What Can You Use to Plug a Bathtub Drain?

You can plug a bathtub drain with a rubber or silicone tub stopper, a flat silicone drain cover, or, temporarily, a damp washcloth inside a sturdy plastic bag. The water stopper in a bath is usually called a bathtub drain stopper, tub plug, or drain cover. The best choice depends on whether you need a quick seal for one bath or a replacement that will stay in place every day.

What Plugs a Bathtub Drain

A bathtub plug has one job: seal the drain opening well enough to hold bathwater. It should sit on or in the drain without being able to fall into the pipe.

Common options include:

  • Rubber tub stopper: A tapered rubber plug that fits into the drain opening. This is a simple, inexpensive choice for a tub with no built-in stopper.
  • Flat silicone drain cover: A flexible disc that lies over a smooth, flat drain area and seals through water pressure and suction.
  • Built-in stopper: A toe-touch, push-pull, lift-and-turn, pop-up, or trip-lever stopper installed as part of the drain assembly.
  • Drop-in stopper with a hair basket: A replacement stopper that sits in the drain and also catches hair and debris.
  • Temporary cloth-and-bag plug: An improvised seal for a tub with no stopper.

Do not try to plug the overflow opening on the front wall of the tub. That opening is there to prevent accidental overfilling and is not the drain you should seal for a bath.

How to Plug a Bathtub Drain Without a Built-In Stopper

Start with a clean drain opening. Hair, soap film, and a bent drain flange can keep even a good stopper from sealing.

Use this table to choose the simplest reliable option for your tub.

What You Need Best Option When It Works Best
A bath today, with no stopper Flat silicone drain cover The tub floor around the drain is smooth and flat
A basic everyday plug Rubber tub stopper The stopper fits snugly into the drain opening
A lasting replacement with hair control Drop-in stopper with basket You want a removable stopper that catches debris
A very short-term emergency plug Damp washcloth in a plastic bag The bag remains completely above the drain opening
A built-in stopper that leaks Matching replacement or repair The drain already has a toe-touch, lift-and-turn, or lever mechanism

Step 1: Inspect the Drain and Choose the Plug

  1. Empty the tub and remove loose hair, soap residue, and anything sitting in the drain.
  2. Look at the stopper situation. If there is no mechanism at all, choose a rubber stopper, silicone cover, or drop-in replacement.
  3. If the tub has a lever on the overflow plate, a toe-touch cap, or a threaded metal stopper, choose a replacement made for that type of drain.
  4. Make sure a temporary plug is wider than the opening and cannot slip down into it.

The most reliable bathtub plug is one that seals at the drain opening without being able to slip into the drain.

Step 2: Clean the Sealing Surface

  1. Wipe the drain rim and the surrounding tub surface with a damp cloth.
  2. Remove hair wrapped around an existing stopper or caught beneath its cap.
  3. Rinse away soap film, then wipe the area dry enough to inspect it.
  4. Check for sharp edges, cracks, or a drain flange that sits noticeably above the tub floor. A flat drain cover may not seal well over an uneven surface.

I use a bathtub drain stopper as a quick check because it helps separate a worn built-in mechanism from a problem with the drain opening itself.

Step 3: Install and Test the Plug

Choose the method that matches the plug you have.

Install a flat silicone drain cover carefully:

  1. Lay the cover flat over the drain so it extends beyond the opening on every side.
  2. Press the cover against the tub floor to remove trapped air.
  3. Run water into the tub and watch the drain area for a few moments.
  4. If water slips underneath the cover, lift it, clean the surface again, and reset it. If it still leaks, use a rubber stopper or a properly fitted replacement instead.
  5. When you are done bathing, lift one outer edge of the cover to break the seal and let the tub drain.

Fit a rubber tub stopper securely:

  1. Place the tapered end into the drain opening.
  2. Press it down evenly so the rubber makes contact all around the inside edge of the drain.
  3. Add water and check that the level holds.
  4. If it leaks, remove the stopper, clean both surfaces, and try again. If the stopper feels loose, it is not the right size for that opening.
  5. Pull the stopper out by its ring or chain before draining the tub.

Use a temporary washcloth-and-bag plug only for a short-term seal:

  1. Dampen a washcloth and fold it into a compact pad.
  2. Put it inside a sturdy resealable plastic bag and close the bag securely.
  3. Set the bag over the drain rather than pushing it into the drain.
  4. Hold it in place while you add water and confirm that it stays above the opening and slows or stops the water.
  5. Remove the bag before draining the tub. Do not leave this type of plug unattended or rely on it as a permanent solution.

Install a drop-in replacement stopper that matches your drain:

  1. Confirm that the stopper is intended for bathtub use and matches your drain style.
  2. Set it into the existing drain as directed by its design.
  3. Press or turn the stopper into its closed position.
  4. Fill the tub enough to verify that the seal holds, then open the stopper and make sure water drains freely.

What Not to Use as a Bathtub Plug

Avoid improvised items that can become stuck in the drain or leave residue behind.

Do not use:

  • Plumber’s putty, caulk, wax, or adhesive tape as a surface plug
  • A small cup, bottle cap, jar lid, or other rigid item that could slip into the drain
  • Glass, ceramic, or metal objects that could chip the tub or damage the drain finish
  • Expanding foam or any material meant to harden in place
  • A rag pushed down into the drain pipe

If an item can be pulled into the pipe, it can create a clog that is harder to fix than a missing stopper.

Replacing a Built-In Bathtub Stopper

A replacement is usually better than an improvised plug if you take baths regularly. First identify how the current stopper operates, because the visible cap does not always reveal what is happening below the drain.

