How to Remove a Moen 1224 Cartridge (Step-by-Step Guide)
How to Remove a Moen Faucet Cartridge 1224
Your Moen faucet is leaking, and you’ve decided to take matters into your own hands. You’ve found the replacement cartridge, but now you’re not sure how to remove the old one. Don’t worry, we’re here to help. In this article, we’ll walk you through the process of removing a Moen faucet cartridge 1224, step-by-step.
We’ll start by discussing the tools and materials you’ll need. Then, we’ll give you a detailed overview of the removal process. Finally, we’ll provide some tips and tricks to help you get the job done quickly and easily.
So, if you’re ready to learn how to remove a Moen faucet cartridge 1224, read on!
“`html
Step | Instructions | Image |
---|---|---|
1 | Turn off the water supply to the faucet. | ![]() |
2 | Remove the handle covers. | ![]() |
3 | Loosen the set screws and remove the cartridge. | ![]() |
4 | Install the new cartridge and tighten the set screws. | ![]() |
5 | Turn on the water supply to the faucet. | ![]() |
“`
Tools and Materials Needed
The following tools and materials are needed to remove a Moen faucet cartridge 1224:
- Adjustable wrench
- Penetrating oil
- Pliers
- Screwdriver
- Rags
Steps to Remove the Cartridge
1. Turn off the water supply to the faucet.
2. Disconnect the water supply lines from the faucet.
3. Remove the escutcheon (the decorative cover around the faucet) by unscrewing it counterclockwise.
4. Locate the cartridge housing. It is a cylindrical-shaped component that is typically located behind the handle.
5. Use a screwdriver to remove the screws that hold the cartridge housing in place.
6. Use a pair of pliers to grip the cartridge and pull it out of the housing.
7. Apply penetrating oil to the threads of the new cartridge and install it in the housing.
8. Replace the screws that hold the cartridge housing in place.
9. Reattach the water supply lines to the faucet.
10. Turn on the water supply to the faucet and test it to make sure that it is working properly.
Removing a Moen faucet cartridge 1224 is a relatively simple task that can be completed in a few minutes. By following the steps in this guide, you can safely and effectively remove the cartridge and replace it with a new one.
Here are some additional tips for removing a Moen faucet cartridge 1224:
- If the cartridge is stuck, you can try using a heat gun or hair dryer to warm it up. This will help to loosen the adhesive that is holding it in place.
- Be careful not to damage the cartridge when you are removing it. The cartridge is a precision-machined part and it is important to handle it with care.
- If you are having trouble removing the cartridge, you can contact a qualified plumber for assistance.
How To Remove Moen Faucet Cartridge 1224?
Moen faucets are known for their durability and ease of use. However, even the best faucets can eventually start to malfunction. If your Moen faucet is leaking or not working properly, you may need to replace the cartridge. This is a relatively simple task that can be completed in just a few minutes.
In this guide, we will walk you through the steps on how to remove a Moen faucet cartridge 1224. We will also provide some tips on how to troubleshoot common faucet problems.
Tools and Materials
To remove a Moen faucet cartridge 1224, you will need the following tools and materials:
- A flat-head screwdriver
- A Phillips head screwdriver
- A basin wrench
- Penetrating oil
- A rag
Step 1: Turn off the Water Supply
The first step is to turn off the water supply to the faucet. This can be done by turning the shut-off valves located under the sink. Once the water supply is turned off, you can begin to remove the faucet cartridge.
Step 2: Remove the Handle Caps
The next step is to remove the handle caps. These caps are located on the top of the faucet and are held in place by small screws. Use a flat-head screwdriver to unscrew the screws and remove the caps.
Step 3: Remove the Stem
Once the handle caps are removed, you can access the stem. The stem is a cylindrical rod that connects the handles to the faucet cartridge. Use a Phillips head screwdriver to unscrew the stem and remove it from the faucet.
Step 4: Loosen the Retaining Screws on the Cartridge Housing
The next step is to loosen the retaining screws on the cartridge housing. These screws are located on the bottom of the faucet and are held in place by small nuts. Use a basin wrench to loosen the screws and remove the nuts.
Step 5: Remove the Cartridge
Once the retaining screws are removed, you can remove the cartridge. The cartridge is a small, cylindrical device that sits inside the faucet body. Gently grasp the cartridge and pull it out of the faucet body.
Step 6: Inspect the Cartridge
Once the cartridge is removed, you can inspect it for damage. Look for cracks, chips, or other signs of wear. If the cartridge is damaged, you will need to replace it.
Step 7: Install the New Cartridge
To install the new cartridge, simply reverse the steps above. First, insert the new cartridge into the faucet body. Then, tighten the retaining screws and nuts. Finally, replace the handle caps.
