How to Remove a Delta Tub Faucet | Step-by-Step Guide

How to Remove a Delta Tub Faucet

Your Delta tub faucet is leaking, and you’ve decided it’s time to replace it. But before you can install a new faucet, you need to remove the old one. This may seem like a daunting task, but it’s actually quite simple. With a few tools and a little know-how, you can have the old faucet out in no time.

In this article, we’ll walk you through the steps of removing a Delta tub faucet. We’ll provide detailed instructions and helpful tips, so you can get the job done quickly and easily.

So if you’re ready to learn how to remove a Delta tub faucet, read on!

How To Remove Delta Tub Faucet?

| Step | Task | Tools |
|—|—|—|
| 1 | Shut off the water supply to the faucet. |Plumber’s wrench |
| 2 | Remove the decorative cap on the faucet handle. |Small flathead screwdriver |
| 3 | Remove the setscrews that hold the handle in place. |Phillip’s head screwdriver |
| 4 | Pull the handle off of the faucet. | |
| 5 | Remove the locknut that holds the faucet in place. |Plumber’s wrench |
| 6 | Pull the faucet out of the wall. | |
| 7 | Clean the area around the faucet. | |
| 8 | Install the new faucet. | |

How to Remove a Delta Tub Faucet

This guide will show you how to remove a Delta tub faucet. Delta is a popular brand of faucets, and their products are known for their durability and quality. However, even the best faucets can eventually wear out and need to be replaced. If you’re experiencing problems with your Delta tub faucet, such as leaks or dripping, it may be time to remove it and install a new one.

This guide will walk you through the process of removing a Delta tub faucet, step-by-step. We’ll cover everything from gathering the necessary tools and materials to disconnecting the water supply and removing the faucet itself.

Gather Your Tools and Materials

Before you can begin removing your Delta tub faucet, you’ll need to gather the following tools and materials:

• Adjustable wrench
• Pliers
• Penetrating oil
• Pipe wrench
• Bucket
• New faucet (optional)

Shut Off the Water Supply

The first step is to shut off the water supply to the faucet. This will prevent any water from leaking out while you’re working on the faucet. To do this, locate the shut-off valve for the faucet. This is usually located near the faucet, either behind the wall or under the sink. Turn the valve clockwise to shut off the water supply.

Once the water supply is turned off, you can begin removing the faucet.

Remove the Handle and Escutcheon

The next step is to remove the handle and escutcheon. The handle is the part of the faucet that you turn to control the flow of water. The escutcheon is the decorative cover that surrounds the handle.

To remove the handle, you’ll need to use a pair of pliers to grip the handle and turn it counterclockwise. Once the handle is loose, you can pull it straight off.

The escutcheon is usually held in place by two screws. Use a Phillips head screwdriver to remove the screws. Once the screws are removed, you can pull the escutcheon straight off.

Remove the Faucet Body

Now that you’ve removed the handle and escutcheon, you can begin removing the faucet body. The faucet body is the main part of the faucet that contains the valves and other internal components.

To remove the faucet body, you’ll need to use a pipe wrench to loosen the nuts that hold it in place. These nuts are usually located on the bottom of the faucet. Once the nuts are loosened, you can use a pry bar to carefully pry the faucet body off of the sink.

Be careful not to damage the sink while you’re prying the faucet body off.

Remove the O-Rings

Once the faucet body is removed, you’ll need to remove the O-rings. The O-rings are small rubber rings that seal the faucet to the sink.

To remove the O-rings, you’ll need to use a pair of pliers to grip the O-rings and pull them straight off. Be careful not to damage the O-rings.

Replace the Faucet

If you’re replacing the faucet, now is the time to do so. Simply follow the instructions that came with your new faucet to install it.

Reattach the O-Rings

Once the new faucet is installed, you’ll need to reattach the O-rings. To do this, simply slide the O-rings onto the faucet body. Make sure that the O-rings are seated properly.

Reattach the Faucet Body

Now that the O-rings are reattached, you can reattach the faucet body. To do this, simply reverse the steps that you took to remove the faucet body.

