How to Remove a Delta Bathtub Faucet | Step-by-Step Guide

AvatarByLiana Farrell Faucet Queries

How to Remove a Delta Bathtub Faucet

Your Delta bathtub faucet is leaking, and you’ve decided it’s time to replace it. But before you can install a new faucet, you need to remove the old one. This can be a daunting task, but it’s actually quite simple if you know what you’re doing.

In this article, we’ll walk you through the steps of removing a Delta bathtub faucet, from start to finish. We’ll provide detailed instructions and images, so you can be sure that the job is done correctly.

So if you’re ready to learn how to remove a Delta bathtub faucet, read on!

Step Instructions Image
1 Turn off the water supply to the faucet.
2 Remove the handle by unscrewing the set screws.
3 Unscrew the locknut under the faucet.
4 Pull the faucet straight up and off of the sink.

How to Remove a Delta Bathtub Faucet?

1. Gather the necessary tools and materials.

To remove a Delta bathtub faucet, you will need the following tools and materials:

  • Adjustable wrench
  • Pliers
  • Penetrating oil
  • Tape measure
  • Bucket
  • Gloves
  • Safety glasses

2. Turn off the water supply to the faucet.

The first step is to turn off the water supply to the faucet. This will prevent any water from leaking out of the faucet while you are working on it.

To turn off the water supply, locate the shut-off valves for the hot and cold water supply lines to the faucet. These valves are typically located behind the faucet, near the wall.

Turn the valves clockwise to close the water supply. You may need to use a wrench to turn the valves if they are tight.

3. Remove the escutcheon.

The escutcheon is the decorative cover that surrounds the faucet. It is typically held in place by two screws.

Locate the screws that hold the escutcheon in place. These screws are typically located on the back of the escutcheon.

Use a Phillips head screwdriver to remove the screws.

Once the screws are removed, the escutcheon should come off easily.

4. Remove the faucet handles.

The faucet handles are held in place by a setscrew.

Locate the setscrew on the back of the faucet handle. This screw is typically located near the base of the handle.

Use a small flathead screwdriver to loosen the setscrew.

Once the setscrew is loose, the faucet handle should come off easily.

5. Remove the faucet stem.

The faucet stem is the part of the faucet that controls the flow of water. It is located inside the faucet body.

To remove the faucet stem, you will need to use a basin wrench.

A basin wrench is a special type of wrench that is designed for removing faucet stems. It has a long, curved handle and a narrow head.

Insert the basin wrench into the slot on the faucet stem.

Turn the wrench clockwise to loosen the faucet stem.

Once the faucet stem is loose, you can remove it from the faucet body.

6. Remove the faucet body.

The faucet body is the main part of the faucet. It is held in place by two bolts.

Locate the bolts that hold the faucet body in place. These bolts are typically located on the bottom of the faucet body.

Use a wrench to loosen the bolts.

Once the bolts are loose, the faucet body should come off easily.

7. Clean the faucet body and escutcheon.

Once the faucet body and escutcheon are removed, you can clean them.

Use a damp cloth to wipe down the faucet body and escutcheon.

You can also use a degreaser to clean the faucet body if it is particularly dirty.

8. Inspect the faucet body for damage.

Once the faucet body is clean, you should inspect it for damage.

Look for cracks, leaks, or other damage.

If the faucet body is damaged, you will need to replace it.

9. Install the new faucet body.

If the faucet body is not damaged, you can install the new faucet body.

To install the new faucet body, you will need to reverse the steps you took to remove the old faucet body.

Start by attaching the new faucet body to the sink.

Then, attach the faucet handles to the faucet body.

Finally, attach the escutcheon to the faucet body.

10. Turn on the water supply to the faucet.

Once the new faucet body is installed, you can turn on the water supply to the faucet.

Check for leaks around the faucet.

If there are no leaks, you are finished!

Replacing a Delta bathtub faucet is a relatively simple task that can be completed in about an hour. By following these steps, you can easily remove and replace your old faucet with a new one.

