How to Change a Faucet Handle on Your Houses Exterior

AvatarByLiana Farrell Faucet Queries

How to Change an Outside Faucet Handle

Your outdoor faucet is a critical part of your home’s plumbing system. It allows you to water your plants, wash your car, and fill up your birdbath. But what happens when the faucet handle breaks? Or when the faucet starts to leak?

If you’re faced with either of these problems, you may be wondering how to change an outside faucet handle. Fortunately, this is a relatively simple task that you can do yourself. With a few tools and a little bit of time, you can have your outdoor faucet back in working order in no time.

In this article, we’ll walk you through the steps of how to change an outside faucet handle. We’ll provide detailed instructions and images, so you can follow along easily. So whether you’re a DIY novice or a seasoned pro, read on to learn how to change an outside faucet handle.

Before you begin, make sure you have the following tools:

Step Tools Instructions
1. Turn off the water supply to the faucet. Pliers Locate the shut-off valve for the faucet and turn it clockwise to the off position.
2. Remove the old handle. Screwdriver Use a screwdriver to loosen the screws that hold the old handle in place. Once the screws are loosened, you should be able to pry the handle off of the faucet.
3. Install the new handle. New handle Align the new handle with the faucet and screw it into place. Once the handle is screwed in, turn on the water supply to the faucet and test it to make sure it is working properly.

This guide will show you how to change a faucet handle on an outdoor faucet. This is a relatively simple task that can be completed in a few minutes with the right tools and materials.

Gather your tools and materials

You will need the following tools and materials to complete this project:

  • Replacement faucet handle
  • Adjustable wrench
  • Penetrating oil
  • Pliers
  • Screwdriver

Turn off the water supply to the faucet

The first step is to turn off the water supply to the faucet. This will prevent any water from spilling out when you remove the old handle.

To do this, locate the shut-off valve for the faucet. This is usually located near the base of the faucet, but it may be located elsewhere depending on the type of faucet you have.

Once you have located the shut-off valve, turn it clockwise to turn off the water supply.

Remove the old faucet handle

Now that the water supply is turned off, you can remove the old faucet handle.

To do this, you will need to use a screwdriver to remove the screws that hold the handle in place. These screws are usually located on the back of the handle.

Once you have removed the screws, you can carefully pry the handle off of the faucet. Be careful not to damage the faucet itself.

Install the new faucet handle

Now that the old handle is removed, you can install the new handle.

To do this, you will need to align the new handle with the faucet and then screw it into place using the screws that you removed from the old handle.

Once you have installed the new handle, you can turn the water supply back on and test the faucet to make sure it is working properly.

Changing a faucet handle is a relatively simple task that can be completed in a few minutes with the right tools and materials. By following these steps, you can easily replace a damaged or worn-out faucet handle and keep your outdoor faucet in good working order.

How To Change Outside Faucet Handle?

1. Prepare the Tools and Materials

To change an outside faucet handle, you will need the following tools and materials:

  • Adjustable wrench
  • Screwdriver
  • Penetrating oil
  • New faucet handle
  • Replacement washers (if necessary)
  • Pipe sealant (if necessary)

2. Turn Off the Water Supply

Before you can start working on the faucet, you will need to turn off the water supply to the faucet. This will prevent any water from spilling out of the faucet when you remove the old faucet handle.

To turn off the water supply, you will need to find the shut-off valve for the faucet. The shut-off valve is usually located near the faucet, but it may be located in a different location depending on the type of faucet you have.

Once you have found the shut-off valve, turn it clockwise to turn off the water supply to the faucet.

3. Remove the Old Faucet Handle

Now that the water supply to the faucet is turned off, you can remove the old faucet handle.

To remove the old faucet handle, you will need to use an adjustable wrench to loosen the screws that hold the faucet handle in place. The screws are usually located on the back of the faucet handle.

Once you have loosened the screws, you can remove the screws and the faucet handle.

4. Install the New Faucet Handle

Now that the old faucet handle is removed, you can install the new faucet handle.

To install the new faucet handle, you will need to place the new faucet handle on the faucet stem. The faucet stem is the part of the faucet that the faucet handle screws onto.

Once you have placed the new faucet handle on the faucet stem, you can use the screws to secure the faucet handle in place.

You may also need to replace the washers on the faucet stem. The washers help to create a seal between the faucet handle and the faucet stem.

If you need to replace the washers, you will need to remove the old washers and then install the new washers.

Once you have installed the new faucet handle and washers, you can turn on the water supply to the faucet and test the new faucet handle.

Changing an outside faucet handle is a relatively simple task that can be completed in a few minutes. By following these steps, you can easily change your outside faucet handle and keep your home’s exterior looking its best.

Q: How do I know if my faucet handle needs to be replaced?

A: There are a few signs that your faucet handle may need to be replaced. These include:

  • The handle is difficult to turn.
  • The handle is loose or wobbly.
  • The handle is leaking.
  • The handle is discolored or damaged.

If you notice any of these signs, it’s a good idea to have the faucet handle replaced as soon as possible.

Q: What tools do I need to change a faucet handle?

A: You will need the following tools to change a faucet handle:

  • A screwdriver
  • A wrench
  • Penetrating oil
  • A rag

Q: How do I remove the old faucet handle?

1. Turn off the water supply to the faucet.
2. Locate the screws that hold the faucet handle in place.
3. Use a screwdriver to remove the screws.
4. If the handle is stuck, apply a few drops of penetrating oil to the screws and let it sit for a few minutes.
5. Use a wrench to turn the handle counterclockwise until it comes loose.

Q: How do I install the new faucet handle?

1. Align the new faucet handle with the faucet body.
2. Insert the screws into the holes in the handle.
3. Use a screwdriver to tighten the screws.
4. Turn on the water supply to the faucet and test the handle to make sure it works properly.

Q: What if I can’t find a replacement faucet handle that matches my old one?

If you can’t find a replacement faucet handle that matches your old one, you can purchase a universal faucet handle. Universal faucet handles are designed to fit a variety of different faucets.

Q: How much does it cost to replace a faucet handle?

The cost of replacing a faucet handle varies depending on the type of faucet and the cost of the replacement handle. Faucet handles typically cost between $10 and $50. The cost of labor to replace a faucet handle is typically between $50 and $100.

Q: Can I replace a faucet handle myself?

Yes, you can replace a faucet handle yourself. However, if you are not comfortable working with plumbing, you may want to hire a professional to do the job for you.

Changing an outside faucet handle is a relatively simple task that can be completed in a few minutes. By following the steps in this guide, you can easily replace a broken or worn-out handle with a new one.

Here are the key takeaways from this guide:

  • Before you begin, make sure you have the right tools and materials.
  • Turn off the water supply to the faucet before you start working.
  • Remove the old handle by unscrewing the screws that hold it in place.
  • Install the new handle by reversing the steps for removing the old handle.
  • Turn on the water supply and test the faucet to make sure it is working properly.

By following these steps, you can easily change an outside faucet handle and keep your home’s plumbing in good working order.

Author Profile

Liana Farrell
Liana Farrell
Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.

Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”

Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.