How to Repair a Woodford Model 17 Faucet

AvatarByLiana Farrell Faucet Queries

How to Repair a Woodford Model 17 Faucet

Your Woodford Model 17 faucet is a reliable and durable fixture, but like all things, it will eventually need to be repaired. Fortunately, repairing a Woodford Model 17 faucet is a relatively simple task that can be completed in just a few minutes.

In this article, we will walk you through the steps of repairing a Woodford Model 17 faucet, including:

  • Identifying the problem
  • Gathering your tools and materials
  • Removing the faucet
  • Replacing the damaged parts
  • Reinstalling the faucet

By following these steps, you can easily and affordably repair your Woodford Model 17 faucet and get it back to working order in no time.

Step Instructions Image
1 Turn off the water supply to the faucet.
2 Remove the handle by unscrewing the set screws.
3 Remove the stem by unscrewing it from the bottom of the faucet.
4 Inspect the stem for wear or damage.
5 Replace the stem if necessary.
6 Reassemble the faucet.
7 Turn on the water supply to the faucet.

Identifying the Problem

How to tell if your Woodford Model 17 faucet is leaking

There are a few ways to tell if your Woodford Model 17 faucet is leaking.

  • Look for water droplets or puddles under the faucet. This is the most obvious sign of a leak. If you see water droplets or puddles under your faucet, it’s a good indication that there’s a problem.
  • Listen for dripping noises. Another sign of a leak is a dripping noise. If you hear a dripping noise coming from your faucet, it’s likely that there’s a leak.
  • Check the water meter. If you’re not sure if your faucet is leaking, you can check the water meter. If the water meter is moving even when you’re not using water, it’s a good indication that there’s a leak.

What are the common causes of Woodford Model 17 faucet leaks

There are a few common causes of Woodford Model 17 faucet leaks.

  • O-rings. The O-rings in your faucet can wear out over time and allow water to leak.
  • Cartridges. The cartridges in your faucet can also wear out and leak.
  • Drip valves. The drip valves in your faucet can become clogged and allow water to leak.
  • Valve seats. The valve seats in your faucet can become worn and allow water to leak.

Gathering the Tools and Materials You Need

To repair a Woodford Model 17 faucet, you will need the following tools and materials:

  • Tools
  • Adjustable wrench
  • Pliers
  • Screwdriver
  • Penetrating oil
  • Pipe wrench
  • Materials
  • New O-rings
  • New cartridges
  • New drip valves
  • New valve seats
  • Plumber’s putty
  • Teflon tape

Repairing Your Woodford Model 17 Faucet

To repair your Woodford Model 17 faucet, follow these steps:

1. Turn off the water supply to the faucet. To do this, locate the shut-off valve for the faucet and turn it clockwise until it is completely closed.
2. Remove the faucet handles. To do this, use a screwdriver to remove the screws that hold the handles in place.
3. Remove the faucet stem. To do this, use a wrench to loosen the nut that holds the stem in place. Once the nut is loose, you can pull the stem out of the faucet body.
4. Inspect the O-rings, cartridges, drip valves, and valve seats. Look for any damage or wear that could be causing the leak. If you find any damage, replace the damaged parts.
5. Reassemble the faucet. Put the new O-rings, cartridges, drip valves, and valve seats in place. Then, reassemble the faucet in the reverse order of disassembly.
6. Turn on the water supply to the faucet. Make sure that the faucet is not leaking. If it is still leaking, repeat the steps above until the leak is fixed.

By following these steps, you can easily repair a Woodford Model 17 faucet. If you are not comfortable doing this type of work, you can always call a plumber to help you.

3. Replacing the O-Ring

The O-ring is a small, rubber ring that seals the connection between the faucet handle and the faucet body. If the O-ring is damaged or worn out, it can cause the faucet to leak. To replace the O-ring, you will need:

  • A new O-ring (the size of the O-ring can be found on the old O-ring)
  • A small flathead screwdriver
  • A pair of pliers

1. Turn off the water supply to the faucet.
2. Remove the faucet handle by unscrewing the setscrews that hold it in place.
3. Use the flathead screwdriver to pry up the old O-ring.
4. Apply a small amount of plumber’s grease to the new O-ring.
5. Insert the new O-ring into the groove in the faucet body.
6. Replace the faucet handle and tighten the setscrews.
7. Turn on the water supply to the faucet and check for leaks.

4. Reassembling the Faucet

To reassemble the faucet, you will need:

  • The old faucet parts
  • A new faucet seat
  • A new faucet washer
  • A new faucet stem
  • A new faucet handle
  • A faucet wrench
  • A plumber’s putty

1. Remove the old faucet parts from the faucet body.
2. Apply a small amount of plumber’s putty to the new faucet seat.
3. Insert the new faucet seat into the faucet body.
4. Apply a small amount of plumber’s putty to the new faucet washer.
5. Insert the new faucet washer onto the new faucet stem.
6. Insert the new faucet stem into the faucet body.
7. Apply a small amount of plumber’s putty to the new faucet handle.
8. Insert the new faucet handle onto the new faucet stem.
9. Tighten the faucet handle with the faucet wrench.
10. Turn on the water supply to the faucet and check for leaks.

Q: How do I remove the handle on a Woodford Model 17 faucet?

A: To remove the handle on a Woodford Model 17 faucet, you will need a flathead screwdriver.

1. Turn off the water supply to the faucet.
2. Locate the screw underneath the handle.
3. Use the screwdriver to loosen the screw and remove the handle.

Q: How do I replace the cartridge in a Woodford Model 17 faucet?

A: To replace the cartridge in a Woodford Model 17 faucet, you will need a flathead screwdriver and a new cartridge.

1. Turn off the water supply to the faucet.
2. Remove the handle by following the instructions above.
3. Remove the old cartridge by unscrewing it from the faucet body.
4. Apply a thin coat of plumber’s grease to the new cartridge.
5. Insert the new cartridge into the faucet body and screw it in place.
6. Replace the handle.

Q: How do I fix a leaking Woodford Model 17 faucet?

A: There are a few possible causes for a leaking Woodford Model 17 faucet.

  • The faucet is not turned off all the way. Make sure that the handle is turned all the way to the off position.
  • The faucet washer is worn out. The faucet washer is a small rubber gasket that seals the faucet stem to the faucet body. If the washer is worn out, it will not create a tight seal and water will leak out. To replace the washer, you will need to remove the handle and cartridge, and then install a new washer.
  • The faucet stem is damaged. The faucet stem is the metal rod that connects the handle to the cartridge. If the stem is damaged, it will not be able to create a tight seal and water will leak out. To replace the stem, you will need to remove the handle and cartridge, and then install a new stem.

Q: How do I prevent my Woodford Model 17 faucet from leaking?

A: There are a few things you can do to prevent your Woodford Model 17 faucet from leaking.

  • Turn off the water supply to the faucet when you are not using it. This will help to prevent the faucet from dripping.
  • Inspect the faucet regularly for leaks. If you see any leaks, fix them immediately.
  • Use high-quality faucet washers and seals. Cheap faucet washers and seals are more likely to leak.
  • Keep the faucet clean and free of debris. Debris can clog the faucet and cause it to leak.

    In this blog post, we have discussed how to repair a Woodford Model 17 faucet. We have covered the steps involved in removing the faucet, identifying the problem, and replacing the necessary parts. We have also provided tips on how to prevent future problems.

We hope that this information has been helpful. If you have any further questions, please do not hesitate to contact us.

Author Profile

Liana Farrell
Liana Farrell
Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.

Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”

Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.