How to Replace a Moen Cartridge Bathroom Faucet (Step-by-Step Guide)

Moen Cartridge Bathroom Faucets: A How-To Guide

Moen is a leading manufacturer of bathroom faucets, and their products are known for their quality and durability. If you have a Moen bathroom faucet, you may eventually need to replace the cartridge. This is a relatively simple task that can be completed in just a few minutes.

In this guide, we will walk you through the process of replacing a Moen cartridge bathroom faucet. We will provide step-by-step instructions, along with images to help you visualize the process. By the end of this guide, you will be able to replace your Moen cartridge bathroom faucet with confidence.

So, if your Moen bathroom faucet is leaking or not working properly, read on to learn how to replace the cartridge!

“`html

Step	Instructions	Image
1	Turn off the water supply to the faucet.
2	Remove the handle(s) from the faucet.
3	Remove the old cartridge from the faucet body.
4	Insert the new cartridge into the faucet body.
5	Replace the handle(s) on the faucet.
6	Turn on the water supply to the faucet.

“`

How to Replace a Moen Cartridge Bathroom Faucet

Tools and Materials Needed

• Adjustable wrench
• Flathead screwdriver
• Phillips head screwdriver
• Penetrating oil
• New Moen cartridge
• Replacement O-rings

Steps to Remove the Old Cartridge

1. Turn off the water supply to the faucet. This is usually located under the sink.
2. Remove the escutcheon plate by unscrewing the screws that hold it in place.
3. Locate the cartridge housing. It is usually located behind the handle.
4. Use a flathead screwdriver to pry up the tabs on the cartridge housing.
5. Pull the cartridge housing out of the faucet.
6. Remove the old cartridge by unscrewing it from the faucet body.
7. Apply a small amount of penetrating oil to the threads of the new cartridge.
8. Screw the new cartridge into the faucet body.
9. Replace the cartridge housing and escutcheon plate.
10. Turn on the water supply to the faucet.

Tips for Replacing a Moen Cartridge Bathroom Faucet

• Make sure to turn off the water supply to the faucet before you begin.
• Use a flathead screwdriver to pry up the tabs on the cartridge housing. Do not use a Phillips head screwdriver, as this could damage the housing.
• Be careful not to drop the old cartridge into the sink.
• Apply a small amount of penetrating oil to the threads of the new cartridge. This will help to make it easier to screw into the faucet body.
• Tighten the new cartridge until it is snug, but do not overtighten it.
• Replace the cartridge housing and escutcheon plate.
• Turn on the water supply to the faucet and check for leaks.

Replacing a Moen cartridge bathroom faucet is a relatively simple task that can be completed in about 15 minutes. By following these steps, you can save yourself time and money by doing it yourself.

3. Turn off the water supply to the faucet.

Before you can begin to remove the faucet, you need to turn off the water supply to it. This will prevent any water from escaping and making a mess.

To do this, find the shut-off valve for the faucet. This is usually located near the faucet, but it may be in a different location depending on your plumbing system.

Once you have found the shut-off valve, turn it clockwise to close it. This will stop the water from flowing to the faucet.

4. Remove the escutcheon (the decorative cover around the faucet) by unscrewing it.

The escutcheon is the decorative cover around the faucet. It is usually held in place by screws.

To remove the escutcheon, find the screws that are holding it in place. These screws are usually located on the back of the escutcheon.

Once you have found the screws, use a screwdriver to unscrew them. Be careful not to strip the screws.

Once the screws are removed, the escutcheon should come off easily.

5. Remove the retaining clip.

The retaining clip is a small metal clip that holds the cartridge in place. It is located on the back of the faucet.

To remove the retaining clip, use a small flathead screwdriver to pry it up. Be careful not to damage the faucet.

Once the retaining clip is removed, the cartridge should come out easily.

6. Remove the old cartridge.

The old cartridge is the part of the faucet that controls the flow of water. It is a cylindrical-shaped piece of plastic or metal.

