How to Reposition a Toilet for a Better Bathroom Layout
How to Reposition a Toilet
Your toilet is one of the most important fixtures in your home, but what happens when it needs to be repositioned? Whether you’re remodeling your bathroom or simply want to change the layout of your space, relocating your toilet can be a daunting task. But don’t worry, we’re here to help. In this comprehensive guide, we’ll walk you through the entire process, from start to finish. We’ll cover everything you need to know, from how to disconnect the toilet from the water supply and drain to how to properly level and secure it in its new location. So if you’re ready to give your bathroom a makeover, read on for all the details on how to reposition a toilet.
Step | Instructions | Image |
---|---|---|
1 | Turn off the water supply to the toilet. | |
2 | Disconnect the water supply line from the toilet. | |
3 | Disconnect the toilet from the floor flange. | |
4 | Lift the toilet off the floor and set it aside. | |
5 | Position the new toilet where you want it. | |
6 | Connect the toilet to the floor flange. | |
7 | Connect the water supply line to the toilet. | |
8 | Turn on the water supply to the toilet. | |
9 | Test the toilet to make sure it is working properly. |
Repositioning a toilet is a relatively simple task that can be completed in a few hours. However, it is important to follow the proper steps to ensure that the job is done correctly and safely. This guide will walk you through the process of repositioning a toilet, from start to finish.
Tools and materials needed
To reposition a toilet, you will need the following tools and materials:
- Adjustable wrench
- Pliers
- Tape measure
- Combination or socket wrench
- Hacksaw
- Bucket
- Plumber’s putty
- Wax ring
- New toilet bolts
- New toilet gasket
- Toilet flange
- Silicone sealant
Steps to reposition a toilet
1. Turn off the water supply to the toilet.
2. Remove the toilet tank.
3. Remove the toilet bowl.
4. Position the new toilet.
5. Connect the water supply to the toilet.
6. Secure the toilet to the floor.
Step 1: Turn off the water supply to the toilet
The first step is to turn off the water supply to the toilet. This can be done by turning the shut-off valve located behind the toilet clockwise. Once the water supply is turned off, you will need to flush the toilet to drain any remaining water.
Step 2: Remove the toilet tank
The next step is to remove the toilet tank. To do this, you will need to remove the two bolts that secure the tank to the bowl. These bolts are typically located on the back of the tank. Once the bolts are removed, you can lift the tank off of the bowl.
Step 3: Remove the toilet bowl
The third step is to remove the toilet bowl. To do this, you will need to remove the two bolts that secure the bowl to the floor. These bolts are typically located on the side of the bowl. Once the bolts are removed, you can lift the bowl off of the floor.
Step 4: Position the new toilet
The fourth step is to position the new toilet. To do this, you will need to place the toilet on the flange and make sure that it is level. You can use a level to check the level of the toilet. Once the toilet is level, you can mark the location of the bolts on the floor.
Step 5: Connect the water supply to the toilet
The fifth step is to connect the water supply to the toilet. To do this, you will need to attach the supply line to the toilet valve. The supply line is typically a flexible hose that connects to the toilet valve and the toilet tank. Once the supply line is attached, you can turn on the water supply to the toilet.
Step 6: Secure the toilet to the floor
The sixth and final step is to secure the toilet to the floor. To do this, you will need to attach the toilet bolts to the flange. The toilet bolts are typically metal screws that are inserted through the holes in the toilet and into the flange. Once the toilet bolts are attached, you can tighten them with a wrench.
Repositioning a toilet is a relatively simple task that can be completed in a few hours. However, it is important to follow the proper steps to ensure that the job is done correctly and safely. By following the steps in this guide, you can reposition your toilet with ease.
3. Troubleshooting
If you are having trouble repositioning your toilet, there are a few things you can check. First, make sure that the toilet is properly aligned. The toilet should be centered on the drain and the bolts should be evenly tightened. If the toilet is not aligned, you can use a level to help you adjust it.
Second, make sure that the toilet is properly secured to the floor. The bolts should be tightened until they are snug, but not so tight that you damage the toilet. If the bolts are loose, you can tighten them with a wrench.
Third, make sure that the toilet is not leaking. If you see water leaking from the toilet, you will need to find and fix the leak. Common causes of leaks include a faulty wax ring, a cracked toilet tank, or a loose water supply line.
