How to Remove a Toilet Paper Holder (The Easy Way)

AvatarByLiana Farrell Toilet Queries

How to Remove a Toilet Paper Holder

Your toilet paper holder is a convenient way to keep your bathroom stocked with toilet paper, but it can also be a pain to remove if you need to replace it or clean behind it. In this article, we’ll show you how to remove a toilet paper holder quickly and easily, so you can get back to using your bathroom in no time.

We’ll cover everything you need to know, from identifying the type of toilet paper holder you have to removing it without damaging your toilet. So whether you’re a DIY novice or a seasoned pro, read on for all the information you need to know!

Step Instructions Image
1 Locate the screws that hold the toilet paper holder in place. They are typically located on the back of the holder, near the top.
2 Use a screwdriver to unscrew the screws.
3 Gently pull the toilet paper holder away from the wall.
4 Replace the toilet paper holder with a new one.

Tools and Materials Needed

To remove a toilet roll holder, you will need the following tools and materials:

  • A Phillips head screwdriver
  • A flat head screwdriver
  • A utility knife
  • A pair of pliers
  • A rag
  • A bucket

Step-by-Step Instructions

1. Turn off the water supply to the toilet. This will prevent any water from spilling out when you remove the toilet roll holder.
2. Locate the screws that hold the toilet roll holder in place. These screws are typically located on the back of the toilet roll holder.
3. Use a Phillips head screwdriver to loosen the screws. Be careful not to strip the screws.
4. Once the screws are loosened, use a flat head screwdriver to pry the toilet roll holder away from the wall. You may need to use a utility knife to cut through any sealant that is holding the toilet roll holder in place.
5. Use a rag to clean up any water or debris that may have spilled.
6. Turn the water supply back on to the toilet.

Removing a toilet roll holder is a relatively simple task that can be completed in a few minutes. By following these steps, you can easily remove your toilet roll holder and replace it with a new one.

How To Remove Toilet Roll Holder?

Toilet roll holders are a convenient way to keep your bathroom stocked with toilet paper, but they can also be a pain to remove if you need to replace them or clean behind them. If you’re not sure how to remove your toilet roll holder, don’t worrywe’re here to help.

In this guide, we’ll walk you through the steps of removing a toilet roll holder, whether it’s mounted to the wall or the tank. We’ll also provide tips on how to troubleshoot any problems you might encounter.

Step 1: Gather Your Materials

Before you start removing your toilet roll holder, you’ll need to gather a few materials. These include:

  • A screwdriver
  • A pair of pliers
  • A rag or towel
  • A bucket of water

Step 2: Identify the Type of Toilet Roll Holder

There are two main types of toilet roll holders: wall-mounted and tank-mounted. Wall-mounted toilet roll holders are attached to the wall with screws or nails, while tank-mounted toilet roll holders are attached to the back of the toilet tank.

To identify the type of toilet roll holder you have, look for the following:

  • If the toilet roll holder is attached to the wall, it is a wall-mounted toilet roll holder.
  • If the toilet roll holder is attached to the back of the toilet tank, it is a tank-mounted toilet roll holder.

Step 3: Remove the Toilet Roll Holder

Once you have identified the type of toilet roll holder you have, you can begin removing it.

To remove a wall-mounted toilet roll holder:

1. Use a screwdriver to unscrew the screws or nails that are holding the toilet roll holder to the wall.
2. If the toilet roll holder is stuck, you can use a pair of pliers to pry it loose.
3. Wipe down the area where the toilet roll holder was attached with a rag or towel.

To remove a tank-mounted toilet roll holder:

1. Open the lid of the toilet tank.
2. Locate the two bolts that are holding the toilet roll holder to the back of the tank.
3. Use a screwdriver to loosen the bolts.
4. If the toilet roll holder is stuck, you can use a pair of pliers to pry it loose.
5. Close the lid of the toilet tank.

