How to Remove a Bathroom Faucet Handle (The Easy Way)

AvatarByLiana Farrell Faucet Queries

How to Remove a Bathroom Faucet Handle

Your bathroom faucet is one of the most used fixtures in your home, so it’s important to keep it in good working order. But what do you do if the handle starts to come loose or break? Or if you just want to give your faucet a fresh new look?

In this article, we’ll show you how to remove a bathroom faucet handle in just a few simple steps. We’ll also provide some tips on how to choose the right replacement handle for your faucet.

So whether you’re a DIY novice or a seasoned pro, read on for all the information you need to know about removing a bathroom faucet handle.

Step Instructions Image
1 Turn off the water supply to the faucet.
2 Locate the setscrews that hold the handle in place.
3 Use a screwdriver to loosen the setscrews.
4 Carefully remove the handle from the faucet.

Tools and Materials Needed

To remove the handle from a bathroom faucet, you will need the following tools and materials:

  • A screwdriver
  • A wrench
  • Penetrating oil
  • Rags
  • Gloves

Step-by-Step Instructions

1. Turn off the water supply to the faucet. This is usually done by turning the shut-off valve located under the sink.
2. Remove the decorative cap, if there is one. This cap is typically located at the base of the faucet handle.
3. Locate the setscrews that hold the handle in place. These screws are usually located on the underside of the handle.
4. Use a screwdriver to loosen the setscrews. Be careful not to strip the screws.
5. Once the setscrews are loosened, you can remove the handle. Gently pull the handle straight up and off of the faucet.
6. If the handle is stuck, you can apply a small amount of penetrating oil to the setscrews and let it sit for a few minutes. This will help to loosen the screws and make them easier to remove.
7. Once the handle is removed, you can clean the faucet and replace the decorative cap.

Removing the handle from a bathroom faucet is a relatively simple task that can be completed in a few minutes. By following these steps, you can easily remove the handle and clean or replace it as needed.

How to Remove Handle From Bathroom Faucet?

Bathroom faucet handles are an essential part of your plumbing system. They allow you to turn the water on and off, and they can also be used to adjust the temperature of the water. However, if your bathroom faucet handle is broken or damaged, you may need to remove it in order to fix it.

Removing a bathroom faucet handle is a relatively simple task, but it is important to follow the proper steps in order to avoid damaging the faucet. In this guide, we will walk you through the process of removing a bathroom faucet handle, step-by-step.

Tools and Materials

To remove a bathroom faucet handle, you will need the following tools and materials:

  • A flathead screwdriver
  • A Phillips head screwdriver
  • A basin wrench
  • Penetrating oil
  • Rags

Step-by-Step Instructions

1. Turn off the water supply to the faucet. This can usually be done by turning the shut-off valves located under the sink.
2. Remove the decorative cover, if present. This is usually held in place by a small screw or two.
3. Locate the setscrews that hold the handle in place. These are typically located on the back of the handle, near the base.
4. Use a flathead screwdriver to loosen the setscrews. Be careful not to damage the screw heads.
5. Once the setscrews are loosened, you can remove the handle by pulling it straight off.
6. If the handle is stuck, you can apply a small amount of penetrating oil to the setscrews and let it sit for a few minutes. This will help to loosen the screws and make them easier to remove.
7. Once the handle is removed, you can inspect the faucet stem for damage. If the stem is damaged, you will need to replace it before reinstalling the handle.
8. To reinstall the handle, simply reverse the steps above.

Troubleshooting Tips

If you are having trouble removing the handle, here are a few troubleshooting tips:

  • Make sure that you are using the correct tools. A flathead screwdriver should be used to loosen the setscrews, and a Phillips head screwdriver should be used to remove the decorative cover.
  • If the setscrews are stuck, you can apply a small amount of penetrating oil to them and let it sit for a few minutes. This will help to loosen the screws and make them easier to remove.
  • If the handle is still stuck, you can try using a basin wrench to grip the base of the handle and twist it off. Be careful not to damage the faucet.

Additional Information

  • If you are not comfortable removing the bathroom faucet handle yourself, you can always call a plumber to do it for you.
  • Replacing a bathroom faucet handle is a relatively inexpensive and easy project that can be completed in a matter of minutes.
  • If the faucet stem is damaged, you will need to replace it before reinstalling the handle.
  • Be sure to turn off the water supply to the faucet before beginning any work.

Removing a bathroom faucet handle is a relatively simple task that can be completed in a matter of minutes. By following the steps in this guide, you can easily remove the handle and replace it with a new one.

How do I remove the handle from a bathroom faucet?

1. Turn off the water supply to the faucet.
2. Locate the setscrew or hex nut that holds the handle in place. It is typically located on the underside of the handle or on the stem of the faucet.
3. Use a screwdriver to loosen the setscrew or hex nut.
4. Pull the handle straight off of the faucet.

What if the setscrew or hex nut is stuck?

1. Try using a penetrating oil to loosen the setscrew or hex nut.
2. If that doesn’t work, you can try using a wrench or pliers to grip the setscrew or hex nut and turn it. Be careful not to damage the faucet.
3. If you are still unable to remove the setscrew or hex nut, you may need to call a plumber.

How do I replace a bathroom faucet handle?

1. Follow the steps above to remove the old handle.
2. Inspect the faucet stem to make sure it is in good condition. If the stem is damaged, you will need to replace it before installing the new handle.
3. Apply a thin coat of plumber’s grease to the threads of the new handle.
4. Insert the new handle onto the faucet stem and tighten the setscrew or hex nut.
5. Turn on the water supply to the faucet and test the handle to make sure it is working properly.

What if the handle is broken?

1. If the handle is broken, you will need to replace it. You can purchase a new handle from a hardware store or home improvement store.
2. Follow the steps above to remove the old handle.
3. Inspect the faucet stem to make sure it is in good condition. If the stem is damaged, you will need to replace it before installing the new handle.
4. Apply a thin coat of plumber’s grease to the threads of the new handle.
5. Insert the new handle onto the faucet stem and tighten the setscrew or hex nut.
6. Turn on the water supply to the faucet and test the handle to make sure it is working properly.

In this tutorial, we have shown you how to remove a handle from a bathroom faucet. We hope that you found this information helpful. If you have any questions, please leave them in the comments below.

Here are the key takeaways from this tutorial:

  • To remove a handle from a bathroom faucet, you will need a screwdriver and a wrench.
  • The first step is to turn off the water supply to the faucet.
  • Next, use the screwdriver to remove the screws that hold the handle in place.
  • Finally, use the wrench to loosen the nut that connects the handle to the faucet stem.
  • Once the nut is loose, you can pull the handle off of the faucet.

We hope that this tutorial has been helpful. If you have any questions, please leave them in the comments below.

Author Profile

Liana Farrell
Liana Farrell
Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.

Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”

Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.