How to Remove a Jetted Bathtub (The Complete Guide)

AvatarByLiana Farrell Bathtub Queries

How to Remove a Jetted Bathtub

If you’re looking to remodel your bathroom, one of the first things you might want to do is remove the old jetted bathtub. Jetted bathtubs can be a great way to relax and unwind, but they can also be a pain to maintain. If your jetted bathtub is leaking, broken, or simply outdated, it might be time to give it the old heave-ho.

Removing a jetted bathtub is a relatively straightforward process, but it does require some time and effort. In this article, we’ll walk you through the steps of removing a jetted bathtub, from start to finish. We’ll also provide tips on how to dispose of the old bathtub and how to prepare your bathroom for a new one.

So if you’re ready to say goodbye to your old jetted bathtub, read on!

Step Instructions Image
1 Turn off the power to the bathtub. Turn off the power to the bathtub
2 Remove the drain cover. Remove the drain cover
3 Disconnect the water lines. Disconnect the water lines
4 Remove the jet nozzles. Remove the jet nozzles
5 Remove the bathtub surround. Remove the bathtub surround
6 Remove the bathtub. Remove the bathtub

A jetted bathtub is a type of bathtub that has jets built into the bottom of the tub. These jets can be used to provide a massage-like experience, and they can also help to circulate the water and keep it warm. However, jetted bathtubs can also be difficult to remove if you ever decide to remodel your bathroom.

In this guide, we will walk you through the process of removing a jetted bathtub. We will provide you with a list of the tools and materials you will need, as well as step-by-step instructions on how to remove the bathtub.

Tools and Materials Needed

To remove a jetted bathtub, you will need the following tools and materials:

  • Tape measure
  • Hacksaw
  • Safety goggles
  • Gloves
  • Plumbing wrench
  • Pliers
  • Bucket
  • Shop vac
  • Penetrating oil
  • Drain stopper
  • Plumber’s putty

Step-by-Step Instructions

1. Turn off the water supply to the bathtub. Locate the shutoff valve for the bathtub and turn it off. This will prevent water from flowing into the bathtub while you are working on it.
2. Drain the bathtub. Place a drain stopper in the bathtub drain and open the drain. Allow the bathtub to drain completely.
3. Remove the faucets. Use a wrench to loosen the nuts that hold the faucets in place. Once the nuts are loosened, you can pull the faucets off of the bathtub.
4. Remove the drain assembly. The drain assembly is located at the bottom of the bathtub. It is held in place by a few nuts and bolts. Use a wrench to loosen the nuts and bolts and remove the drain assembly.
5. Cut the plumbing lines. The plumbing lines that connect the bathtub to the water supply and drain are located behind the wall. Use a hacksaw to cut the plumbing lines as close to the bathtub as possible.
6. Remove the bathtub. Use a pry bar to pry the bathtub away from the wall. Once the bathtub is loose, you can lift it out of the bathroom.
7. Clean up the mess. Use a shop vac to clean up any water or debris that was left behind.
8. Repair the drywall. If the drywall behind the bathtub was damaged, you will need to repair it before you can install a new bathtub.

Removing a jetted bathtub can be a difficult and time-consuming task, but it is definitely doable if you follow the steps in this guide. Be sure to take your time and be careful, and you should be able to remove the bathtub without any problems.

Here are some additional tips that may help you remove your jetted bathtub:

  • If you are having trouble removing the faucets, you can try using a penetrating oil to loosen them. Penetrating oil is a type of oil that helps to dissolve rust and other deposits that can make it difficult to remove nuts and bolts.
  • If you are having trouble removing the drain assembly, you can try using a pipe wrench to grip the drain pipe and turn it counterclockwise.
  • If you are having trouble cutting the plumbing lines, you can try using a reciprocating saw with a metal cutting blade.
  • If you are having trouble removing the bathtub, you can try using a sledgehammer or pry bar to break it loose. However, be careful not to damage the surrounding walls or floor.

By following these tips, you can safely and successfully remove your jetted bathtub.

Turn off the water supply to the bathtub

The first step in removing a jetted bathtub is to turn off the water supply to the bathtub. This will prevent any water from leaking out of the bathtub while you are working on it. To do this, locate the water supply valve for the bathtub. This is usually located near the bottom of the bathtub, on the side of the wall. Turn the valve clockwise to turn off the water supply to the bathtub.

Drain the water from the bathtub

Once you have turned off the water supply to the bathtub, you will need to drain the water from the bathtub. To do this, open the drain plug in the bottom of the bathtub. If the drain plug is stuck, you can try using a plunger to loosen it. Once the drain plug is open, allow all of the water to drain out of the bathtub.

Remove the bathtub drain

The next step is to remove the bathtub drain. The bathtub drain is located in the center of the bottom of the bathtub. To remove the drain, you will need to use a wrench to loosen the nuts that hold the drain in place. Once the nuts are loose, you can pull the drain out of the bathtub.

