How to Convert a Shower Stall into a Bathtub: A Step-by-Step Guide

How to Turn a Shower into a Bathtub

A shower is a convenient way to get clean, but sometimes you just want to soak in a tub. If you have a shower but no bathtub, you can easily turn it into one with a few simple steps.

This article will walk you through the process of converting a shower into a bathtub, from removing the showerhead and drain to installing a new tub and faucet. We’ll also provide tips on how to make your new bathtub as comfortable and inviting as possible.

So if you’re ready to take a relaxing bath in your own home, read on!

Step	Instructions	Image
1	Disconnect the water supply to the shower.
2	Remove the shower head and faucet.
3	Cut the drywall around the shower.
4	Install the bathtub.
5	Reattach the water supply to the bathtub.
6	Install the shower head and faucet.

Tools and Materials Needed

To turn a shower into a bathtub, you will need the following tools and materials:

• Tub: The size of the tub will depend on the size of your bathroom. If you have a small bathroom, you may want to consider a smaller tub. If you have a large bathroom, you may want to consider a larger tub.
• Shower surround: You will need to remove the existing shower surround before you can install the bathtub. You can either purchase a new shower surround or reuse the existing one.
• Plumbing supplies: You will need to purchase new plumbing supplies to connect the bathtub to your existing plumbing. This includes a bathtub drain, a bathtub faucet, and a bathtub overflow.
• Tools: You will need the following tools to complete the project:
• A hammer
• A chisel
• A saw
• A screwdriver
• A wrench
• A tape measure
• A level
• A pencil
• A utility knife

Removing the Shower Surround

To remove the shower surround, you will need to follow these steps:

1. Remove the shower door and hardware.
2. Remove the shower tiles.
3. Remove the shower pan.

Removing the Shower Door and Hardware

1. Remove the shower door handles.
2. Remove the shower door hinges.
3. Remove the shower door frame.

Removing the Shower Tiles

1. Remove the grout between the tiles.
2. Use a chisel to pry up the tiles.
3. Remove the tiles from the wall.

Removing the Shower Pan

1. Remove the shower pan drain.
2. Remove the shower pan flange.
3. Remove the shower pan from the floor.

Installing the Tub

To install the bathtub, you will need to follow these steps:

1. Place the bathtub in the desired location.
2. Connect the bathtub to the plumbing.
3. Install the shower surround.

Placing the Tub

1. Make sure that the bathtub is level.
2. Use shims under the bathtub legs to level the bathtub if necessary.

Connecting the Tub to the Plumbing

1. Connect the bathtub drain to the drain pipe.
2. Connect the bathtub faucet to the hot and cold water supply lines.
3. Connect the bathtub overflow to the overflow pipe.

Installing the Shower Surround

1. Install the shower surround according to the manufacturer’s instructions.

Turning a shower into a bathtub is a relatively simple project that can be completed in a few hours. By following these steps, you can easily transform your shower into a luxurious bathtub.

Installing the Tub

Once you have removed the old shower, you will need to install the new bathtub. Here are the steps involved:

1. Place the tub in the desired location. The tub should be placed so that the drain is located in the center of the drain pipe. Make sure that there is enough space around the tub for the shower surround.
2. Connect the tub to the plumbing. The tub will need to be connected to the hot and cold water supply lines and the drain line. The drain line should be connected to the P-trap under the sink.
3. Install the shower surround. The shower surround will protect the walls from water damage. It can be made of a variety of materials, such as tile, acrylic, or fiberglass.

Testing the Tub

Once the tub is installed, you will need to test it to make sure there are no leaks. Here are the steps involved:

1. Run the water to make sure the drain is working properly. The water should drain quickly and without any problems.
2. Check for leaks around the tub. Look for any signs of water seeping out from under the tub or around the shower surround.
3. Enjoy your new bathtub!

Converting a shower into a bathtub is a relatively simple project that can be completed in a few hours. By following these steps, you can create a beautiful and relaxing bathtub that will add value to your home.

Here are some additional tips for converting a shower into a bathtub:

• Choose a bathtub that is the right size for your bathroom.
• Make sure the bathtub is compatible with your existing plumbing.
• Consider hiring a professional plumber to help you with the installation.