To remove the old cartridge, grasp it firmly and pull it out of the faucet. Be careful not to damage the cartridge.

7. Install the new cartridge.

The new cartridge is a replacement for the old cartridge. It is a cylindrical-shaped piece of plastic or metal.

To install the new cartridge, insert it into the faucet until it is seated properly. Be careful not to damage the cartridge.

8. Replace the retaining clip.

The retaining clip is a small metal clip that holds the cartridge in place. It is located on the back of the faucet.

To replace the retaining clip, use a small flathead screwdriver to push it down until it is seated properly. Be careful not to damage the faucet.

9. Replace the escutcheon.

The escutcheon is the decorative cover around the faucet. It is usually held in place by screws.

To replace the escutcheon, find the screws that are holding it in place. These screws are usually located on the back of the escutcheon.

Once you have found the screws, use a screwdriver to screw them in. Be careful not to strip the screws.

Once the screws are in, the escutcheon should be held in place securely.

10. Turn on the water supply to the faucet.

Once you have replaced the cartridge, you need to turn on the water supply to the faucet. This will allow water to flow through the faucet again.

To do this, find the shut-off valve for the faucet. This is usually located near the faucet, but it may be in a different location depending on your plumbing system.

Once you have found the shut-off valve, turn it counterclockwise to open it. This will allow water to flow to the faucet.

Replacing a Moen cartridge bathroom faucet is a relatively simple task that can be completed in about 30 minutes. By following these steps, you can easily replace your old cartridge with a new one and have your faucet working like new again.

How do I remove the old cartridge?

1. Turn off the water supply to the faucet.
2. Remove the handle by unscrewing the setscrew(s) underneath.
3. Remove the escutcheon (the decorative cover around the base of the faucet) by unscrewing it.
4. Use a basin wrench to loosen the compression nut at the base of the faucet.
5. Pull the old cartridge out of the faucet body.

How do I install the new cartridge?

1. Make sure the new cartridge is the correct size and type for your faucet.
2. Apply a thin coat of plumber’s grease to the O-rings on the new cartridge.
3. Insert the new cartridge into the faucet body.
4. Tighten the compression nut until it is snug.
5. Replace the escutcheon and handle.

What if the water is still leaking after I replace the cartridge?

1. Make sure the cartridge is installed correctly and that the O-rings are in good condition.
2. Check the compression nut to make sure it is tight.
3. If the leak is coming from the faucet spout, you may need to replace the O-ring in the spout.
4. If the leak is coming from the base of the faucet, you may need to replace the faucet seat.

Where can I buy a replacement cartridge for my Moen faucet?

You can purchase a replacement cartridge for your Moen faucet at most hardware stores or online retailers. When you purchase a new cartridge, be sure to specify the model number of your faucet.

How much does it cost to replace a Moen cartridge?

The cost of replacing a Moen cartridge varies depending on the model of your faucet and the cost of the replacement cartridge. Typically, you can expect to pay between $10 and $20 for a replacement cartridge.

Can I replace the cartridge myself?

Yes, you can replace the cartridge in your Moen faucet yourself. However, if you are not comfortable working with plumbing fixtures, you may want to hire a professional plumber to do the job for you.

In this blog post, we have discussed how to replace a Moen cartridge bathroom faucet. We have provided step-by-step instructions, as well as tips and tricks to make the process easier. We hope that this information has been helpful, and that you are now able to replace your Moen cartridge bathroom faucet with confidence.

Here are some key takeaways from this blog post:

• Before you begin, make sure you have the necessary tools and materials.
• Turn off the water supply to the faucet before you start work.
• Remove the old cartridge by unscrewing the retaining nut.
• Clean the faucet body and install the new cartridge.
• Turn on the water supply and test the faucet to make sure it is working properly.

We hope that this blog post has been helpful. If you have any questions, please feel free to leave a comment below.