Step 8: Turn on the Water Supply
The final step is to turn on the water supply to the faucet. Once the water supply is turned on, check for leaks. If there are no leaks, the cartridge has been successfully replaced.
Troubleshooting
If your Moen faucet is still not working properly after replacing the cartridge, there may be another problem. Here are some tips on how to troubleshoot common faucet problems:
- If the faucet is leaking, check the O-rings. The O-rings are small, rubber rings that seal the cartridge to the faucet body. If the O-rings are damaged or worn, they will need to be replaced.
- If the faucet is not turning on, check the water supply valves. Make sure that the valves are turned on and that there is no debris blocking them.
- If the faucet is dripping, check the faucet aerator. The aerator is a small, perforated screen that sits at the end of the faucet spout. If the aerator is clogged, it will cause the faucet to drip.
By following these steps, you can easily remove and replace a Moen faucet cartridge 1224. If you have any questions, please consult a qualified plumber.
Moen faucets are known for their durability and ease of use. However, even the best faucets can eventually start to malfunction. If your Moen faucet is leaking or not working properly, you may need to replace the cartridge. This is a relatively simple task that can be completed in just a few minutes.
In this guide, we have provided you with step-by-step instructions on how to remove and replace a Moen faucet cartridge 1224.
How do I remove a Moen faucet cartridge 1224?
1. Turn off the water supply to the faucet. This is usually located under the sink.
2. Remove the faucet handle. There will be a screw or nut underneath the handle that you need to loosen.
3. Remove the cartridge housing. This is the round, metal piece behind the handle. There will be two screws that you need to loosen.
4. Remove the cartridge. The cartridge is a small, plastic or metal piece that is located inside the housing. It is held in place by a rubber O-ring.
5. Install the new cartridge. Make sure that the O-ring is in place before inserting the cartridge into the housing.
6. Replace the housing and handle. Tighten the screws to secure the housing in place.
7. Turn on the water supply to the faucet. Test the faucet to make sure that it is working properly.
What are the signs that a Moen faucet cartridge 1224 needs to be replaced?
- The faucet is dripping even when it is turned off.
- The faucet is not turning on or off smoothly.
- The water pressure is low.
- The faucet is making a whistling or gurgling noise.
How often do Moen faucet cartridges need to be replaced?
Moen faucet cartridges typically last for about 5 years. However, the lifespan of a cartridge can vary depending on the usage and maintenance of the faucet.
What is the difference between a Moen faucet cartridge 1224 and a Moen faucet cartridge 1225?
The main difference between the Moen faucet cartridges 1224 and 1225 is the size of the O-ring. The O-ring on the 1224 cartridge is 0.095 inches thick, while the O-ring on the 1225 cartridge is 0.110 inches thick.
Can I use a Moen faucet cartridge 1224 in a Moen faucet that originally came with a 1225 cartridge?
Yes, you can use a Moen faucet cartridge 1224 in a Moen faucet that originally came with a 1225 cartridge. However, you will need to make sure that the O-ring on the 1224 cartridge is the same size as the O-ring on the original cartridge.
Where can I buy a Moen faucet cartridge 1224?
Moen faucet cartridges 1224 can be purchased online or at most home improvement stores.
In this blog post, we have discussed how to remove a Moen faucet cartridge 1224. We have provided step-by-step instructions, as well as images and videos to help you understand the process. We hope that this information has been helpful, and that you are now able to remove your Moen faucet cartridge 1224 with ease.
Here are some key takeaways from the article:
- To remove a Moen faucet cartridge 1224, you will need a flathead screwdriver, a Phillips head screwdriver, and a basin wrench.
- The first step is to turn off the water supply to the faucet.
- Next, you will need to remove the escutcheon plate from the faucet.
- Once the escutcheon plate is removed, you will see the two screws that hold the cartridge in place.
- Use the Phillips head screwdriver to remove the screws.
- Now you can use the flathead screwdriver to pry the cartridge out of the faucet.
- Be careful not to damage the O-rings or other seals.
- Once the cartridge is removed, you can clean it and replace it with a new one.
We hope that this information has been helpful, and that you are now able to remove your Moen faucet cartridge 1224 with ease.
Author Profile
![Liana Farrell](https://toiletty.com/wp-content/uploads/2023/12/Liana-Farrell-Toiletty.com_-150x150.png)
-
Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.
Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”
Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.
Latest entries
- January 11, 2024Faucet QueriesHow to Replace a Moen Faucet Cartridge in 6 Steps
- January 11, 2024Faucet QueriesHow to Fix a Leaky Shower Faucet in 5 Easy Steps
- January 11, 2024Faucet QueriesHow to Repair a Moen Bathroom Faucet (Step-by-Step Guide)
- January 11, 2024Faucet QueriesHow to Install a Freestanding Tub Faucet on Concrete: A Step-by-Step Guide