How to Convert a Shower into a Bathtub (Step-by-Step Guide)

How to Make a Shower Into a Bathtub

Do you have a shower but no bathtub? Or maybe your bathtub is old and in need of replacement. If so, you may be wondering if it’s possible to convert your shower into a bathtub. The good news is that it is possible, and it’s not as difficult as you might think.

In this article, we’ll walk you through the steps of converting a shower into a bathtub. We’ll provide detailed instructions and tips, so you can get the job done quickly and easily.

So if you’re ready to give your bathroom a makeover, read on for all the information you need to know about converting a shower into a bathtub.

How To Make A Shower Into A Bathtub?

| Step | Action | Result |
|—|—|—|
| 1 | Remove the shower head and any other fixtures from the shower. | This will give you access to the plumbing behind the shower. |
| 2 | Cut the water supply lines to the shower. | You will need to turn off the water to the shower before you do this. |
| 3 | Remove the shower drain. | This will allow you to drain the water from the shower. |
| 4 | Install a bathtub drain. | This will allow you to drain the water from the bathtub. |
| 5 | Install a bathtub faucet. | This will allow you to fill the bathtub with water. |
| 6 | Install a bathtub showerhead. | This will allow you to shower in the bathtub. |
| 7 | Reseal the shower pan. | This will prevent water from leaking from the bathtub. |
| 8 | Reinstall the shower curtain and any other fixtures. | This will finish the transformation of your shower into a bathtub. |

**

A shower can be a convenient way to get clean, but it can also be a waste of water. If you’re looking for a way to save water, you may want to consider converting your shower into a bathtub. This can be a relatively simple project, and it can save you money on your water bill in the long run.

In this guide, we will show you how to convert a shower into a bathtub. We will provide step-by-step instructions, as well as tips and advice. We will also discuss the pros and cons of converting a shower into a bathtub.

**

Gather Materials and Tools

The following materials and tools are needed to convert a shower into a bathtub:

• Shower curtain liner
• Bathtub liner
• Tape measure
• Utility knife
• Safety goggles
• Hammer
• Nails
• Pliers
• Screwdriver
• Level
• Tape

**

Prepare the Shower

Before you can convert your shower into a bathtub, you need to prepare the shower. This involves removing the shower curtain and rod, as well as the shower door, if there is one. You also need to clean the shower thoroughly.

To remove the shower curtain and rod, simply unscrew the brackets that hold them in place. To remove the shower door, you will need to remove the screws that hold it in place. Once the shower curtain, rod, and door are removed, you can clean the shower thoroughly.

**

Install the Bathtub Liner

The next step is to install the bathtub liner. The bathtub liner is a waterproof sheet that will protect the floor of your shower from water damage. To install the bathtub liner, you will need to measure the floor of your shower and cut the liner to size. Once the liner is cut to size, you can install it by adhering it to the floor of the shower with adhesive.

**

Install the Shower Curtain Rod

Once the bathtub liner is installed, you can install the shower curtain rod. The shower curtain rod will hold the shower curtain in place and keep water from splashing out of the shower. To install the shower curtain rod, you will need to measure the width of your shower and cut the rod to size. Once the rod is cut to size, you can install it by screwing it into the wall.

**

Install the Shower Curtain

The final step is to install the shower curtain. The shower curtain will keep water from splashing out of the shower and will provide privacy. To install the shower curtain, you will need to hang it on the shower curtain rod.

**

Converting a shower into a bathtub is a relatively simple project that can be completed in a few hours. By following the steps in this guide, you can save water and money on your water bill.

Here are some additional tips for converting a shower into a bathtub:

• Use a bathtub liner that is made of a durable material. This will help to protect the floor of your shower from water damage.
• Make sure that the shower curtain rod is installed securely. This will prevent the shower curtain from falling down and causing an accident.
• Choose a shower curtain that is long enough to cover the entire bathtub. This will help to keep water from splashing out of the bathtub.

By following these tips, you can easily convert your shower into a bathtub that is both stylish and functional.

3. Install the Bathtub Liner

To install the bathtub liner, you will need:

• A bathtub liner
• A utility knife
• A measuring tape
• A pencil
• Silicone sealant
• A caulking gun

1. Cut the bathtub liner to size.

Measure the inside of your bathtub and cut the bathtub liner to size. Be sure to leave a few inches of extra liner on all sides so that you can fold it over the edge of the bathtub.

