How to Replace a Bathtub Shower Faucet (Step-by-Step Guide)

AvatarByLiana Farrell Faucet Queries

How to Replace a Bathtub Shower Faucet

Your bathtub shower faucet is one of the most important fixtures in your bathroom. It’s the part that controls the flow of water to your showerhead, and it can also be used to adjust the temperature of the water. If your faucet is leaking, dripping, or not working properly, it’s important to replace it as soon as possible.

Replacing a bathtub shower faucet is a relatively simple task, but it does require some basic plumbing skills. In this article, we’ll walk you through the process of replacing a bathtub shower faucet, step-by-step. We’ll also provide tips on how to choose the right faucet for your bathroom and how to install it properly.

So, if your bathtub shower faucet is giving you trouble, read on for all the information you need to know about replacing it.

Step Tools Instructions
1. Turn off the water supply to the faucet. – Adjustable wrench – Pliers
2. Remove the old faucet. – Screwdriver – Penetrating oil
3. Install the new faucet. – New faucet – Teflon tape
4. Turn on the water supply to the faucet. – Faucet wrench – Plumber’s putty

A bathtub shower faucet is a critical part of your bathroom, and it’s important to make sure it’s working properly. If your faucet is leaking, dripping, or not turning on or off properly, it’s time to replace it.

Replacing a bathtub shower faucet is a relatively simple task, but it does require some basic plumbing skills. In this guide, we’ll walk you through the process of replacing a bathtub shower faucet, step-by-step.

Tools and Materials

To replace a bathtub shower faucet, you will need the following tools and materials:

  • Replacement faucet
  • Tape measure
  • Combination wrench
  • Pliers
  • Penetrating oil
  • Screwdriver
  • Bucket
  • Gloves
  • Safety glasses

Step-by-step Instructions

1. Turn off the water supply to the faucet. This is usually done by turning off the main water shut-off valve located near the water meter. Once the water is turned off, you can begin the removal process.
2. Remove the old faucet. The first step is to remove the old faucet. To do this, you will need to remove the screws that hold the faucet in place. These screws are typically located on the back of the faucet. Once the screws are removed, you can carefully pry the faucet off of the wall.
3. Install the new faucet. To install the new faucet, you will need to reverse the steps you took to remove the old faucet. First, you will need to attach the new faucet to the wall using the screws that came with the faucet. Once the faucet is securely attached to the wall, you can turn on the water supply and test the faucet to make sure it is working properly.

Replacing a bathtub shower faucet is a relatively simple task, but it does require some basic plumbing skills. By following the steps in this guide, you can easily replace your old faucet with a new one.

Here are some additional tips for replacing a bathtub shower faucet:

  • Be sure to use the correct tools for the job. A good quality combination wrench and pliers will make the job much easier.
  • If you are having trouble removing the old faucet, you can try using penetrating oil to loosen the screws.
  • Be careful not to damage the new faucet when you are installing it.
  • Test the faucet to make sure it is working properly before you turn on the water supply.

How To Replace A Bathtub Shower Faucet?

Replacing a bathtub shower faucet is a relatively simple task that can be completed in about an hour. However, it is important to follow the steps carefully to avoid damaging the faucet or the plumbing.

Tools and Materials

To replace a bathtub shower faucet, you will need the following tools and materials:

  • Adjustable wrench
  • Pliers
  • Tape measure
  • Combination/socket wrench
  • Penetrating oil
  • New faucet
  • New washers and O-rings
  • Plumbing tape
  • Silicone sealant

Step 1: Turn Off the Water Supply

The first step is to turn off the water supply to the faucet. This can usually be done by turning the shut-off valves located behind the faucet. If you are unable to find the shut-off valves, you can turn off the water to the entire house at the main water shut-off valve.

Step 2: Remove the Old Faucet

Once the water supply is turned off, you can begin to remove the old faucet. First, use the adjustable wrench to loosen the nuts that hold the faucet in place. Be careful not to damage the nuts or the faucet body.

Once the nuts are loosened, you can use the pliers to pry the faucet off of the sink. Be careful not to damage the sink.