With a little planning and effort, you can easily turn your shower into a bathtub that you will love for years to come.

How To Turn Shower Into Bathtub?

• Q: What are the steps involved in converting a shower into a bathtub?

A: The steps involved in converting a shower into a bathtub are as follows:

1. Remove the shower stall.
2. Install a new bathtub.
3. Connect the bathtub to the plumbing.
4. Caulk around the bathtub.
5. Add a shower curtain or liner.

• Q: What tools and materials do I need to convert a shower into a bathtub?

A: You will need the following tools and materials to convert a shower into a bathtub:

• A hammer
• A saw
• A drill
• A screwdriver
• A tape measure
• A level
• A pencil
• A caulk gun
• A bathtub
• A bathtub faucet
• A bathtub drain
• A shower curtain or liner
• Plumbing supplies

• Q: How much does it cost to convert a shower into a bathtub?

The cost of converting a shower into a bathtub will vary depending on the size and type of bathtub you choose, as well as the cost of labor. However, you can expect to pay anywhere from \$500 to \$1,500 for the project.

• Q: Is it difficult to convert a shower into a bathtub?

Converting a shower into a bathtub is a relatively simple project, but it does require some basic DIY skills. If you are not comfortable working with tools or plumbing, you may want to hire a professional to do the job for you.

• Q: What are the benefits of converting a shower into a bathtub?

There are several benefits to converting a shower into a bathtub, including:

• A bathtub is more comfortable for bathing than a shower.
• A bathtub can be used for both bathing and showering.
• A bathtub can add value to your home.

• Q: What are the drawbacks of converting a shower into a bathtub?

There are a few drawbacks to converting a shower into a bathtub, including:

• A bathtub takes up more space than a shower.
• A bathtub is more expensive to install than a shower.
• A bathtub is more difficult to clean than a shower.

• Q: Can I convert a walk-in shower into a bathtub?

Yes, you can convert a walk-in shower into a bathtub. However, this will require more work than converting a standard shower into a bathtub, as you will need to remove the shower door and frame. You will also need to make sure that the bathtub is large enough to fit in the space where the shower was located.

• Q: What is the best type of bathtub to convert a shower into?

The best type of bathtub to convert a shower into is a standard bathtub. Standard bathtubs are typically the easiest to install and are available in a variety of sizes and styles.

• Q: How do I choose the right bathtub for my shower?

When choosing a bathtub for your shower, you will need to consider the following factors:

• The size of the bathtub.
• The style of the bathtub.
• The material of the bathtub.
• The price of the bathtub.

• Q: How do I install a bathtub?

Installing a bathtub is a relatively simple project, but it does require some basic DIY skills. If you are not comfortable working with tools or plumbing, you may want to hire a professional to do the job for you.

To install a bathtub, you will need the following tools and materials:

• A hammer
• A saw
• A drill
• A screwdriver
• A tape measure
• A level
• A pencil
• A caulk gun
• A bathtub
• A bathtub faucet
• A bathtub drain
• A shower curtain or liner
• Plumbing supplies

The steps involved in installing a bathtub are as follows:

1. Remove the old shower stall.
2. Cut a hole in the wall for the bathtub drain.
3. Connect the bathtub drain to the plumbing.
4. Connect the bathtub faucet to the plumbing.
5. Caulk around the bathtub.
6. Add a shower curtain or liner.

• Q: How do I connect a bathtub to the plumbing?

To connect a bathtub to the plumbing, you will need to:

1. Connect the bathtub drain to the sewer line.
2. Connect the bathtub faucet to the hot and cold water lines.
3. Turn on the water to the bathtub and check for leaks.

• Q: How do I caulk around a bathtub?

To caulk around a bathtub, you will

In this blog post, we have discussed how to turn a shower into a bathtub. We have covered the steps involved in the process, as well as the materials and tools you will need. We have also provided tips on how to make the most of your new bathtub.

We hope that this blog post has been helpful and that you are now able to turn your shower into a bathtub. If you have any questions, please feel free to leave a comment below.