A: There are two different types of Moen faucet cartridges: compression and ceramic. Compression cartridges are held in place with a set screw, while ceramic cartridges are held in place with a retaining clip.

To remove a compression cartridge:

1. Use the Phillips head screwdriver to remove the set screw.
2. Grip the cartridge with the flathead screwdriver and twist it counterclockwise until it comes loose.

To remove a ceramic cartridge:

1. Use the flathead screwdriver to pry up the retaining clip.
2. Grip the cartridge with the Phillips head screwdriver and twist it counterclockwise until it comes loose.

Q: How do I install the new cartridge?

A: To install a compression cartridge:

1. Insert the new cartridge into the faucet body.
2. Use the Phillips head screwdriver to tighten the set screw.

To install a ceramic cartridge:

1. Insert the new cartridge into the faucet body.
2. Use the flathead screwdriver to snap the retaining clip into place.

Q: How do I turn the water back on?

A: Turn the shut-off valves back on.

Q: What if I have trouble installing the cartridge?

A: If you are having trouble installing the cartridge, you can contact Moen customer service for help.

In this blog post, we have discussed how to install a Moen faucet cartridge. We have covered the steps in detail, with images and videos to help you along the way. We hope that this information has been helpful, and that you are now able to successfully install a Moen faucet cartridge in your home.

Here are the key takeaways from this blog post:

  • Before you begin, make sure you have the right tools and materials.
  • Turn off the water supply to the faucet before you start.
  • Remove the old cartridge by unscrewing the retaining nut.
  • Clean the faucet body and seat.
  • Install the new cartridge by inserting it into the faucet body and tightening the retaining nut.
  • Turn on the water supply and test the faucet.

We hope that you found this blog post helpful. If you have any questions, please leave them in the comments below. We would be happy to help you out.

Author Profile

Liana Farrell
Liana Farrell
Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.

Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”

Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.