How to Remove a Kohler Bathroom Faucet Handle in 5 Easy Steps

How to Remove a Kohler Bathroom Faucet Handle

Your Kohler bathroom faucet is looking a little worse for wear, and you’re ready to give it a fresh new look. But before you can install a new faucet, you need to remove the old one. And that’s where this guide comes in.

In this article, we’ll walk you through the steps of removing a Kohler bathroom faucet handle, step-by-step. We’ll also provide some tips and tricks to make the process easier. So if you’re ready to get started, read on!

What You’ll Need

Before you begin, gather the following materials:

• A Phillips head screwdriver
• A flathead screwdriver
• A basin wrench
• Penetrating oil
• Rags

Steps

1. Turn off the water supply to the faucet.
2. Remove the decorative cap from the handle. This is usually held in place by a small screw.
3. Use the Phillips head screwdriver to remove the screws that hold the handle in place.
4. Use the flathead screwdriver to pry the handle off of the faucet stem.
5. If the handle is stuck, apply a few drops of penetrating oil to the threads and let it sit for a few minutes. Then try prying the handle off again.
6. Use the basin wrench to loosen the nuts that hold the faucet stem in place.
7. Remove the faucet stem from the faucet body.
8. Clean the faucet body and install the new faucet handle.
9. Turn on the water supply to the faucet and test it to make sure it’s working properly.

That’s it! You’ve now successfully removed and replaced a Kohler bathroom faucet handle.

Step	Instructions	Image
1	Turn off the water supply to the faucet.
2	Locate the screws that hold the handle in place.
3	Use a screwdriver to loosen the screws and remove the handle.
4	Clean the faucet stem and seat.
5	Replace the handle with a new one.

How to Remove a Kohler Bathroom Faucet Handle

Tools and Materials Needed

To remove a Kohler bathroom faucet handle, you will need the following tools and materials:

• A Phillips head screwdriver
• A flathead screwdriver
• A pair of pliers
• A rag or towel

Step-by-Step Instructions

1. Turn off the water supply to the faucet. This can usually be done by turning the shut-off valves located under the sink.
2. Remove the decorative cap from the top of the faucet handle. This cap is typically held in place by a small Phillips head screw.
3. Use a flathead screwdriver to pry off the decorative cap. Be careful not to damage the faucet.
4. Locate the setscrews that hold the faucet handle in place. These setscrews are typically located on the underside of the handle.
5. Use a Phillips head screwdriver to loosen the setscrews.
6. Gently pull the faucet handle off of the faucet.
7. If the faucet handle is stuck, you can use a pair of pliers to grip the handle and gently twist it off.
8. Wipe down the faucet with a rag or towel to clean any dirt or debris.

Removing a Kohler bathroom faucet handle is a relatively simple task that can be completed in a few minutes. By following these steps, you can easily remove the faucet handle and replace it with a new one.

Here are some additional tips for removing a Kohler bathroom faucet handle:

• If the setscrews are difficult to reach, you can use a long screwdriver or a magnet to help you turn them.
• If the faucet handle is still stuck after you have loosened the setscrews, you can try applying a little bit of heat to the handle. This will help to loosen the adhesive that is holding the handle in place.
• Be careful not to damage the faucet when you are removing the handle. If you are unsure how to remove the handle, it is best to consult a professional plumber.

How to Remove a Kohler Bathroom Faucet Handle

Kohler bathroom faucet handles are typically held in place by a set screw or a clip. To remove the handle, you will need to locate the set screw or clip and use a screwdriver to loosen it. Once the set screw or clip is loosened, you can then pull the handle straight off of the faucet.

Step 1: Locate the Set Screw or Clip

The first step is to locate the set screw or clip that is holding the handle in place. This is usually located on the back of the handle, near the base. The set screw will be a small, Phillips head screw, and the clip will be a small, metal piece that is attached to the handle.

Step 2: Loosen the Set Screw or Clip

Once you have located the set screw or clip, use a screwdriver to loosen it. Turn the screwdriver counterclockwise to loosen the set screw, and turn it clockwise to loosen the clip.

Step 3: Pull the Handle Straight Off

Once the set screw or clip is loosened, you can then pull the handle straight off of the faucet. Be careful not to damage the handle or the faucet.

Step 4: Replace the Handle

To replace the handle, simply reverse the steps above. First, attach the new handle to the faucet, then tighten the set screw or clip.

Troubleshooting Tips

If you are having trouble removing the handle, there are a few things you can check. First, make sure that you are using the correct screwdriver for the set screw or clip. Second, make sure that you are turning the screwdriver in the correct direction. Third, try applying a little bit of lubricant to the set screw or clip to help loosen it.

Additional Resources

For more information on how to remove a Kohler bathroom faucet handle, you can refer to the following resources:

• [Kohler Bathroom Faucet Handle Removal Instructions](https://www.kohler.com/support/articles/bathroom-faucets/how-to-remove-a-kohler-bathroom-faucet-handle)
• [DIY Plumbing: How to Remove a Bathroom Faucet Handle](https://www.diynetwork.com/how-to/plumbing/bathroom-faucets/how-to-remove-a-bathroom-faucet-handle)
• [Home Depot: How to Remove a Bathroom Faucet Handle](https://www.homedepot.com/c/ah/how-to-remove-a-bathroom-faucet-handle/93305754)

Troubleshooting Tips

If you are having trouble removing the handle, there are a few things you can check. First, make sure that you are using the correct screwdriver for the set screw or clip. Second, make sure that you are turning the screwdriver in the correct direction. Third, try applying a little bit of lubricant to the set screw or clip to help loosen it.

If you have tried all of these things and you are still having trouble, you may need to contact a professional plumber for help.

Additional Resources

For more information on how to remove a Kohler bathroom faucet handle, you can refer to the following resources:

• [Kohler Bathroom Faucet Handle Removal Instructions](https://www.kohler.com/support/articles/bathroom-faucets/how-to-remove-a-kohler-bathroom-faucet-handle)
• [DIY Plumbing: How to Remove a Bathroom Faucet Handle](https://www.diynetwork.com/how-to/plumbing/bathroom-faucets/how-to-remove-a-bathroom-faucet-handle)
• [Home Depot: How to Remove a Bathroom Faucet Handle](https://www.homedepot.com/c/ah/how-to-remove-a-bathroom-faucet-handle/93305754)

  How do I remove a Kohler bathroom faucet handle?

1. Turn off the water supply to the faucet. This is usually located under the sink.
2. Use a Phillips head screwdriver to remove the screws that hold the handle in place. There will be one screw on each side of the handle.
3. Gently pry the handle off of the faucet. You may need to use a flathead screwdriver to help pry it loose.
4. Replace the old handle with a new one. Make sure that the new handle is the same size and style as the old one.
5. Turn on the water supply to the faucet and test it to make sure that it is working properly.

In this tutorial, we have shown you how to remove a Kohler bathroom faucet handle. We hope that you found this information helpful. If you have any questions or comments, please feel free to leave them below.

Here are the key takeaways from this tutorial:

• To remove a Kohler bathroom faucet handle, you will need a flathead screwdriver and a Phillips head screwdriver.
• The first step is to turn off the water supply to the faucet.
• Next, use the flathead screwdriver to pry off the decorative cap that covers the screw holding the handle in place.
• Once the cap is removed, you can use the Phillips head screwdriver to unscrew the screw holding the handle in place.
• Finally, you can lift the handle off of the faucet.

We hope that this tutorial has helped you to learn how to remove a Kohler bathroom faucet handle. If you have any questions or comments, please feel free to leave them below.