How to Replace a Delta Shower Faucet: A Step-by-Step Guide

AvatarByLiana Farrell Faucet Queries

How to Change a Delta Shower Faucet

Your Delta shower faucet is one of the most important parts of your bathroom. It’s what allows you to get clean, and it can also be a source of annoyance if it starts to leak or malfunction. If you’re experiencing problems with your Delta shower faucet, you may be able to fix it yourself by replacing it. Changing a Delta shower faucet is a relatively simple task, but it does require some basic tools and knowledge. In this article, we’ll walk you through the process of changing a Delta shower faucet, step-by-step.

We’ll start by discussing the tools and materials you’ll need, then we’ll walk you through the steps of removing the old faucet and installing the new one. By the end of this article, you’ll be able to change your Delta shower faucet like a pro.

Step Instructions Images
1 Turn off the water supply to the faucet.
2 Remove the old faucet.
3 Install the new faucet.
4 Turn on the water supply and test the faucet.

How to Change a Delta Shower Faucet

Gather the necessary tools and materials

Before you begin, gather the following tools and materials:

  • A Phillips head screwdriver
  • A flathead screwdriver
  • A basin wrench
  • A new shower faucet
  • A plumber’s putty
  • Teflon tape
  • A bucket
  • A towel

Shut off the water supply to the faucet

1. Locate the shut-off valve for the shower faucet. It is typically located near the water heater or the main water line.
2. Turn the shut-off valve clockwise to turn off the water to the faucet.
3. Allow the water to drain from the faucet.

Remove the old shower faucet

1. Use the basin wrench to loosen the nuts that secure the shower faucet to the wall.
2. Once the nuts are loose, carefully remove the shower faucet from the wall.
3. Be careful not to damage the plumbing behind the faucet.

Install the new shower faucet

1. Apply a thin layer of plumber’s putty to the threads of the new shower faucet.
2. Thread the new shower faucet onto the water lines.
3. Tighten the nuts that secure the shower faucet to the wall.
4. Turn on the water supply to the faucet and check for leaks.

Reattach the shower head

1. If the shower head is not included with the new faucet, you will need to purchase a new one.
2. Attach the shower head to the new faucet.
3. Turn on the water and enjoy your new shower faucet!

Changing a Delta shower faucet is a relatively simple task that can be completed in about an hour. By following these steps, you can easily replace your old faucet with a new one that will improve the look and function of your shower.

Here are some additional tips for changing a Delta shower faucet:

  • If you are not comfortable working with plumbing, you may want to hire a professional to do the job for you.
  • Make sure to turn off the water supply to the faucet before you begin work.
  • Be careful not to damage the plumbing behind the faucet.
  • Use a new gasket when installing the new shower faucet.
  • Tighten the nuts that secure the shower faucet to the wall securely.
  • Turn on the water supply to the faucet and check for leaks.

3. Remove the old faucet

To remove the old faucet, you will need:

  • A basin wrench
  • A screwdriver
  • Penetrating oil
  • A bucket
  • A towel

1. Turn off the water supply to the faucet. This is usually located behind the faucet, near the floor.
2. Remove the screws that hold the faucet to the sink. These screws are usually located behind the handle or on the bottom of the faucet.
3. Use a basin wrench to loosen the nuts that hold the faucet to the pipes. Be careful not to damage the pipes.
4. Apply penetrating oil to the threads of the nuts and let it sit for a few minutes. This will help loosen them.
5. Use the basin wrench to turn the nuts counterclockwise until they are loose.
6. Remove the nuts and the faucet from the sink.
7. Clean the area around the faucet with a towel.

4. Install the new faucet

To install the new faucet, you will need:

  • The new faucet
  • A basin wrench
  • A screwdriver
  • Teflon tape
  • A bucket
  • A towel

1. Place the new faucet in the sink and make sure it is centered.
2. Apply Teflon tape to the threads of the nuts.
3. Hand-tighten the nuts to the pipes. Do not overtighten them.
4. Use the basin wrench to tighten the nuts to the pipes.
5. Turn on the water supply to the faucet and check for leaks.
6. Tighten the nuts as needed to stop any leaks.
7. Replace the screws that hold the faucet to the sink.
8. Clean the area around the faucet with a towel.

Replacing a Delta shower faucet is a relatively simple task that can be completed in a few hours. By following these steps, you can save money and have a new faucet that will last for years to come.

How do I remove a Delta shower faucet?

1. Turn off the water supply to the faucet.
2. Remove the escutcheon (the decorative cover around the faucet) by unscrewing it counterclockwise.
3. Remove the screws that hold the faucet handles in place.
4. Pull the handles off of the faucet.
5. Use a wrench to loosen the nuts that hold the faucet body in place.
6. Pull the faucet body out of the wall.

How do I install a Delta shower faucet?

1. Make sure that the water supply to the faucet is turned off.
2. Align the new faucet body with the holes in the wall.
3. Insert the screws that hold the faucet body in place and tighten them with a wrench.
4. Attach the escutcheon to the faucet body.
5. Screw the handles onto the faucet body.
6. Turn on the water supply to the faucet and test it to make sure that it is working properly.

What tools do I need to change a Delta shower faucet?

You will need the following tools to change a Delta shower faucet:

  • A wrench
  • A screwdriver
  • Penetrating oil

How long does it take to change a Delta shower faucet?

The amount of time it takes to change a Delta shower faucet will vary depending on the skill of the person doing the job. However, it typically takes between 30 minutes and an hour.

What is the most common mistake people make when changing a Delta shower faucet?

The most common mistake people make when changing a Delta shower faucet is not turning off the water supply to the faucet before they start. This can result in water damage to the surrounding area.

Can I change a Delta shower faucet myself?

Yes, you can change a Delta shower faucet yourself. However, it is important to make sure that you have the proper tools and skills to do the job. If you are not comfortable doing the job yourself, you can hire a plumber to do it for you.

Changing a Delta shower faucet is a relatively simple task that can be completed in a few steps. By following the steps outlined in this guide, you can easily replace your old faucet with a new one that is more stylish and efficient.

Here are the key takeaways from this guide:

  • Before you begin, make sure you have the necessary tools and materials.
  • Turn off the water supply to the faucet and drain the water from the pipes.
  • Remove the old faucet by unscrewing the mounting screws and nuts.
  • Install the new faucet by following the instructions that came with it.
  • Turn on the water supply and test the faucet to make sure it is working properly.

By following these steps, you can easily change your Delta shower faucet and enjoy a new, more stylish and efficient shower.

Author Profile

Liana Farrell
Liana Farrell
Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.

Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”

Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.