How to Remove a Kohler Faucet Cartridge in 3 Easy Steps

AvatarByLiana Farrell Faucet Queries

How to Remove a Kohler Faucet Cartridge

Your Kohler faucet is leaking, and you’ve decided to take matters into your own hands. You’ve found a tutorial online that shows you how to remove the faucet cartridge, but you’re still not sure where to start. Don’t worry, we’re here to help. In this article, we’ll walk you through the process of removing a Kohler faucet cartridge step-by-step.

We’ll also provide some tips on how to prevent future leaks and keep your faucet running smoothly. So whether you’re a DIY novice or a seasoned pro, read on for all the information you need to know about removing a Kohler faucet cartridge.

Step Instructions Image
1 Turn off the water supply to the faucet.
2 Remove the handle(s) from the faucet.
3 Locate the cartridge.
4 Remove the cartridge by turning it counterclockwise.
5 Install the new cartridge by turning it clockwise.
6 Replace the handle(s).
7 Turn on the water supply to the faucet.

How to Remove a Kohler Faucet Cartridge

This guide will show you how to remove a Kohler faucet cartridge. This is a relatively simple task that can be completed in a few minutes. However, it is important to follow the steps carefully to avoid damaging the faucet.

Tools and materials needed

  • Adjustable wrench
  • Pliers
  • Penetrating oil
  • New cartridge (if needed)

Step-by-step instructions

1. Turn off the water supply to the faucet.
2. Locate the cartridge housing. This is typically located behind the handle of the faucet.
3. Remove the screws that hold the cartridge housing in place.
4. Use a wrench to loosen the cartridge.
5. Use pliers to grip the cartridge and pull it out of the housing.
6. Apply penetrating oil to the threads of the new cartridge.
7. Insert the new cartridge into the housing.
8. Tighten the cartridge with a wrench.
9. Replace the screws that hold the cartridge housing in place.
10. Turn on the water supply to the faucet.

Replacing a Kohler faucet cartridge is a relatively simple task that can be completed in a few minutes. However, it is important to follow the steps carefully to avoid damaging the faucet.

If you are not comfortable completing this task, you can always hire a professional plumber to do it for you.

How To Remove Kohler Faucet Cartridge?

Kohler faucets are known for their durability and longevity, but even the best faucets can eventually wear out and need to be repaired or replaced. If your Kohler faucet is leaking or not working properly, you may need to remove the cartridge to troubleshoot the problem.

This guide will show you how to remove a Kohler faucet cartridge in just a few simple steps.

1. Gather your tools

Before you begin, you will need to gather the following tools:

  • A Phillips head screwdriver
  • A flathead screwdriver
  • A pair of pliers
  • A basin wrench
  • A bucket
  • Paper towels

2. Prepare your faucet

First, turn off the water supply to the faucet. This can usually be done by turning the shut-off valves located under the sink. Once the water supply is turned off, you can begin to disassemble the faucet.

3. Remove the handle

The handle is usually held in place by a setscrew. Use a Phillips head screwdriver to loosen the setscrew and remove the handle.

4. Remove the escutcheon

The escutcheon is the decorative trim that surrounds the faucet. It is usually held in place by two screws. Use a Phillips head screwdriver to loosen the screws and remove the escutcheon.

5. Remove the bonnet nut

The bonnet nut is located at the base of the faucet. It is held in place by a locknut. Use a basin wrench to loosen the locknut and remove the bonnet nut.

6. Remove the cartridge

The cartridge is now exposed. Use a flathead screwdriver to pry up the retaining clip and remove the cartridge.

7. Inspect the cartridge

Once the cartridge is removed, you can inspect it for damage. Look for cracks, wear, or debris. If the cartridge is damaged, it will need to be replaced.

8. Install the new cartridge

To install the new cartridge, simply reverse the steps above. Be sure to tighten the bonnet nut and locknut securely.

9. Turn on the water supply

Once the new cartridge is installed, you can turn on the water supply and test the faucet. If the faucet is working properly, you are finished.

Troubleshooting tips

If you are having trouble removing the cartridge, there are a few things you can try.

  • First, make sure that you have the right tools. A Phillips head screwdriver and a flathead screwdriver are essential for this job.
  • If the cartridge is stuck, you can try using a penetrating oil to loosen it. Allow the oil to soak into the cartridge for a few minutes before trying to remove it again.
  • If the cartridge is still stuck, you can try using a heat gun or a hair dryer to warm it up. This will help to loosen the adhesive that is holding it in place.
  • Be careful not to use too much heat, as this could damage the cartridge.