Troubleshooting

If you’re having trouble removing your toilet roll holder, here are a few troubleshooting tips:

  • Make sure you have the right tools. If you’re trying to remove a wall-mounted toilet roll holder, you’ll need a screwdriver. If you’re trying to remove a tank-mounted toilet roll holder, you’ll need a screwdriver and a pair of pliers.
  • Be patient. It may take a few minutes to remove the toilet roll holder, especially if it’s been in place for a long time.
  • If you’re still having trouble, you can call a plumber for help.

Tips and Tricks

Here are a few tips and tricks for removing a toilet roll holder:

  • If the toilet roll holder is stuck, you can try heating it up with a hair dryer. This will loosen the adhesive and make it easier to remove.
  • If the toilet roll holder is made of plastic, you can try using a lubricant, such as WD-40, to help loosen it.
  • If you’re removing a tank-mounted toilet roll holder, you can try removing the tank lid first. This will give you more access to the bolts that are holding the toilet roll holder in place.

Removing a toilet roll holder is a relatively simple task, but it can be a little tricky if you don’t know what you’re doing. By following the steps in this guide, you should be able to remove your toilet roll holder without any problems.

How do I remove a toilet roll holder from a wall?

1. Locate the screws that hold the toilet roll holder in place. They are typically located on the back of the holder, near the top and bottom.
2. Use a screwdriver to loosen the screws. Be careful not to damage the wall.
3. Once the screws are loosened, carefully pull the toilet roll holder away from the wall.

What if the screws are rusted or stripped?

If the screws are rusted or stripped, you may need to use a different method to remove the toilet roll holder. Here are a few options:

  • Use a hacksaw to cut the screws off.
  • Use a drill to remove the screws.
  • Use a pry bar to pry the toilet roll holder away from the wall.

How do I remove a toilet roll holder from a ceramic tile wall?

Removing a toilet roll holder from a ceramic tile wall is a bit more difficult than removing it from a drywall wall. Here are the steps involved:

1. Locate the screws that hold the toilet roll holder in place. They are typically located on the back of the holder, near the top and bottom.
2. Use a screwdriver to loosen the screws. Be careful not to damage the tile.
3. Once the screws are loosened, carefully pry the toilet roll holder away from the wall. Use a putty knife or other blunt object to gently work the holder loose.
4. Fill the holes in the wall with a suitable filler. Allow the filler to dry completely before replacing the toilet roll holder.

What if I don’t want to damage the wall?

If you don’t want to damage the wall, you can try using a suction cup to remove the toilet roll holder. Here’s how:

1. Place the suction cup on the back of the toilet roll holder. Make sure that the suction cup is securely attached.
2. Pull up on the suction cup until the toilet roll holder comes loose. Be careful not to damage the wall.
3. Once the toilet roll holder is loose, remove the suction cup and discard it.

What if the toilet roll holder is stuck?

If the toilet roll holder is stuck, you may need to use a bit of force to remove it. Here are a few tips:

  • Use a rubber mallet to tap on the sides of the toilet roll holder. This may help to loosen it.
  • Use a hair dryer to heat up the toilet roll holder. This may make it easier to remove.
  • Use a lubricant, such as WD-40, to loosen the toilet roll holder.

How do I prevent a toilet roll holder from coming loose?

To prevent a toilet roll holder from coming loose, you can take a few steps:

  • Use screws that are long enough to go through the wall and into the stud.
  • Use a sealant around the screws to prevent them from coming loose.
  • Tighten the screws securely.
  • Avoid using excessive force when removing the toilet roll holder.

    In this blog post, we have discussed how to remove a toilet roll holder. We have covered the different types of toilet roll holders and the steps involved in removing each type. We have also provided tips on how to prevent toilet roll holders from becoming stuck in the first place.

We hope that this blog post has been helpful and that you are now able to remove your toilet roll holder with ease. If you have any questions or need further assistance, please do not hesitate to contact us.

Author Profile

Liana Farrell
Liana Farrell
Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.

Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”

Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.