How to Install a Freestanding Tub Faucet on Concrete: A Step-by-Step Guide

AvatarByLiana Farrell Faucet Queries

How to Install a Freestanding Tub Faucet on Concrete

A freestanding tub faucet is a beautiful and stylish way to add a touch of luxury to your bathroom. But installing one can be a bit tricky, especially if you’re not sure what you’re doing.

In this article, we’ll walk you through the process of installing a freestanding tub faucet on concrete, step by step. We’ll cover everything from choosing the right faucet to preparing the concrete surface. By the end of this article, you’ll be able to install your own freestanding tub faucet with confidence.

So what are you waiting for? Let’s get started!

| Step | Task | Tools |
|—|—|—|
| 1 | Prepare the concrete | Clean the concrete surface with a wire brush and remove any loose debris. | Wire brush, bucket of water |
| 2 | Mark the location of the faucet | Use a level to mark the location of the faucet on the concrete. | Level, pencil |
| 3 | Drill the holes | Drill holes in the concrete for the faucet fittings. | Drill, drill bits |
| 4 | Insert the fittings | Insert the fittings into the holes in the concrete. | Pipe wrench, plumber’s putty |
| 5 | Connect the faucet | Connect the faucet to the fittings. | Faucet wrench, plumber’s tape |
| 6 | Test the faucet | Turn on the water supply to the faucet and test it for leaks. | |

Tools and Materials Needed

In order to install a freestanding tub faucet on concrete, you will need the following tools and materials:

  • A tape measure
  • A level
  • A drill
  • A hammer
  • A chisel
  • A putty knife
  • A caulking gun
  • Concrete sealant
  • A freestanding tub faucet
  • A mounting kit for the faucet
  • A drain assembly for the faucet
  • Plumber’s putty
  • Pipe dope
  • A supply line for the faucet
  • A drain line for the faucet

Preparing the Concrete

Before you can install the freestanding tub faucet, you will need to prepare the concrete. This involves:

1. Cleaning the concrete. Make sure that the concrete is clean and free of any debris or dust.
2. Marking the location of the faucet. Use a tape measure and a level to mark the location of the faucet on the concrete.
3. Drilling the holes. Use a drill to drill holes in the concrete for the faucet’s mounting screws.
4. Chiselling out the holes. Use a chisel to chisel out the holes so that they are slightly larger than the mounting screws.
5. Applying sealant. Apply a sealant around the holes to prevent water from seeping into the concrete.

Installing the Faucet

Once the concrete is prepared, you can install the freestanding tub faucet. This involves:

1. Attaching the mounting kit to the faucet. Follow the manufacturer’s instructions to attach the mounting kit to the faucet.
2. Installing the faucet on the concrete. Insert the mounting screws into the holes in the concrete and tighten them until the faucet is secure.
3. Connecting the supply line and drain line. Connect the supply line and drain line to the faucet according to the manufacturer’s instructions.
4. Testing the faucet. Turn on the water supply to the faucet and test it to make sure that it is working properly.

Installing a freestanding tub faucet on concrete is a relatively simple process, but it is important to follow the steps carefully to ensure that the faucet is installed correctly. By following these instructions, you can install a freestanding tub faucet on concrete that will provide you with years of enjoyment.

Preparing the Concrete

Before you can install a freestanding tub faucet on concrete, you need to prepare the surface. This involves cleaning the concrete and making sure it is level.

To clean the concrete, use a degreaser and a scrub brush. Be sure to remove all dirt, grease, and debris.

Once the concrete is clean, you need to make sure it is level. You can do this by using a level. If the concrete is not level, you will need to level it before you can install the faucet.

Installing the Faucet Base

The next step is to install the faucet base. The faucet base is the part of the faucet that attaches to the concrete.

To install the faucet base, you will need to use a drill and concrete anchors.

First, drill holes in the concrete where you want to attach the faucet base. Then, insert the concrete anchors into the holes.

Once the concrete anchors are in place, you can attach the faucet base to the concrete. Use the screws that came with the faucet base to secure it in place.

Installing the Faucet

Now that the faucet base is installed, you can install the faucet itself.

To install the faucet, you will need to connect the faucet to the water supply lines. You will also need to connect the faucet to the drain line.

To connect the faucet to the water supply lines, you will need to use PEX tubing. PEX tubing is a flexible tubing that is used for water supply lines.