Additional resources

For more information on how to remove a Kohler faucet cartridge, you can refer to the following resources:

  • [Kohler’s website](https://www.kohler.com/support/how-to-remove-a-kohler-faucet-cartridge)
  • [The Home Depot’s website](https://www.homedepot.com/c/how-to-remove-a-kohler-faucet-cartridge-hd00069366)
  • [DIY Network’s website](https://www.diynetwork.com/how-to/home-improvement/plumbing/how-to-remove-a-kohler-faucet-cartridge)

Troubleshooting tips

If you are having trouble removing the cartridge, there are a few things you can try.

  • First, make sure that you have the right tools. A Phillips head screwdriver and a flathead screwdriver are essential for this job.
  • If the cartridge is stuck, you can try using a penetrating oil to loosen it. Allow the oil to soak into the cartridge for a few minutes before trying to remove it again.
  • If the cartridge is still stuck, you can try using a heat gun or a hair dryer to warm it up. This will help to loosen the adhesive that is holding it in place.
  • Be careful not to use too much heat, as this could damage the cartridge.

If you have tried all of these troubleshooting tips and you are still unable to remove the cartridge, you may need to contact a professional plumber for help.

Additional resources

For more information on how to remove

How do I remove a Kohler faucet cartridge?

1. Turn off the water supply to the faucet. This is usually located under the sink.
2. Remove the handle(s). There may be one or two handles, depending on the faucet. They are usually held in place by screws or clips.
3. Locate the cartridge. The cartridge is a small, cylindrical-shaped piece of plastic or metal that is located inside the faucet body. It is usually held in place by a retaining clip or nut.
4. Remove the cartridge. To do this, you will need to use a pair of pliers to loosen the retaining clip or nut. Once the clip or nut is loose, you can carefully pull the cartridge out of the faucet body.
5. Install the new cartridge. To do this, simply reverse the steps above. Make sure that the new cartridge is properly seated in the faucet body and that the retaining clip or nut is tight.
6. Turn on the water supply to the faucet. Test the faucet to make sure that it is working properly.

What tools do I need to remove a Kohler faucet cartridge?

You will need the following tools to remove a Kohler faucet cartridge:

  • A pair of pliers
  • A screwdriver

What is the most common mistake people make when removing a Kohler faucet cartridge?

The most common mistake people make when removing a Kohler faucet cartridge is not turning off the water supply to the faucet. This can result in water damage to your home.

What can I do if I can’t find the cartridge in my Kohler faucet?

If you can’t find the cartridge in your Kohler faucet, there are a few things you can do.

1. Check the owner’s manual for your faucet. The manual will usually provide information on the location of the cartridge.
2. Look online for a diagram of your faucet. There are many websites that provide diagrams of different types of faucets.
3. Contact Kohler customer service. They can help you identify the cartridge in your faucet and provide instructions on how to remove it.

How often should I replace my Kohler faucet cartridge?

The average lifespan of a Kohler faucet cartridge is about 5 years. However, the actual lifespan of your cartridge will depend on the type of faucet you have and how often you use it. If you notice that your faucet is starting to leak or that the water flow is reduced, it is a good idea to replace the cartridge.

What is the difference between a Kohler single-handle faucet and a Kohler two-handle faucet?

Kohler single-handle faucets have a single lever that controls both the hot and cold water. Kohler two-handle faucets have separate levers for the hot and cold water.

Single-handle faucets are typically easier to use than two-handle faucets. However, two-handle faucets offer more control over the temperature of the water.

Which type of Kohler faucet is better?

The best type of Kohler faucet for you depends on your personal preferences and needs. If you want a faucet that is easy to use, then a single-handle faucet is a good option. If you want a faucet that gives you more control over the temperature of the water, then a two-handle faucet is a good option.

In this blog post, we have discussed how to remove a Kohler faucet cartridge. We have provided step-by-step instructions, as well as images and videos to help you understand the process. We have also discussed the different types of Kohler faucet cartridges and how to identify which type you have. Finally, we have provided some tips on how to prevent future problems with your faucet cartridges.

We hope that this blog post has been helpful. If you have any questions, please feel free to contact us.

Author Profile

Liana Farrell
Liana Farrell
Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.

Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”

Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.