How To Move Toilet Location?

AvatarByLiana Farrell Toilet Queries

How to Move a Toilet: A Step-by-Step Guide

Moving a toilet is a big job, but it’s one that you can definitely do yourself if you’re up for the challenge. In this guide, we’ll walk you through the process step-by-step, from start to finish. We’ll cover everything you need to know, from how to disconnect the toilet from the water and sewer lines to how to properly reattach it in its new location.

So if you’re ready to take on this DIY project, read on for all the information you need to know.

Step Action Notes
1 Disconnect the water supply to the toilet Turn off the water supply valve located behind the toilet.
2 Disconnect the sewer line to the toilet Remove the nut that connects the toilet to the sewer line.
3 Remove the toilet from the floor Slide the toilet forward and lift it up to remove it from the floor.
4 Move the toilet to its new location Slide the toilet into place and align it with the flange.
5 Reconnect the water supply and sewer line to the toilet Connect the water supply line and sewer line to the toilet.
6 Test the toilet Turn on the water supply and flush the toilet to make sure it is working properly.

How to Move a Toilet

Moving a toilet is a relatively simple task, but it does require some planning and preparation. By following these steps, you can safely and successfully move your toilet to a new location.

Planning the Move

The first step is to plan the move. This involves determining the new location of the toilet, measuring the distance between the old and new locations, and considering the plumbing and drainage requirements.

  • Determine the new location of the toilet. The best place for a toilet is typically in a central location in the bathroom, so that it is easily accessible to everyone who uses the bathroom. However, you may need to consider other factors, such as the location of the plumbing and drainage pipes.
  • Measure the distance between the old and new locations. This will help you determine how much pipe you need to cut and how long the new drain line will need to be.
  • Consider the plumbing and drainage requirements. You will need to make sure that the new location of the toilet has the correct plumbing and drainage requirements. This includes having a water supply line, a drain line, and a vent line.
  • Get the necessary permits and approvals. If you live in a condominium or townhouse, you may need to get permission from the association before moving the toilet. You may also need to get a permit from the city or county.

Preparing the Toilet

Once you have planned the move, you can begin preparing the toilet. This involves turning off the water supply to the toilet, draining the water from the toilet bowl, removing the toilet seat, and disconnecting the water supply line and the drain line.

  • Turn off the water supply to the toilet. The water supply to the toilet is typically located behind the toilet. To turn off the water supply, you will need to find the shut-off valve and turn it clockwise until it is closed.
  • Drain the water from the toilet bowl. To drain the water from the toilet bowl, you will need to use a plunger or a toilet auger.
  • Remove the toilet seat. The toilet seat is typically held in place by two bolts. To remove the toilet seat, you will need to loosen the bolts and then lift the seat off of the toilet.
  • Disconnect the water supply line and the drain line. The water supply line and the drain line are typically located underneath the toilet. To disconnect the water supply line, you will need to unscrew the nut that connects the line to the toilet. To disconnect the drain line, you will need to unscrew the nut that connects the line to the floor.

Moving the Toilet

Once you have prepared the toilet, you can begin moving it. This involves lifting the toilet and carrying it to the new location.

  • Lift the toilet. To lift the toilet, you will need to have two people. One person will need to hold the toilet bowl while the other person lifts the toilet tank.
  • Carry the toilet. Once you have lifted the toilet, you will need to carry it to the new location. Be careful not to drop the toilet, as this could damage the toilet or the floor.

Installing the Toilet

Once you have moved the toilet to the new location, you can begin installing it. This involves connecting the water supply line, the drain line, and the vent line.

  • Connect the water supply line. To connect the water supply line, you will need to screw the nut onto the toilet and then connect the line to the shut-off valve.
  • Connect the drain line. To connect the drain line, you will need to screw the nut onto the toilet and then connect the line to the floor.
  • Connect the vent line. The vent line is typically a small pipe that connects the toilet to the roof. To connect the vent line, you will need to screw the nut onto the toilet and then connect the line to the roof.

Testing the Toilet

Once you have installed the toilet, you can test it to make sure that it is working properly. To test the toilet, you will need to flush it and make sure that the water flows properly and that there are no leaks.

Moving a toilet is a relatively simple task, but it does require some planning and preparation. By following these steps, you can safely and successfully move your toilet to a new location.

Additional Tips

  • If you are not comfortable moving the toilet yourself, you can hire a plumber to do the job for you.
  • Make sure that you have all of the necessary tools and materials before you begin the move.
  • Be careful not to drop the toilet, as this could damage the toilet or the floor.
  • Test the toilet after you have installed it to make sure that

Moving the Toilet

Moving a toilet is a relatively simple task, but it does require some planning and care. Here are the steps involved in moving a toilet:

1. Turn off the water supply to the toilet. This is usually located behind the toilet, near the floor. Turn the valve clockwise until it is completely closed.
2. Disconnect the water supply line and the drain line. The water supply line is usually a flexible hose that connects to the bottom of the toilet tank. The drain line is a PVC pipe that connects to the bottom of the toilet bowl. To disconnect the water supply line, simply unscrew the nut that connects it to the toilet tank. To disconnect the drain line, use a hacksaw to cut the pipe as close to the toilet as possible.
3. Carefully lift the toilet and move it to the new location. Be careful not to drop the toilet, as this could damage the bowl or tank. If you are moving the toilet up or down stairs, it is best to use a hand truck or dolly.
4. Connect the water supply line and the drain line. Make sure that the water supply line is tight and that the drain line is properly inserted into the toilet.
5. Reinstall the toilet seat. Make sure that the toilet seat is properly aligned and that the bolts are tightened securely.
6. Turn on the water supply to the toilet. Flush the toilet to make sure that there are no leaks.