Reattach the Handle and Escutcheon

Now that the faucet body is reattached, you can reattach the handle and escutcheon. To do this, simply reverse the steps that you took to remove the handle and escutcheon.

Turn On the Water Supply

Now that the faucet is reinstalled, you can turn on the water supply. Make sure that there are no leaks.

Congratulations!

You have successfully removed and replaced a Delta tub faucet.

3. Remove the Handle and Escutcheon Plate

To remove the handle and escutcheon plate, you will need:

• A flathead screwdriver
• A Phillips head screwdriver

1. Locate the setscrews on the back of the handle. These screws are typically located near the base of the handle.
2. Use a flathead screwdriver to loosen the setscrews.
3. Once the setscrews are loosened, you can carefully pry the handle off of the faucet.
4. Use a Phillips head screwdriver to remove the screws that hold the escutcheon plate in place.
5. Once the screws are removed, you can carefully pry the escutcheon plate off of the faucet.

4. Remove the Faucet Body

To remove the faucet body, you will need:

• A basin wrench
• A plumber’s putty knife
• A bucket

1. Turn off the water supply to the faucet.
2. Place a bucket underneath the faucet to catch any water that may leak out.
3. Use a basin wrench to loosen the nuts that connect the faucet body to the sink.
4. Once the nuts are loosened, you can carefully remove the faucet body from the sink.
5. Use a plumber’s putty knife to remove any remaining plumber’s putty from the sink.

By following these steps, you can easily remove a Delta tub faucet. If you have any questions or concerns, please consult a qualified plumber.

How do I remove a Delta tub faucet?

1. Turn off the water supply to the faucet. There will be a shut-off valve located near the faucet. Turn the valve clockwise until it is completely closed.
2. Remove the handle(s). There will be a setscrew located under the handle(s). Use a screwdriver to loosen the setscrew and remove the handle(s).
3. Remove the escutcheon. The escutcheon is the decorative cover that surrounds the faucet. It is typically held in place by two screws. Use a screwdriver to remove the screws and remove the escutcheon.
4. Remove the faucet body. There will be two nuts located on the back of the faucet. Use a wrench to loosen the nuts and remove the faucet body.
5. Replace the faucet. Reverse the steps above to install the new faucet.

What tools do I need to remove a Delta tub faucet?

You will need the following tools to remove a Delta tub faucet:

• A screwdriver
• A wrench

How long does it take to remove a Delta tub faucet?

It typically takes about 15 minutes to remove a Delta tub faucet.

What if I can’t find the shut-off valve for the faucet?

If you can’t find the shut-off valve for the faucet, you can turn off the water to the entire house. The water shut-off valve is typically located near the water meter.

What if I can’t remove the handle(s)?

If you can’t remove the handle(s), you can try using a heat gun or a hair dryer to heat the handle(s). This will loosen the adhesive that is holding the handle(s) in place.

What if I can’t remove the escutcheon?

If you can’t remove the escutcheon, you can try using a pry bar to gently pry it loose. Be careful not to damage the escutcheon.

What if I can’t remove the faucet body?

If you can’t remove the faucet body, you can try using a penetrating oil to loosen the nuts. Allow the penetrating oil to soak into the nuts for several minutes before trying to loosen them.

What if I still can’t remove the faucet?

If you still can’t remove the faucet, you may need to call a plumber.

In this blog post, we have discussed how to remove a Delta tub faucet. We have covered the steps involved in the process, as well as some of the common problems that you may encounter. We hope that this information has been helpful and that you are now able to remove your Delta tub faucet with ease.

Here are some key takeaways from the blog post:

• Before you begin, make sure that you have the necessary tools and materials.
• Turn off the water supply to the faucet.
• Remove the escutcheon and the screws that hold the faucet in place.
• Use a wrench to loosen the nuts that connect the faucet to the pipes.
• Carefully pull the faucet off of the pipes.
• Inspect the faucet for any damage and replace any parts that are necessary.
• Reinstall the faucet by following the steps in reverse order.

We hope that this blog post has been helpful and that you are now able to remove your Delta tub faucet with ease.