To connect the faucet to the drain line, you will need to use a drain tailpiece. A drain tailpiece is a short piece of pipe that connects the faucet to the drain.

Once the faucet is connected to the water supply lines and the drain line, you can turn on the water and test the faucet.

Testing the Faucet

Once you have turned on the water, you need to test the faucet.

To test the faucet, turn on the hot and cold water and make sure that the faucet is working properly.

You should also check the faucet for leaks. If there are any leaks, you will need to tighten the connections.

Once you have tested the faucet and made sure that it is working properly, you can enjoy your new freestanding tub faucet.

How do I install a freestanding tub faucet on concrete?

1. Measure the distance between the two holes in the concrete where the faucet will be installed. This distance should be the same as the distance between the two mounting holes on the faucet.
2. Drill two holes in the concrete that are the same size as the mounting holes on the faucet. The holes should be deep enough to accommodate the faucet’s mounting bolts.
3. Insert the mounting bolts through the holes in the concrete and into the faucet. Tighten the bolts until the faucet is secure.
4. Connect the water supply lines to the faucet. Make sure that the water supply lines are the correct size for the faucet.
5. Turn on the water supply to the faucet and check for leaks. If there are any leaks, tighten the connections until the leaks stop.

What is the best way to seal around a freestanding tub faucet?

There are a few different ways to seal around a freestanding tub faucet. You can use:

  • Silicone sealant: This is a good option for sealing around a faucet that is not going to be moved very often.
  • Acrylic latex caulk: This is a good option for sealing around a faucet that is going to be moved frequently.
  • Epoxy putty: This is a good option for sealing around a faucet that is going to be exposed to a lot of water.

How do I remove a freestanding tub faucet?

To remove a freestanding tub faucet, you will need:

  • A wrench
  • A putty knife
  • A utility knife
  • A bucket
  • A rag

1. Turn off the water supply to the faucet.
2. Remove the faucet handles.
3. Loosen the mounting bolts that hold the faucet in place.
4. Use a putty knife to carefully pry the faucet away from the concrete.
5. Use a utility knife to cut any sealant that is still attached to the concrete.
6. Clean the area around the faucet with a rag.

What are some common problems with freestanding tub faucets?

Some common problems with freestanding tub faucets include:

  • Leaks: Faucets can leak at the connection points between the faucet and the water supply lines, or at the base of the faucet where it meets the sink.
  • Clogged drains: The drain on a freestanding tub faucet can become clogged with hair, soap scum, and other debris.
  • Broken parts: The faucet can break if it is dropped or if the water supply lines are not properly tightened.

How can I prevent problems with my freestanding tub faucet?

You can prevent problems with your freestanding tub faucet by:

  • Tightening the water supply lines securely.
  • Keeping the drain clean.
  • Replacing worn or damaged parts as soon as possible.
  • Installing a water softener to prevent hard water buildup.

What are some tips for choosing a freestanding tub faucet?

When choosing a freestanding tub faucet, you should consider:

  • The style of your bathroom. The faucet should complement the overall style of your bathroom.
  • The size of your tub. The faucet should be the right size for your tub.
  • Your budget. There are freestanding tub faucets available in a variety of price ranges.
  • The features that you want. Some faucets have features such as touchless operation or built-in water filters.

Where can I buy a freestanding tub faucet?

Freestanding tub faucets are available at a variety of retailers, including home improvement stores, plumbing supply stores, and online retailers.

Installing a freestanding tub faucet on concrete is a relatively straightforward process, but there are a few important steps to follow in order to ensure that the faucet is installed correctly and securely. By following the steps outlined in this guide, you can easily install a freestanding tub faucet on your own.

Here are the key takeaways from this guide:

  • Measure the location of the faucet carefully. The faucet should be centered on the tub and at least 12 inches above the top of the tub rim.
  • Drill the holes for the faucet. The holes should be 1 inch in diameter and located 1 inch from the edge of the concrete.
  • Install the faucet base. The base should be level and secure.
  • Attach the faucet to the base. The faucet should be tight and secure.
  • Turn on the water and test the faucet. The faucet should be working properly.

By following these steps, you can easily install a freestanding tub faucet on your own. With a little time and effort, you can enjoy the benefits of a beautiful and functional freestanding tub faucet.

Author Profile

Liana Farrell
Liana Farrell
Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.

Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”

Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.