Tips for Removing a Delta Bathtub Faucet

  • If the faucet is stuck, you can try using a penetrating oil to loosen the threads.
  • Be careful not to damage the faucet body or escutcheon when removing them.

*

3. Remove the faucet handles.

The faucet handles are held in place by screws. To remove them, you will need a pair of pliers.

1. Grip the handle screws with the pliers and turn them counterclockwise.
2. Continue turning the screws until they come loose and you can remove the handles.

Set the handles aside for now. You will reinstall them later.

4. Remove the faucet body.

The faucet body is connected to the sink by nuts. To remove it, you will need an adjustable wrench.

1. Locate the nuts that connect the faucet body to the sink. They are usually located on the underside of the faucet.
2. Use the adjustable wrench to loosen the nuts.
3. Continue loosening the nuts until they come loose and you can remove the faucet body.

Be careful not to drop the faucet body. It is heavy and can be damaged if it falls.

5. Remove the faucet stem.

The faucet stem is the part of the faucet that controls the flow of water. It is located inside the faucet body. To remove it, you will need a faucet tool.

1. Insert the faucet tool into the hole in the center of the faucet body.
2. Turn the faucet tool counterclockwise until the faucet stem comes loose.
3. Remove the faucet stem and set it aside.

6. Remove the old gaskets.

The faucet body is sealed to the sink with gaskets. To remove them, you will need a flathead screwdriver.

1. Locate the gaskets around the faucet body.
2. Use the flathead screwdriver to pry the gaskets loose.
3. Continue prying until the gaskets come loose and you can remove them.

7. Install the new faucet.

To install the new faucet, you will need to follow the instructions that came with the faucet.

Generally, the process is as follows:

1. Apply a thin coat of plumber’s putty to the underside of the new faucet body.
2. Align the new faucet body with the sink and install it using the nuts that you removed earlier.
3. Tighten the nuts until they are snug.
4. Install the new faucet handles and screws.
5. Turn on the water and test the faucet to make sure that it is working properly.

.

Replacing a Delta bathtub faucet is a relatively simple task that can be completed in about an hour. By following these steps, you can easily remove your old faucet and install a new one.

How do I remove a Delta bathtub faucet?

1. Turn off the water supply to the faucet. This is usually located under the sink.
2. Remove the drain plug. This will allow you to access the screws that hold the faucet in place.
3. Locate the screws that hold the faucet in place. There are usually two screws, one on each side of the faucet.
4. Use a screwdriver to loosen the screws. Be careful not to strip the screws.
5. Carefully lift the faucet up and away from the sink. Be careful not to damage the sink.
6. Replace the old faucet with a new one. Follow the instructions that came with the new faucet.

What tools do I need to remove a Delta bathtub faucet?

You will need the following tools to remove a Delta bathtub faucet:

  • A screwdriver
  • A wrench
  • A drain plug

How long does it take to remove a Delta bathtub faucet?

It should take about 15 minutes to remove a Delta bathtub faucet.

What if I can’t find the screws that hold the faucet in place?

If you can’t find the screws that hold the faucet in place, you can try using a flashlight to look for them. You can also try using a magnet to see if you can find them. If you still can’t find the screws, you can call a plumber to help you remove the faucet.

What if I damage the faucet when I’m removing it?

If you damage the faucet when you’re removing it, you can try to repair it yourself. You can also call a plumber to help you repair the faucet.

What if I don’t want to remove the faucet myself?

If you don’t want to remove the faucet yourself, you can call a plumber to help you. A plumber will be able to remove the faucet quickly and easily.

In this blog post, we have discussed how to remove a Delta bathtub faucet. We have provided step-by-step instructions, along with images and videos, to make the process as easy as possible. We have also discussed some of the common problems that you may encounter, and how to troubleshoot them.

We hope that this blog post has been helpful. If you have any questions, please do not hesitate to contact us.

Author Profile

Liana Farrell
Liana Farrell
Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.

Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”

Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.