How To Remove American Standard Toilet Seat With Hidden Bolts?

AvatarByLiana Farrell Toilet Queries

How To Remove an American Standard Toilet Seat With Hidden Bolts

If you’ve ever tried to remove an American Standard toilet seat, you know that it can be a bit tricky. That’s because American Standard toilets use hidden bolts to secure the seat to the bowl. These bolts are located behind the toilet tank, and they’re not easy to see or reach.

But don’t worry, we’re here to help. In this article, we’ll show you how to remove an American Standard toilet seat with hidden bolts in just a few simple steps.

Step 1: Gather your tools

To remove an American Standard toilet seat with hidden bolts, you’ll need the following tools:

  • A screwdriver
  • A pair of pliers
  • A rag

Step 2: Locate the hidden bolts

The first step is to locate the hidden bolts. These bolts are located behind the toilet tank, and they’re typically about 1 inch in diameter. They’re also usually located about 2 inches apart.

To find the hidden bolts, you’ll need to look behind the toilet tank. You may need to move the tank slightly to get a good look. Once you’ve located the bolts, mark their positions with a pen or marker.

Step 3: Remove the bolts

Now that you’ve located the hidden bolts, you can remove them. To do this, you’ll need a screwdriver. Insert the screwdriver into the head of the bolt and turn it counterclockwise. You may need to use a bit of force to loosen the bolts.

Once the bolts are loosened, you can use the pliers to remove them completely. Be careful not to drop the bolts into the toilet bowl.

Step 4: Remove the toilet seat

Now that the bolts are removed, you can remove the toilet seat. To do this, simply lift up on the front of the seat and pull it away from the bowl. The seat should come off easily.

Step 5: Clean the toilet bowl

Now that the toilet seat is removed, you can clean the toilet bowl. Use a rag and some cleaning solution to wipe down the inside of the bowl. Be sure to clean around the bolts where the seat was attached.

Step 6: Reinstall the toilet seat

To reinstall the toilet seat, simply reverse the steps you took to remove it. First, align the holes in the seat with the bolts in the bowl. Then, insert the bolts into the holes and tighten them with the screwdriver.

Once the bolts are tight, you can lower the toilet seat onto the bowl. The seat should snap into place.

Congratulations! You’ve successfully removed and reinstalled an American Standard toilet seat with hidden bolts.

Step Instructions Image
1 Locate the two bolts that are hidden under the toilet seat. They are located on either side of the toilet bowl, just behind the seat.
2 Insert a flathead screwdriver into the slot on each bolt and turn counterclockwise to loosen.
3 Once the bolts are loose, lift up on the toilet seat and pull it away from the toilet bowl.

This guide will show you how to remove an American Standard toilet seat with hidden bolts. This type of toilet seat is typically found in older homes and apartments. The hidden bolts are located on the back of the toilet seat, just below the rim. They are typically covered by a plastic caps. To remove the caps, use a flathead screwdriver to pry them up.

Tools and Materials Needed

  • Adjustable wrench
  • Pliers
  • Penetrating oil
  • Rag

Locating the Hidden Bolts

The hidden bolts are located on the back of the toilet seat, just below the rim. They are typically covered by a plastic caps. To remove the caps, use a flathead screwdriver to pry them up.

Removing the Toilet Seat

1. Place the adjustable wrench on the nut below the toilet seat.
2. Turn the wrench clockwise to loosen the nut.
3. Use the pliers to hold the nut in place while you turn the wrench.
4. Continue turning the wrench until the nut is loose enough to remove.
5. Remove the nut and the toilet seat.

Replacing the Toilet Seat

1. Place the new toilet seat on the toilet bowl.
2. Insert the bolts through the holes in the toilet seat and into the nuts below the bowl.
3. Tighten the nuts with the adjustable wrench.
4. Replace the plastic caps over the bolts.

You have now successfully removed and replaced an American Standard toilet seat with hidden bolts. If you have any questions, please consult a qualified plumber.

Additional Tips

  • If the bolts are stuck, you can apply penetrating oil to them and let it sit for a few minutes before trying to loosen them.
  • If the bolts are still stuck, you can try using a heat gun to warm them up. This will make them easier to loosen.
  • Be careful not to damage the toilet seat when you are removing it.
  • Make sure that the new toilet seat is the same size and shape as the old one.

How to Remove an American Standard Toilet Seat with Hidden Bolts

American Standard toilet seats are typically equipped with two hidden bolts that are located behind the toilet bowl. These bolts can be difficult to remove, but with a little patience, you can do it yourself.

Tools and Materials

  • Adjustable wrench
  • Pliers
  • Penetrating oil
  • Rag

Steps

1. Locate the hidden bolts. The hidden bolts are located on the back of the toilet bowl, just below the toilet seat. They are typically covered by two plastic caps.
2. Remove the plastic caps. To remove the plastic caps, you will need to use a pair of pliers. Grip the cap with the pliers and twist it counterclockwise until it comes off.
3. Apply penetrating oil to the bolts. Once the caps are removed, you will see the bolts underneath. Spray the bolts with penetrating oil to loosen them.
4. Loosen the bolts. Use an adjustable wrench to loosen the bolts. Be careful not to overtighten the bolts, as this could damage the toilet seat.
5. Lift the toilet seat off of the toilet. Once the bolts are removed, you can lift the toilet seat off of the toilet.
6. Replace the toilet seat. To replace the seat, reverse the steps above. Make sure that the bolts are tightened securely, but not too tightly.

Tips

  • If the bolts are difficult to loosen, you can try using a heat gun to warm them up. This will help to loosen the rust and make them easier to turn.
  • Be careful not to drop the bolts into the toilet bowl. If you do, you can use a magnet to retrieve them.
  • If you are unable to remove the toilet seat yourself, you can call a plumber for assistance.

Removing an American Standard toilet seat with hidden bolts is a relatively simple task that can be completed in a few minutes. By following the steps above, you can easily remove the seat and replace it with a new one.

How do I remove an American Standard toilet seat with hidden bolts?

1. Locate the hidden bolts. The hidden bolts are located on the underside of the toilet seat, near the front and back. They are typically small and difficult to see, so you may need to use a flashlight to locate them.
2. Insert a flathead screwdriver into the slot on each bolt. Turn the screwdriver counterclockwise to loosen the bolts.
3. Once the bolts are loose, lift up on the front of the toilet seat and pull it away from the toilet. The seat should come off easily.

What if the bolts are stuck?

If the bolts are stuck, you can try using a penetrating oil to loosen them. Spray the oil onto the bolts and let it sit for a few minutes. Then, try to loosen the bolts again using the screwdriver.

What if I can’t find the hidden bolts?

If you can’t find the hidden bolts, you can try using a mirror to look under the toilet seat. You can also try feeling around the underside of the seat with your fingers. The bolts are typically located near the front and back of the seat.

What if I damage the toilet seat while removing it?

If you damage the toilet seat while removing it, you can try to repair it using a sealant or adhesive. You can also replace the toilet seat with a new one.

How do I put the toilet seat back on?

To put the toilet seat back on, simply reverse the steps above. First, align the holes in the toilet seat with the bolts on the toilet. Then, insert the bolts into the holes and tighten them using the screwdriver. Finally, lower the front of the toilet seat and press down until it snaps into place.

In this article, we have discussed how to remove an American Standard toilet seat with hidden bolts. We have provided a step-by-step guide, as well as some tips and tricks. We hope that this article has been helpful. If you have any further questions, please do not hesitate to contact us.

Author Profile

Liana Farrell
Liana Farrell
Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.

Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”

Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.