How To Remove Bemis Toilet Seat With Metal Hinges?

How to Remove a Bemis Toilet Seat with Metal Hinges

Your Bemis toilet seat is one of the most used parts of your bathroom, but it’s also one of the most overlooked. When it’s time to clean or replace your toilet seat, you may be surprised at how easy it is to remove. With just a few simple steps, you can have your toilet seat off in no time.

In this article, we’ll show you how to remove a Bemis toilet seat with metal hinges. We’ll provide step-by-step instructions, along with pictures and videos to help you along the way. So whether you’re a first-time DIYer or a seasoned pro, read on for all the information you need to know about removing a Bemis toilet seat with metal hinges.

“`html

Step	Instructions	Image
1	Locate the two bolts that hold the toilet seat to the toilet bowl.
2	Use a screwdriver to loosen the bolts.
3	Once the bolts are loose, lift up on the toilet seat and carefully remove it from the toilet bowl.

“`

How To Remove Bemis Toilet Seat With Metal Hinges?

Tools and Materials Needed

• Adjustable wrench
• Pliers
• Penetrating oil
• Rag

Steps to Remove the Toilet Seat

1. Turn off the water supply to the toilet. This is usually located under the sink or behind the toilet. Turn the valve clockwise until it is completely closed.
2. Flush the toilet to empty the tank. This will help to loosen the bolts that hold the toilet seat in place.
3. Locate the bolts that hold the toilet seat in place. These are usually located on the back of the toilet seat, just below the rim.
4. Apply penetrating oil to the bolts. This will help to loosen them and make them easier to remove.
5. Use a wrench to loosen the bolts. Start by turning the bolts counterclockwise. You may need to use a pliers to hold the nuts in place while you turn the wrench.
6. Once the bolts are loose, lift up on the toilet seat and pull it away from the toilet. Be careful not to drop the seat, as it can be heavy.
7. Clean the toilet bowl and seat. Use a toilet brush and cleaning solution to clean the toilet bowl and seat.
8. Reinstall the toilet seat. Place the toilet seat back on the toilet and tighten the bolts. Make sure that the seat is level and secure.

Removing a Bemis toilet seat with metal hinges is a relatively simple task that can be completed in a few minutes. By following these steps, you can easily remove the seat and clean the toilet bowl and seat.

Here are some additional tips for removing a Bemis toilet seat with metal hinges:

• If the bolts are stuck, you can try using a hair dryer to heat them up. This will help to loosen the bolts and make them easier to remove.
• If you are having trouble removing the bolts, you can try using a lubricant, such as WD-40. This will help to loosen the bolts and make them easier to turn.
• Be careful not to drop the toilet seat, as it can be heavy.
• Make sure that the toilet seat is level and secure before using it.

How To Remove Bemis Toilet Seat With Metal Hinges

Step 1: Gather your tools

To remove a Bemis toilet seat with metal hinges, you will need the following tools:

• A flathead screwdriver
• A Phillips head screwdriver
• A pair of pliers
• A bucket
• A rag

Step 2: Flush the toilet to remove any water from the bowl

Before you can remove the toilet seat, you need to flush the toilet to remove any water from the bowl. This will make it easier to access the bolts that secure the toilet seat to the toilet bowl.

Step 3: Locate the two bolts that secure the toilet seat to the toilet bowl

The two bolts that secure the toilet seat to the toilet bowl are located on the back of the toilet seat. They are typically located about halfway between the front and back of the toilet seat.

Step 4: Remove the bolts that secure the toilet seat to the toilet bowl

To remove the bolts that secure the toilet seat to the toilet bowl, you will need to use a flathead screwdriver and a Phillips head screwdriver.

1. First, use the flathead screwdriver to loosen the locknut that is located on the top of the bolt.
2. Once the locknut is loosened, use the Phillips head screwdriver to unscrew the bolt.
3. Repeat this process for the second bolt.

Step 5: Remove the toilet seat

Once the bolts have been removed, you can now remove the toilet seat. To do this, simply lift up on the front of the toilet seat and pull it away from the toilet bowl.

Step 6: Clean the toilet bowl

Now that the toilet seat has been removed, you can clean the toilet bowl. To do this, use a bucket and a rag to wipe down the inside of the toilet bowl.

Step 7: Reinstall the toilet seat

To reinstall the toilet seat, simply reverse the steps that you took to remove it. First, align the toilet seat with the toilet bowl. Then, insert the bolts through the holes in the toilet seat and tighten them with the flathead screwdriver and Phillips head screwdriver. Finally, tighten the locknut on the top of the bolt.

By following these steps, you can easily remove and reinstall a Bemis toilet seat with metal hinges.

How do I remove a Bemis toilet seat with metal hinges?

1. Gather your tools. You will need a screwdriver, a pair of pliers, and a rag.
2. Locate the hinge screws. The hinge screws are located on the back of the toilet seat, near the front.
3. Use the screwdriver to loosen the hinge screws. Turn the screws counterclockwise until they are loose enough to remove.
4. Use the pliers to hold the hinge caps in place. The hinge caps are located on the front of the toilet seat, near the hinges. Use the pliers to hold the caps in place while you remove the hinge screws.
5. Remove the hinge caps. Once the hinge screws are removed, you can lift up on the hinge caps and remove them.
6. Lift up on the toilet seat. With the hinge caps removed, you can now lift up on the toilet seat and remove it.
7. Clean the toilet bowl. Once the toilet seat is removed, you can clean the toilet bowl.
8. Reinstall the toilet seat. To reinstall the toilet seat, simply reverse the steps above.

In this blog post, we have discussed how to remove a Bemis toilet seat with metal hinges. We have provided a step-by-step guide, as well as some tips and tricks to make the process easier. We hope that this information has been helpful, and that you are now able to remove your Bemis toilet seat with ease.

Here are some key takeaways from the article:

• To remove a Bemis toilet seat with metal hinges, you will need a flathead screwdriver, a pair of pliers, and a putty knife.
• The first step is to locate the two bolts that hold the toilet seat in place. These bolts are usually located on the back of the toilet seat, near the hinges.
• Use the flathead screwdriver to loosen the bolts. Be careful not to damage the toilet seat or the bolts.
• Once the bolts are loosened, use the pliers to grip the nuts on the end of the bolts and turn them counterclockwise. This will release the bolts from the toilet seat.
• Use the putty knife to pry the toilet seat up and off of the toilet bowl. Be careful not to damage the toilet bowl or the toilet seat.
• Once the toilet seat is removed, you can clean the toilet bowl and install a new toilet seat.