Testing the Toilet

Once you have moved the toilet, it is important to test it to make sure that it is working properly. Here are a few things to check:

  • Flush the toilet and check for leaks. There should be no water leaking from the toilet bowl or the water supply line.
  • Make sure the toilet is properly aligned and level. The toilet should be level from front to back and side to side. If the toilet is not level, it will not flush properly.
  • Check the water level in the toilet tank. The water level should be about 1 inch below the top of the overflow tube. If the water level is too high, it could cause the toilet to overflow. If the water level is too low, the toilet may not flush properly.

If you find any problems with the toilet, you may need to adjust the toilet flange or the toilet bolts. If you are unable to fix the problem, you may need to call a plumber.

Moving a toilet is a relatively simple task, but it does require some planning and care. By following these steps, you can safely and successfully move your toilet to a new location.

How to Move a Toilet?

Q: What are the steps involved in moving a toilet?

A: The steps involved in moving a toilet are as follows:

1. Turn off the water supply to the toilet. This can be done by turning the shut-off valve located under the sink or behind the toilet clockwise until it is closed.
2. Flush the toilet to drain any remaining water.
3. Disconnect the water supply line. The water supply line is located on the back of the toilet and is connected to the toilet with a compression fitting. To disconnect the water supply line, use a wrench to loosen the nut on the compression fitting.
4. Disconnect the drain line. The drain line is located on the bottom of the toilet and is connected to the toilet with a slip joint coupling. To disconnect the drain line, use a wrench to loosen the nut on the slip joint coupling.
5. Remove the toilet bolts. The toilet bolts are located on the bottom of the toilet and are used to secure the toilet to the floor. To remove the toilet bolts, use a wrench to loosen the nuts on the bolts.
6. Lift the toilet off the floor. Once the toilet bolts are removed, you can lift the toilet off the floor. Be careful not to damage the toilet bowl or tank.
7. Move the toilet to its new location. Once the toilet is lifted off the floor, you can move it to its new location. Be careful not to drop the toilet.
8. Reinstall the toilet. To reinstall the toilet, follow the steps above in reverse order.

Q: What tools do I need to move a toilet?

A: The tools you need to move a toilet are as follows:

  • A wrench
  • A pair of pliers
  • A bucket
  • A shop vac
  • A putty knife
  • A caulking gun
  • A new wax ring

Q: How much does it cost to move a toilet?

The cost of moving a toilet will vary depending on the size and location of the toilet, as well as the cost of labor. The average cost of moving a toilet is between $100 and $200.

Q: How long does it take to move a toilet?

The amount of time it takes to move a toilet will vary depending on the size and location of the toilet, as well as the experience of the person doing the work. The average time to move a toilet is between 1 and 2 hours.

Q: What are the risks involved in moving a toilet?

There are a few risks involved in moving a toilet, including:

  • Damaging the toilet bowl or tank
  • Dropping the toilet and causing injury
  • Flooding the bathroom
  • Spreading mold or mildew

Q: How can I avoid risks when moving a toilet?

To avoid risks when moving a toilet, you can take the following precautions:

  • Use caution when lifting the toilet
  • Be careful not to drop the toilet
  • Place a bucket under the toilet to catch any leaks
  • Use a shop vac to clean up any spills
  • Caulk around the base of the toilet to prevent leaks

Q: What are the benefits of moving a toilet?

There are a few benefits to moving a toilet, including:

  • Improved bathroom layout
  • Increased accessibility
  • Increased privacy
  • Increased resale value

Q: Is it possible to move a toilet without a plumber?

It is possible to move a toilet without a plumber, but it is important to be careful and to follow the steps above in order to avoid damaging the toilet or causing injury. If you are not comfortable doing the work yourself, you can hire a plumber to do the job for you.

Moving a toilet is a major undertaking, but it is possible to do it yourself if you are prepared and have the right tools. In this comprehensive guide, we have outlined all the steps involved in moving a toilet, from start to finish. We have also provided tips and advice to help you avoid common mistakes.

By following these steps, you can successfully move your toilet and avoid any major problems. However, if you are unsure about any of the steps, or if you are uncomfortable working with plumbing, it is always best to hire a professional plumber.

Here are the key takeaways from this guide:

  • Before you start, make sure you have the right tools and materials.
  • Turn off the water supply to the toilet and flush the toilet to drain the water.
  • Remove the toilet bolts and nuts.
  • Carefully disconnect the water supply line and the drain line.
  • Lift the toilet out of the toilet bowl.
  • Set the toilet in its new location.
  • Connect the water supply line and the drain line.
  • Secure the toilet to the floor with the toilet bolts and nuts.
  • Turn on the water supply to the toilet and flush the toilet to check for leaks.

Author Profile

Liana Farrell
Liana Farrell
Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.

Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”

Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.