How to Install a Tub Shower Faucet: A Step-by-Step Guide

AvatarByLiana Farrell Faucet Queries

How to Install a Tub Shower Faucet

A tub shower faucet is a great way to add convenience and style to your bathroom. It allows you to easily switch between taking a bath and a shower, and it can also provide a more luxurious bathing experience. If you’re thinking about installing a tub shower faucet yourself, this guide will walk you through the process step-by-step.

We’ll cover everything you need to know, from choosing the right faucet for your needs to installing it correctly. By the end of this guide, you’ll be able to install a tub shower faucet like a pro.

Step Tools Instructions
1 Plumber’s wrench, screwdriver, tape measure, pencil Turn off the water supply to the tub/shower faucet. Locate the shut-off valves under the sink or behind the toilet. Turn the valves clockwise until they are completely closed.
2 Plumber’s putty, new tub/shower faucet Remove the old faucet by unscrewing the nuts that hold it in place. Apply a small amount of plumber’s putty to the threads of the new faucet.
3 Faucet wrench Hand-tighten the new faucet to the pipes. Use a faucet wrench to tighten the nuts until they are snug.
4 Water supply valves Turn on the water supply to the tub/shower faucet. Check for leaks around the faucet.

A tub shower faucet is a type of faucet that allows you to control the flow of both hot and cold water to your shower. It is typically installed on the wall of your shower enclosure, and it can be either a single-handle or a double-handle faucet.

Installing a tub shower faucet is a relatively simple task, but it is important to follow the instructions carefully to ensure that the faucet is installed correctly. In this guide, we will walk you through the steps of installing a tub shower faucet, from start to finish.

Tools and Materials

The following tools and materials are required to install a tub shower faucet:

  • Tub shower faucet
  • Tape measure
  • Pencil
  • Combination/socket wrench
  • Pliers
  • Pipe sealant
  • Tub spout
  • Supply lines
  • Drain assembly

Preparation

Before you begin installing the tub shower faucet, you will need to prepare the area around the faucet. This includes turning off the water supply to the tub, draining the water from the tub, and removing the old faucet.

To turn off the water supply to the tub, locate the shut-off valve near the tub. This valve is typically located behind the shower wall or under the sink. Turn the valve clockwise to turn off the water supply to the tub.

To drain the water from the tub, open the drain and allow the water to drain out. You may need to use a plunger to help drain the water.

To remove the old faucet, you will need to remove the screws that hold the faucet in place. These screws are typically located on the back of the faucet. Once the screws are removed, you can carefully pull the faucet away from the wall.

Installation

Now that you have prepared the area around the faucet, you can begin the installation process. The following steps will walk you through the process of installing a tub shower faucet:

1. Position the faucet. The first step is to position the faucet on the wall. The faucet should be centered on the wall and about 12 inches above the tub spout.
2. Mark the holes. Once you have positioned the faucet, you will need to mark the holes for the faucet. Use a pencil to mark the location of the holes on the wall.
3. Drill the holes. Use a drill to drill the holes for the faucet. The holes should be about 1 inch deep.
4. Insert the anchors. Insert the anchors into the holes in the wall.
5. Attach the faucet. Attach the faucet to the wall using the screws that came with the faucet.
6. Connect the supply lines. Connect the supply lines to the faucet. The supply lines should be connected to the hot and cold water supply valves.
7. Install the drain assembly. Install the drain assembly in the drain of the tub.
8. Turn on the water supply. Turn on the water supply to the tub and check for leaks.

Installing a tub shower faucet is a relatively simple task, but it is important to follow the instructions carefully to ensure that the faucet is installed correctly. By following the steps in this guide, you can easily install a tub shower faucet in your home.

Additional Tips

Here are a few additional tips that will help you install a tub shower faucet:

  • Use a level to make sure that the faucet is installed level.
  • Use plumber’s putty around the base of the faucet to create a watertight seal.
  • Tighten the screws that hold the faucet in place securely.
  • Test the faucet to make sure that it is working properly.