If you have tried these troubleshooting steps and you are still having trouble, you may need to call a plumber.
4. Tips and tricks
Here are a few tips and tricks to help you reposition your toilet:
- Use a level to help you align the toilet.
- Tighten the bolts until they are snug, but not so tight that you damage the toilet.
- Use plumber’s putty to seal around the base of the toilet.
- If you are having trouble repositioning the toilet, you can use a piece of wood to wedge it in place.
- If you are replacing an old toilet with a new one, you may need to cut the flange.
- If you are installing a toilet on a concrete floor, you will need to use a wax ring.
Repositioning a toilet is a relatively simple task, but it is important to follow the steps carefully to avoid damaging the toilet or your plumbing. If you are having trouble, you can always call a plumber for help.
How To Reposition A Toilet?
Q: What tools do I need to reposition a toilet?
A: You will need the following tools:
- A plunger
- A hacksaw
- A putty knife
- A level
- A measuring tape
- A pencil
- A screwdriver
- A utility knife
- A bucket
- A pair of gloves
- A mask
- Safety glasses
Q: How do I prepare the toilet for repositioning?
A: Before you can reposition the toilet, you will need to prepare it by:
1. Turning off the water supply to the toilet.
2. Removing the toilet seat.
3. Draining the water from the toilet bowl.
4. Loosening the nuts that connect the toilet to the floor.
5. Lifting the toilet off the floor.
Q: How do I reposition the toilet?
A: To reposition the toilet, you will need to:
1. Choose a new location for the toilet.
2. Mark the location of the toilet on the floor.
3. Dig a hole in the floor that is slightly larger than the base of the toilet.
4. Place the toilet in the hole and level it.
5. Connect the toilet to the water supply and the drain.
6. Secure the toilet to the floor with the nuts that you removed earlier.
Q: How do I finish repositioning the toilet?
A: To finish repositioning the toilet, you will need to:
1. Replace the toilet seat.
2. Turn on the water supply to the toilet.
3. Flush the toilet to check for leaks.
4. Clean up any mess that you made.
Q: What are some common problems that I might encounter when repositioning a toilet?
A: Some common problems that you might encounter when repositioning a toilet include:
- The toilet might not be level.
- The toilet might leak.
- The toilet might not be secure.
Q: How can I troubleshoot these problems?
A: To troubleshoot these problems, you can:
- Make sure that the toilet is level by using a level.
- Check for leaks by turning on the water supply to the toilet and flushing it.
- Tighten the nuts that connect the toilet to the floor to make sure that it is secure.
Q: What are some safety tips that I should keep in mind when repositioning a toilet?
A: Some safety tips that you should keep in mind when repositioning a toilet include:
- Wear gloves and safety glasses to protect your hands and eyes.
- Use a mask to protect your lungs from dust.
- Turn off the power to the toilet before you start working on it.
- Be careful not to drop any tools or materials on your feet.
Repositioning a toilet is a relatively simple task that can be completed in a few hours. However, it is important to follow the proper steps to ensure that the job is done correctly and safely. By following the steps outlined in this article, you can reposition your toilet with ease.
Here are the key takeaways from this article:
- Before you begin, make sure that you have the proper tools and materials.
- Turn off the water supply to the toilet and flush the toilet to drain the water.
- Remove the old toilet by disconnecting the water supply line, the drain line, and the bolts that hold the toilet to the floor.
- Position the new toilet in the desired location and connect the water supply line, the drain line, and the bolts.
- Turn on the water supply to the toilet and flush the toilet to check for leaks.
By following these steps, you can reposition your toilet with ease and confidence.
Author Profile
-
Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.
Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”
Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.
Latest entries
- January 11, 2024Faucet QueriesHow to Replace a Moen Faucet Cartridge in 6 Steps
- January 11, 2024Faucet QueriesHow to Fix a Leaky Shower Faucet in 5 Easy Steps
- January 11, 2024Faucet QueriesHow to Repair a Moen Bathroom Faucet (Step-by-Step Guide)
- January 11, 2024Faucet QueriesHow to Install a Freestanding Tub Faucet on Concrete: A Step-by-Step Guide