How to Hide Pex Pipes for a Clean, Finished Look

AvatarByLiana Farrell Toilet Queries

How to Hide Pex Toilet Supply Line

Your toilet supply line is an important part of your plumbing system, but it’s also one of the most unsightly. If you’re looking for a way to improve the look of your bathroom, hiding your pex toilet supply line is a great option.

There are a few different ways to hide a pex toilet supply line, and the best method for you will depend on your specific bathroom layout. In this article, we’ll discuss the different methods for hiding a pex toilet supply line, and we’ll provide step-by-step instructions on how to complete each project.

We’ll also discuss the pros and cons of each method, so you can make an informed decision about which one is right for you. So if you’re ready to learn how to hide your pex toilet supply line, read on!

“`html

Step Instructions Image
1 Turn off the water supply to the toilet.
2 Locate the pex toilet supply line. It is usually a white or clear plastic line that connects to the bottom of the toilet tank.
3 Cut the pex toilet supply line with a utility knife.
4 Slide a piece of pex tubing over the cut end of the pex toilet supply line.
5 Apply a bead of silicone sealant around the connection between the pex tubing and the pex toilet supply line.
6 Allow the silicone sealant to dry completely.
7 Turn the water supply to the toilet back on.

“`

How to Hide Pex Toilet Supply Line?

Pex toilet supply lines are a common sight in many homes, but they can also be a eyesore. If you’re looking to hide your pex toilet supply line, there are a few different ways you can do it.

Tools and Materials Needed

To hide your pex toilet supply line, you will need the following tools and materials:

  • A hacksaw
  • A utility knife
  • A screwdriver
  • A drill
  • A 1/2-inch PVC pipe
  • A 1/2-inch PVC coupling
  • A 1/2-inch PVC tee
  • A 1/2-inch PVC cap
  • A 1/2-inch PVC union
  • A 1/2-inch PVC elbow
  • A 1/2-inch PVC pipe insulation
  • A sealant
  • A rag

Steps to Hide Pex Toilet Supply Line

1. Turn off the water supply to the toilet. To do this, locate the shut-off valve for the toilet and turn it clockwise until it is fully closed.
2. Disconnect the pex toilet supply line from the toilet. To do this, locate the pex connector on the bottom of the toilet tank and unscrew it by hand.
3. Cut the pex toilet supply line to the desired length. Use a hacksaw to cut the pex toilet supply line to the desired length.
4. Install a 1/2-inch PVC tee in the wall behind the toilet. To do this, drill a hole in the wall behind the toilet that is large enough to fit the 1/2-inch PVC tee. Insert the 1/2-inch PVC tee into the hole and secure it in place with a sealant.
5. Connect the pex toilet supply line to the 1/2-inch PVC tee. To do this, insert the pex toilet supply line into the 1/2-inch PVC tee and secure it in place with a sealant.
6. Install a 1/2-inch PVC cap on the end of the pex toilet supply line that is not connected to the 1/2-inch PVC tee. To do this, insert the 1/2-inch PVC cap onto the end of the pex toilet supply line and secure it in place with a sealant.
7. Install a 1/2-inch PVC elbow on the end of the pex toilet supply line that is connected to the 1/2-inch PVC tee. To do this, insert the 1/2-inch PVC elbow onto the end of the pex toilet supply line and secure it in place with a sealant.
8. Run the pex toilet supply line through the wall and into the crawl space or basement. Make sure that the pex toilet supply line is long enough to reach the water supply valve.
9. Connect the pex toilet supply line to the water supply valve. To do this, unscrew the 1/2-inch PVC union from the water supply valve and insert the pex toilet supply line into the union. Tighten the 1/2-inch PVC union until it is secure.
10. Turn on the water supply to the toilet. To do this, turn the shut-off valve clockwise until it is fully open.
11. Check for leaks. Look for any leaks around the pex toilet supply line. If you find any leaks, tighten the connections until the leaks stop.

By following these steps, you can easily hide your pex toilet supply line. This will help to improve the appearance of your bathroom and make it more aesthetically pleasing.

How to Hide Pex Toilet Supply Line?

Pex plumbing is a popular choice for new construction and remodeling projects because it is durable, flexible, and easy to install. However, one downside of Pex plumbing is that the supply lines can be unsightly, especially if they are exposed in a finished bathroom. If you’re looking for a way to hide your Pex toilet supply line, there are a few different options available.

Option 1: Use a Pex Conduit

One of the easiest ways to hide a Pex toilet supply line is to use a Pex conduit. A Pex conduit is a plastic sleeve that is designed to protect Pex plumbing lines. It is available in a variety of colors, so you can choose one that matches the dcor of your bathroom.

To install a Pex conduit, you will need to first measure the length of the supply line that you need to cover. Then, cut the conduit to size and slide it over the supply line. You can use a silicone sealant to secure the conduit in place, if desired.

Option 2: Use a Decorative Cover

Another option for hiding a Pex toilet supply line is to use a decorative cover. Decorative covers are available in a variety of styles, so you can choose one that complements the dcor of your bathroom.

To install a decorative cover, you will need to first measure the length of the supply line that you need to cover. Then, cut the cover to size and slide it over the supply line. You can use a silicone sealant to secure the cover in place, if desired.