Step 3: Clean the Faucet Hole

Once the old faucet is removed, you will need to clean the faucet hole. This can be done with a rag and some cleaning solution. Be sure to remove all of the old sealant and debris from the hole.

Step 4: Install the New Faucet

Now it is time to install the new faucet. First, apply a small amount of plumber’s tape to the threads of the new faucet. This will help to create a watertight seal.

Next, insert the new faucet into the faucet hole. Be sure that the faucet is aligned properly.

Once the faucet is in place, you can tighten the nuts that hold it in place. Be careful not to overtighten the nuts, as this could damage the faucet.

Step 5: Install the New Washers and O-rings

Now it is time to install the new washers and O-rings. The washers will help to create a watertight seal between the faucet and the sink. The O-rings will help to prevent leaks.

Step 6: Apply Silicone Sealant

To prevent leaks, you should apply a small amount of silicone sealant around the base of the faucet. This will create a watertight seal between the faucet and the sink.

Step 7: Turn On the Water Supply

Now it is time to turn on the water supply and test the faucet. Be sure to check for leaks. If you find any leaks, you can tighten the nuts or apply more sealant.

Replacing a bathtub shower faucet is a relatively simple task that can be completed in about an hour. By following these steps, you can easily replace your old faucet with a new one.

Here are some additional tips for replacing a bathtub shower faucet:

  • If you are not comfortable working with plumbing, you may want to hire a professional to do the job for you.
  • Be sure to purchase a faucet that is compatible with your sink.
  • Read the instructions carefully before you begin the installation process.
  • Take your time and be careful not to damage the faucet or the plumbing.

By following these tips, you can easily replace your old bathtub shower faucet with a new one.

How do I remove the old faucet?

To remove the old faucet, you will need to:

1. Turn off the water supply to the faucet.
2. Disconnect the hot and cold water lines from the faucet.
3. Remove the screws that hold the faucet to the sink.
4. Pull the faucet straight out of the sink.

How do I install the new faucet?

To install the new faucet, you will need to:

1. Apply a thin coat of plumber’s putty to the threads of the new faucet.
2. Insert the faucet into the sink and tighten the screws.
3. Connect the hot and cold water lines to the faucet.
4. Turn on the water supply to the faucet and test it for leaks.

What tools do I need?

To replace a bathtub shower faucet, you will need the following tools:

  • A screwdriver
  • A wrench
  • A pair of pliers
  • A plumber’s putty

How much does it cost to replace a bathtub shower faucet?

The cost of replacing a bathtub shower faucet will vary depending on the type of faucet you choose. A basic faucet can cost as little as $50, while a more luxurious faucet can cost upwards of $500.

How long does it take to replace a bathtub shower faucet?

Replacing a bathtub shower faucet can take anywhere from 30 minutes to an hour, depending on the type of faucet you choose and your level of experience.

What is the best type of faucet for a bathtub shower?

The best type of faucet for a bathtub shower will depend on your personal preferences and budget. Some of the most popular types of faucets for bathtub showers include:

  • Single-handle faucets
  • Two-handle faucets
  • Touchless faucets
  • Thermostatic faucets

How do I maintain my bathtub shower faucet?

To maintain your bathtub shower faucet, you should:

  • Clean the faucet regularly with a mild soap and water solution.
  • Lubricate the faucet with a silicone-based lubricant every few months.
  • Replace the O-rings and washers on the faucet every few years.

By following these tips, you can help to extend the life of your bathtub shower faucet.

Replacing a bathtub shower faucet is a relatively simple task that can be completed in a few hours. However, it is important to follow the steps carefully and to use the proper tools. By following the steps outlined in this guide, you can easily replace your bathtub shower faucet and have a working shower again in no time.

Here are the key takeaways from this guide:

  • Before you begin, turn off the water supply to the faucet.
  • Remove the old faucet by unscrewing the nuts that hold it in place.
  • Install the new faucet by following the manufacturer’s instructions.
  • Turn on the water supply to the faucet and test it to make sure it is working properly.

By following these steps, you can easily replace your bathtub shower faucet and have a working shower again in no time.

Author Profile

Liana Farrell
Liana Farrell
Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.

Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”

Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.