Toe-Touch, Push-Pull, and Lift-and-Turn Stoppers

Toe-touch, push-pull, and lift-and-turn stoppers sit directly in the drain.

  • A toe-touch stopper opens and closes when pressed with a foot or hand.
  • A push-pull stopper opens when pulled up and closes when pushed down.
  • A lift-and-turn stopper is raised and turned to change position.

These styles may screw into the drain crossbar or attach to a threaded post. If the stopper is loose, damaged, or missing, buy a replacement that matches the existing thread and operating style rather than forcing in a random stopper.

Lever-Operated and Pop-Up Stoppers

A trip lever on the overflow plate may operate a visible stopper, or it may control a plunger inside the overflow pipe.

Drain Strain designed its replacement stopper for lever-actuated drain stoppers and has tested it to fit in over 90% of household drains. That is useful compatibility information for that product, but it does not guarantee that every tub or drain assembly will match.

Drain Buddy Tub Ultra Flo is a purpose-made tub stopper option. Drain Buddy uses a built-in basket to catch hair, jewelry, and debris before they enter the drain, so it can serve as both a stopper and a hair catcher.

To install Drain Buddy, place it in the existing drain and use its push-and-pop installation action to seat it. The maker’s drop-in setup requires no tools and takes under 10 seconds; press the stopper down afterward to seal the drain.

When the Lever Does Not Work

If moving the overflow lever does nothing, the linkage or internal plunger may be disconnected, corroded, or out of adjustment. Do not pull hard on the overflow plate or force parts down the drain.

Call a plumber if the overflow plate is loose, the linkage will not come out cleanly, or the tub leaks behind the wall when the lever is used.

Why a Bathtub Drain Still Will Not Hold Water

A new plug can still leak if the issue is not the plug itself.

The Stopper Does Not Sit Flat

Hair, soap buildup, or mineral deposits can hold the stopper slightly off the drain. Clean the rim, underside of the stopper, and visible threads, then test it again.

A warped rubber plug or bent metal stopper should be replaced. A warped rubber plug or bent metal stopper should be replaced.

Water Stops at the Overflow Opening

If water drains away only after it reaches the overflow opening, the overflow is doing its job. It is designed to route excess water into the drain system before the tub can overfill.

Do not cover or seal the overflow opening to make the bath deeper. Doing so removes an important overflow path and can lead to water damage.

Water Drops Below the Drain Stopper

If the water level falls while it remains below the overflow opening, the stopper is not sealing. Try cleaning it or reseating it.

If water appears under the tub, on the ceiling below, around the tub base, or behind the overflow plate, stop using the tub and call a plumber. That points to a plumbing leak rather than a simple stopper problem.

Keeping the Drain Clear After You Replace the Plug

A stopper that catches hair can prevent many slow-drain problems before they begin.

  • Pull visible hair from the stopper or basket when you see it.
  • Rinse removable baskets and drain covers so water can pass through them freely.
  • Wipe the stopper’s sealing edge when soap residue builds up.
  • Use the stopper’s intended control to open and close mechanical stoppers.
  • Remove jewelry before bathing when possible; a basket-style stopper can help catch dropped items before they enter the drain.

If the tub drains slowly even with the stopper removed, the problem is likely a developing clog farther down the pipe. Start with hair removal from the drain opening; call a plumber if water backs up repeatedly or sewage appears.

Frequently Asked Questions

What Is the Water Stopper in a Bath Called?

The water stopper in a bath is usually called a bathtub drain stopper, tub plug, or drain cover. Its name can also reflect whether it is built into the drain assembly. Built-in versions may also be called toe-touch, lift-and-turn, push-pull, pop-up, or trip-lever stoppers, depending on how they operate.

How Do You Plug a Bathtub if You Do Not Have a Plug?

Use a flat silicone drain cover if the tub floor around the drain is smooth and clean. A rubber tub stopper is a better everyday fix because it fits into the drain opening, while a damp washcloth inside a sturdy plastic bag can work as a short-term emergency seal when kept above the drain.

How Does a Pop-Up Bathtub Stopper Work?

A pop-up bathtub stopper seals when its plug moves down against the drain and opens when the plug lifts. In a lever-operated tub, the overflow lever may move an internal linkage or plunger that controls water flow; in a toe-touch version, a spring mechanism opens and closes the stopper when pressed.

How Do I Know What Type of Bathtub Drain I Have?

Look for the control point. A cap that presses down is usually toe-touch, a cap that lifts or twists is often push-pull or lift-and-turn, and a lever on the overflow plate usually means a trip-lever or pop-up system. Match a replacement to the operating mechanism, not just to the appearance of the stopper.

Is a Bathtub Drain 1½ or 2 Inches?

Waste-line size alone does not reliably identify the size of the visible drain opening or stopper threads. Measure the existing stopper or drain opening and match the replacement product to that measurement and stopper style.

Can You Use a Sink Stopper in a Bathtub?

Only use a sink stopper if it is specifically listed to fit the bathtub drain and cannot fall into the opening. A bathtub-specific rubber stopper, flat silicone cover, or compatible drop-in stopper is usually the safer choice. If your current stopper leaks or is missing, choose the replacement style that matches the tub’s mechanism and test it before filling the tub.

How does a drop-in bathtub stopper work?

Drain Buddy Tub Ultra Flo seals the drain after you drop it into place and press it down. Its maker says the drop-in setup takes under 10 seconds.

Can you replace a broken lever-operated bathtub stopper?

Yes. Drain Strain is designed as a universal replacement stopper for lever-actuated drain stoppers, and its manufacturer reports that testing found it fit over 90% of household drains. Compatibility does not guarantee that every tub or drain assembly will match, so match the replacement to the operating mechanism and existing drain style.