Option 3: Use a Wall Chase

If you have the skills and tools, you can also hide your Pex toilet supply line by cutting a wall chase. A wall chase is a trench that is cut into the wall to create a hidden space for the supply line.

To cut a wall chase, you will need to use a saw or other cutting tool. Once the chase is cut, you can slide the supply line into the space and cover it with drywall.

Troubleshooting Tips

If you are having trouble hiding your Pex toilet supply line, here are a few troubleshooting tips:

  • Make sure that the supply line is long enough to reach the toilet without being stretched.
  • Use a Pex conduit or decorative cover that is the correct size for the supply line.
  • If you are cutting a wall chase, make sure that the chase is deep enough to accommodate the supply line.
  • If you are having trouble securing the conduit or cover in place, use a silicone sealant.

Additional Considerations

When hiding a Pex toilet supply line, there are a few additional considerations to keep in mind:

  • Make sure that the supply line is accessible for maintenance.
  • If you are using a Pex conduit, make sure that it is vented to prevent the build-up of condensation.
  • If you are using a decorative cover, make sure that it is not blocking the airflow to the toilet.

By following these tips, you can easily hide your Pex toilet supply line and create a more aesthetically pleasing bathroom.

Pex plumbing is a great option for new construction and remodeling projects. However, the unsightly supply lines can be a downside. By following the tips in this article, you can easily hide your Pex toilet supply line and create a more aesthetically pleasing bathroom.

How do I hide a PEX toilet supply line?

There are a few different ways to hide a PEX toilet supply line. Here are two of the most common methods:

1. Run the supply line behind the wall. This is the most common method, and it is relatively easy to do. To do this, you will need to cut a hole in the wall behind the toilet, run the supply line through the hole, and then patch the hole.
2. Use a PEX supply line cover. A PEX supply line cover is a plastic or metal sleeve that can be installed over the supply line to hide it. This is a simple and easy way to hide the supply line without having to cut a hole in the wall.

What materials do I need to hide a PEX toilet supply line?

The materials you will need to hide a PEX toilet supply line will vary depending on the method you choose. For the first method, you will need:

  • A utility knife
  • A drill
  • A saw
  • A hammer
  • Nails or screws
  • A piece of drywall
  • Plaster or joint compound
  • A paintbrush

For the second method, you will need:

  • A PEX supply line cover
  • A hacksaw
  • A screwdriver

How long does it take to hide a PEX toilet supply line?

The amount of time it takes to hide a PEX toilet supply line will vary depending on the method you choose and your skill level. For the first method, it will typically take around 2-3 hours. For the second method, it will typically take around 1-2 hours.

Is it difficult to hide a PEX toilet supply line?

No, it is not difficult to hide a PEX toilet supply line. The first method is relatively easy to do, and the second method is even easier. However, if you are not comfortable working with tools, you may want to hire a professional to do the job for you.

What are the benefits of hiding a PEX toilet supply line?

There are a few benefits to hiding a PEX toilet supply line. These include:

  • Aesthetics: A hidden supply line can improve the aesthetics of your bathroom by making it look more streamlined and organized.
  • Safety: A hidden supply line can help to prevent children from tripping over it.
  • Prevention of damage: A hidden supply line can help to prevent damage to the supply line in the event of a leak.

What are the risks of hiding a PEX toilet supply line?

There are a few risks associated with hiding a PEX toilet supply line. These include:

  • Difficulty of access: If the supply line is hidden, it may be difficult to access in the event of a leak.
  • Increased cost: Hiding a supply line can increase the cost of the project.
  • Potential damage to the supply line: If the supply line is not installed properly, it could be damaged.

How can I hide a PEX toilet supply line without cutting a hole in the wall?

You can hide a PEX toilet supply line without cutting a hole in the wall by using a PEX supply line cover. A PEX supply line cover is a plastic or metal sleeve that can be installed over the supply line to hide it. This is a simple and easy way to hide the supply line without having to cut a hole in the wall.

What are some other ways to hide a PEX toilet supply line?

There are a few other ways to hide a PEX toilet supply line. These include:

  • Run the supply line behind the toilet. This is a good option if you have a pedestal toilet or a toilet with a skirt.
  • Run the supply line through the floor. This is a good option if you have a raised toilet.
  • Use a decorative cover for the supply line. This is a good option if you don’t want to hide the supply line completely.

What is the best way to hide a PEX toilet supply line?

The best way to hide a PEX toilet supply line will vary depending on your specific situation. However, some of the best ways to hide a PEX toilet supply line include running the supply line behind the wall, using a PEX supply line cover, or running the supply line through the floor.

In this article, we have discussed how to hide a PEX toilet supply line. We have covered the different methods available, as well as the pros and cons of each. We have also provided tips on how to make your project as successful as possible.

We hope that this article has been helpful. If you have any questions or comments, please feel free to leave them below.

Here are some key takeaways from this article:

  • There are a few different methods for hiding a PEX toilet supply line.
  • The best method for you will depend on the specific circumstances of your project.
  • Before you begin, make sure to plan your project carefully and to take all necessary safety precautions.
  • By following these tips, you can successfully hide your PEX toilet supply line and create a beautiful and functional bathroom.

Author Profile

Liana Farrell
Liana Farrell
Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.

Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”

Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.