2. Apply a bead of silicone sealant around the perimeter of the bathtub.

Use a caulking gun to apply a bead of silicone sealant around the perimeter of the bathtub. Be sure to apply the sealant evenly and to create a continuous seal.

3. Place the bathtub liner in the bathtub and press it into place.

Gently place the bathtub liner in the bathtub and press it into place. Be sure to smooth out any wrinkles or folds in the liner.

4. Use a utility knife to trim the excess liner.

Use a utility knife to trim the excess liner around the edge of the bathtub. Be sure to cut the liner as close to the edge of the bathtub as possible.

4. Install the Shower Curtain

To install the shower curtain, you will need:

• A shower curtain rod
• A shower curtain
• A shower curtain liner
• A shower curtain hook
• A screwdriver

1. Hang the shower curtain rod on the shower wall.

Measure the height of your shower and attach the shower curtain rod to the shower wall using the screws provided. Be sure to attach the shower curtain rod at least 7 inches above the showerhead.

2. Hang the shower curtain on the rod.

Hook the shower curtain hooks onto the shower curtain rod. Be sure to hang the shower curtain so that it is level and hangs evenly.

3. Install the shower curtain liner.

Slide the shower curtain liner inside the shower curtain. Be sure to smooth out any wrinkles or folds in the liner.

By following these steps, you can easily turn your shower into a bathtub. This is a great option if you need to take a bath but don’t have a bathtub in your home.

Q: How do I convert a shower into a bathtub?

A: Converting a shower into a bathtub is a relatively simple process, but it does require some planning and preparation. Here are the steps involved:

1. Remove the shower stall. This may involve removing the shower base, shower walls, and shower door. If you are not comfortable doing this yourself, you can hire a professional to do it for you.
2. Install a bathtub. The size of the bathtub you choose will depend on the size of your bathroom. You will also need to choose a bathtub that fits in the space where the shower stall was located.
3. Connect the bathtub to the plumbing. This involves connecting the bathtub drain to the sewer line and connecting the bathtub faucet to the hot and cold water supply lines.
4. Install a shower curtain rod. This will allow you to use the bathtub as a shower if desired.
5. Tile the floor around the bathtub. This will help to protect the floor from water damage.

Once you have completed these steps, you will have successfully converted your shower into a bathtub.

Q: What are the benefits of converting a shower into a bathtub?

A: There are several benefits to converting a shower into a bathtub, including:

• More space. A bathtub takes up more space than a shower, so converting a shower into a bathtub can give you more space in your bathroom.
• Comfort. A bathtub is more comfortable to sit in than a shower, especially for people who have difficulty standing for long periods of time.
• Hygiene. A bathtub is easier to clean than a shower, as all of the water stays inside the tub.
• Safety. A bathtub is safer for children and elderly people than a shower, as there is less risk of slipping and falling.

Q: What are the drawbacks of converting a shower into a bathtub?

A: There are a few drawbacks to converting a shower into a bathtub, including:

• Cost. Converting a shower into a bathtub can be more expensive than simply installing a new shower.
• Time. Converting a shower into a bathtub can take more time than simply installing a new shower.
• Inconvenience. Converting a shower into a bathtub can be inconvenient, as you will have to do without a shower for a period of time.

Q: How can I make the conversion process as smooth as possible?

A: There are a few things you can do to make the conversion process as smooth as possible, including:

• Plan ahead. Before you start the conversion process, make sure you have a plan in place. This will help you to avoid any unexpected problems.
• Hire a professional. If you are not comfortable doing the conversion yourself, you can hire a professional to do it for you. This will ensure that the job is done correctly and safely.
• Be patient. The conversion process can take some time, so be patient and don’t get discouraged.

By following these tips, you can make the conversion process as smooth as possible.

In this article, we have discussed how to turn a shower into a bathtub. We have covered the steps involved in the process, as well as the materials and tools you will need. We have also provided tips on how to make the conversion as seamless as possible.

We hope that this article has been helpful and that you are now able to turn your shower into a bathtub. If you have any questions or comments, please feel free to leave them below.