Remove the bathtub faucet

The bathtub faucet is located at the end of the bathtub spout. To remove the faucet, you will need to use a wrench to loosen the nuts that hold the faucet in place. Once the nuts are loose, you can pull the faucet out of the bathtub.

Remove the bathtub surround

The bathtub surround is the material that surrounds the bathtub. It is usually made of fiberglass, acrylic, or tile. To remove the bathtub surround, you will need to use a pry bar to pry it loose from the wall. Once the surround is loose, you can pull it away from the bathtub.

Remove the bathtub itself

The bathtub itself is usually made of cast iron or acrylic. To remove the bathtub, you will need to use a crowbar to pry it loose from the floor. Once the bathtub is loose, you can lift it out of the bathroom.

Reinstall the new bathtub

To reinstall the new bathtub, you will need to reverse the steps that you took to remove the old bathtub. First, you will need to install the new bathtub drain. Then, you will need to install the new bathtub faucet. Next, you will need to install the new bathtub surround. Finally, you will need to connect the water supply to the new bathtub.

Removing and reinstalling a jetted bathtub is a relatively simple task. However, it is important to follow the steps carefully in order to avoid damaging the bathtub or the surrounding walls. If you are not comfortable doing this type of work, it is best to hire a professional to do it for you.

How do I remove a jetted bathtub?

Answer:

1. Turn off the water supply to the bathtub. Locate the shut-off valves for the hot and cold water lines to the bathtub. Turn them both off to prevent water from flowing into the bathtub while you are working.
2. Drain the water from the bathtub. Open the drain plug in the bottom of the bathtub and allow all of the water to drain out.
3. Remove the faucets. The faucets on a jetted bathtub are typically held in place by screws or nuts. Use a screwdriver to remove the screws or nuts that hold the faucets in place. Once the faucets are removed, you can disconnect the water supply lines from the back of the faucets.
4. Remove the jets. The jets on a jetted bathtub are typically held in place by screws or nuts. Use a screwdriver to remove the screws or nuts that hold the jets in place. Once the jets are removed, you can disconnect the air supply lines from the back of the jets.
5. Remove the bathtub surround. The bathtub surround is the material that surrounds the bathtub. It is typically made of fiberglass, acrylic, or tile. To remove the bathtub surround, you will need to remove the screws or nails that hold it in place. Once the screws or nails are removed, you can carefully pry the bathtub surround away from the bathtub.
6. Remove the bathtub. The bathtub is typically held in place by bolts or clips. Use a wrench to loosen the bolts or clips that hold the bathtub in place. Once the bolts or clips are loosened, you can carefully lift the bathtub out of the bathtub enclosure.

What tools do I need to remove a jetted bathtub?

Answer:

You will need the following tools to remove a jetted bathtub:

  • A screwdriver
  • A wrench
  • A pry bar
  • A bucket
  • A shop vac

How long does it take to remove a jetted bathtub?

Answer:

It typically takes about 2-4 hours to remove a jetted bathtub. The exact amount of time it takes will depend on the size and type of bathtub you have.

What are the risks involved in removing a jetted bathtub?

Answer:

There are a few risks involved in removing a jetted bathtub, including:

  • Electrical shock: If you are not careful, you could accidentally cut into an electrical wire while you are removing the bathtub. This could result in an electrical shock.
  • Water damage: If you do not properly drain the bathtub before you start removing it, you could damage the floor or walls around the bathtub.
  • Injury: If you are not careful, you could injure yourself while you are removing the bathtub. Be sure to wear gloves and eye protection to protect yourself from sharp objects and falling debris.

Can I remove a jetted bathtub myself?

Answer:

Yes, you can remove a jetted bathtub yourself. However, it is a relatively difficult and time-consuming project. If you are not comfortable working with tools or if you are not confident in your ability to complete the project safely, you may want to hire a professional to do it for you.

What is the best way to dispose of a jetted bathtub?

Answer:

The best way to dispose of a jetted bathtub is to recycle it. If you cannot recycle the bathtub, you can dispose of it by taking it to a landfill or by having it hauled away by a junk removal company.

In this article, we have discussed how to remove a jetted bathtub. We have covered the steps involved in the process, as well as the tools and materials you will need. We have also provided tips for safety and for dealing with any unexpected challenges.

We hope that this article has been helpful and that you are now able to remove your jetted bathtub safely and successfully. If you have any questions or concerns, please do not hesitate to contact us.

Here are some key takeaways from this article:

  • Removing a jetted bathtub is a complex process that requires careful planning and execution.
  • Before you begin, make sure you have the necessary tools and materials.
  • Be aware of the potential hazards involved in removing a jetted bathtub, and take steps to mitigate them.
  • If you encounter any unexpected challenges, do not hesitate to seek professional help.

Author Profile

Liana Farrell
Liana Farrell
Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.

Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”

Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.