How to Replace an RV Shower Faucet: A Step-by-Step Guide

AvatarByLiana Farrell Faucet Queries

How to Replace a RV Shower Faucet

RV shower faucets are notorious for breaking down, especially if they’re not properly maintained. If your RV shower faucet is leaking, dripping, or not working at all, it’s time to replace it. Replacing a RV shower faucet is a relatively simple task that can be completed in about an hour. With the right tools and instructions, you can do it yourself and save money on a costly repair.

In this article, we’ll walk you through the steps of replacing a RV shower faucet. We’ll provide detailed instructions and images to help you along the way. So, if you’re ready to take on this DIY project, read on!

Step Instructions Image
1 Turn off the water supply to the faucet.
2 Remove the old faucet by unscrewing the nuts that hold it in place.
3 Install the new faucet by screwing it into place.
4 Turn on the water supply to the faucet and test it to make sure it is working properly.

How To Replace A RV Shower Faucet?

A shower faucet is a critical component of any RV, providing hot and cold water for bathing and other purposes. If your RV shower faucet is leaking, dripping, or not working properly, it’s important to replace it as soon as possible. A leaky faucet can waste water and lead to higher water bills. A broken faucet can also be a safety hazard, as it could allow water to pool on the floor and create a slipping hazard.

Replacing an RV shower faucet is a relatively simple task that can be completed in about an hour. However, it is important to follow the steps carefully to avoid damaging the faucet or the plumbing.

In this guide, we will walk you through the process of replacing an RV shower faucet. We will provide step-by-step instructions and photos to help you complete the job successfully.

Gather Your Tools and Materials

Before you begin, gather the following tools and materials:

  • Replacement shower faucet
  • Adjustable wrench
  • Penetrating oil
  • Pliers
  • Tape measure
  • Combination/socket wrench
  • Screwdriver
  • Tubing cutter
  • Pipe wrench
  • New O-rings and washers

Prepare the Shower Faucet

The first step is to prepare the shower faucet for replacement. This involves turning off the water supply to the shower, draining the water from the showerhead, and removing the old shower faucet.

To turn off the water supply to the shower, locate the shut-off valve. This is usually located near the water heater or water softener. Turn the valve clockwise to turn off the water supply.

To drain the water from the showerhead, remove the showerhead by unscrewing the nuts that hold it in place. Once the showerhead is removed, allow the water to drain out of the showerhead.

To remove the old shower faucet, you will need to unscrew the nuts that hold it in place. These nuts are usually located on the back of the faucet. Use an adjustable wrench to unscrew the nuts. Once the nuts are removed, the old shower faucet can be removed.

Inspect the old shower faucet for any damage or leaks. If the faucet is damaged, you will need to purchase a new faucet that is compatible with your RV.

Install the New Shower Faucet

Now that the old shower faucet has been removed, you can install the new shower faucet. The new shower faucet should come with instructions, but the basic steps are as follows:

1. Apply a small amount of penetrating oil to the threads of the new shower faucet. This will help to prevent the faucet from sticking when you tighten it.
2. Place the new shower faucet in the mounting holes.
3. Tighten the nuts that hold the faucet in place.
4. Reattach the showerhead.
5. Turn on the water supply to the shower and check for leaks.

If there are any leaks, tighten the nuts on the shower faucet until the leaks stop.

Replacing an RV shower faucet is a relatively simple task that can be completed in about an hour. By following the steps in this guide, you can easily replace your old shower faucet with a new one.

Here are some additional tips for replacing an RV shower faucet:

  • Make sure the new shower faucet is compatible with your RV.
  • Use a quality faucet that is made from durable materials.
  • Tighten the nuts on the shower faucet securely to prevent leaks.
  • If you are not comfortable replacing the shower faucet yourself, you can hire a professional to do the job for you.

Replacing an RV shower faucet is a great way to improve the functionality and appearance of your RV. By following the steps in this guide, you can easily replace your old shower faucet with a new one.

3. Install the New Shower Faucet

To install the new shower faucet, you will need:

  • A new shower faucet
  • A wrench
  • Penetrating oil

1. Apply a thin coat of penetrating oil to the threads of the new shower faucet. This will help to prevent the faucet from sticking when you install it.
2. Insert the new shower faucet into the hole in the wall. Make sure that the faucet is aligned correctly.
3. Hand-tighten the nuts that hold the shower faucet in place.
4. Use a wrench to tighten the nuts until they are snug.
5. Turn on the water supply to the shower and check for leaks.

If you have any leaks, tighten the nuts a little more until the leaks stop.

4. Reattach the Showerhead

To reattach the showerhead, you will need:

  • A new showerhead
  • A wrench

1. Attach the showerhead to the new shower faucet.
2. Turn on the water supply to the shower and check for leaks.

If you have any leaks, tighten the showerhead a little more until the leaks stop.

Replacing a RV shower faucet is a relatively simple task that can be completed in a few minutes. By following these steps, you can easily get your RV shower back in working order.

How do I remove the old faucet?

1. Turn off the water supply to the faucet.
2. Remove the screws that hold the faucet to the sink or shower wall.
3. If the faucet has a cartridge, remove it by turning it counterclockwise.
4. If the faucet has a stem, remove it by turning it clockwise.
5. Disconnect the water lines from the faucet.
6. Remove the faucet from the sink or shower wall.

How do I install the new faucet?

1. Align the new faucet with the holes in the sink or shower wall.
2. Secure the faucet to the sink or shower wall with the screws that you removed in Step 2.
3. If the faucet has a cartridge, install it by turning it clockwise.
4. If the faucet has a stem, install it by turning it counterclockwise.
5. Connect the water lines to the faucet.
6. Turn on the water supply to the faucet.

What tools do I need?

You will need the following tools to replace a RV shower faucet:

  • A screwdriver
  • A wrench
  • A pair of pliers
  • A pipe wrench

What is the most common mistake people make when replacing a RV shower faucet?

The most common mistake people make when replacing a RV shower faucet is not turning off the water supply to the faucet before starting the job. This can result in water damage to your RV.

How much does it cost to replace a RV shower faucet?

The cost of replacing a RV shower faucet will vary depending on the type of faucet you choose and the cost of labor. A basic faucet can cost as little as $20, while a more luxurious faucet can cost up to $100. The cost of labor will vary depending on the complexity of the job and the location of the faucet.

Can I replace a RV shower faucet myself?

Yes, you can replace a RV shower faucet yourself. However, it is important to follow the instructions carefully and to make sure that you turn off the water supply to the faucet before starting the job. If you are not comfortable doing this yourself, you can hire a plumber to do the job for you.

Replacing an RV shower faucet is a relatively simple task that can be completed in a few hours. By following the steps in this guide, you can save yourself time and money by doing it yourself.

Here are the key takeaways from this article:

  • Before you begin, make sure you have the right tools and materials.
  • Turn off the water supply to the faucet and drain the water from the lines.
  • Remove the old faucet by unscrewing the nuts that hold it in place.
  • Install the new faucet by following the instructions that came with it.
  • Turn on the water supply and test the faucet to make sure it is working properly.

By following these steps, you can easily replace your RV shower faucet and get back to enjoying your camping adventures.

Author Profile

Liana Farrell
Liana Farrell
Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.

Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”

Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.