3. Installation

To install a tub shower faucet, you will need the following tools and materials:

  • New tub shower faucet
  • Tape measure
  • Pencil
  • Level
  • Combination/socket wrench
  • Pliers
  • Pipe wrench
  • Plumber’s putty
  • Silicone sealant
  • Teflon tape
  • Penetrating oil
  • Rags

Step 1: Remove the old faucet

To begin, you will need to remove the old faucet. To do this, you will need to turn off the water supply to the tub. You can usually find the water supply valves behind the faucet or under the sink. Once the water supply is turned off, you will need to remove the screws that hold the faucet in place. These screws are usually located behind the handle or on the bottom of the faucet. Once the screws are removed, you can carefully pull the faucet away from the wall.

Step 2: Prepare the new faucet

Before you install the new faucet, you will need to prepare it by attaching the supply lines and the drain assembly. The supply lines are the pipes that connect the faucet to the water supply. The drain assembly is the part of the faucet that connects to the drain.

To attach the supply lines, you will need to first cut the ends of the pipes to the correct length. You can then attach the supply lines to the faucet using the provided fittings. The drain assembly is usually attached to the faucet using a setscrew.

Step 3: Install the new faucet

Once the new faucet is prepared, you can install it on the wall. To do this, you will need to first apply a bead of plumber’s putty around the base of the faucet. This will help to create a seal between the faucet and the wall. You can then place the faucet on the wall and tighten the screws that hold it in place.

Step 4: Connect the supply lines

Once the faucet is installed, you can connect the supply lines. To do this, you will need to first turn on the water supply to the tub. You can then connect the supply lines to the faucet using the provided fittings. Make sure that the supply lines are tight so that there is no leaks.

Step 5: Connect the drain assembly

Once the supply lines are connected, you can connect the drain assembly. To do this, you will need to first remove the old drain assembly. You can usually do this by unscrewing the setscrew that holds it in place. You can then connect the new drain assembly to the faucet using the provided fittings. Make sure that the drain assembly is tight so that there is no leaks.

Step 6: Turn on the water supply

Once the drain assembly is connected, you can turn on the water supply to the tub. You should check for any leaks around the faucet or the drain assembly. If you find any leaks, you can tighten the fittings until the leaks stop.

Step 7: Test the faucet

Once you have finished installing the faucet, you can test it to make sure that it is working properly. To do this, you can turn on the water to the tub and check for any leaks. You can also turn on the shower and check to make sure that the water is flowing properly.

Step 8: Clean up the area

Once you have finished testing the faucet, you can clean up the area around the faucet. You can use a rag to wipe up any dirt or debris. You can also use a plumber’s putty knife to remove any excess plumber’s putty.

Step 9: Replace the tub spout

If you are replacing an old tub shower faucet, you will need to replace the tub spout. To do this, you will need to first remove the old tub spout. You can usually do this by unscrewing the setscrew that holds it in place. You can then install the new tub spout by screwing it into place.

Step 10: Enjoy your new tub shower faucet!

Now that you have installed your new tub shower faucet, you can enjoy all of the benefits that it has to offer. You can take long, relaxing showers or soak in the tub after a long day. Your new tub shower faucet will make your bathroom experience more enjoyable than ever before.

4. Final Steps

Once you have finished installing your new tub shower faucet, there are a few final steps that you need to take. These steps include:

  • Cleaning up the area around the faucet.
  • Replacing the tub spout.
  • Enjoying your new tub shower faucet!

Cleaning up the area around the faucet

After you have finished installing your new tub shower faucet

Q: What tools do I need to install a tub shower faucet?

A: You will need the following tools:

  • A wrench
  • A screwdriver
  • A tape measure
  • A level
  • A pencil
  • A bucket
  • A sponge
  • A pair of pliers

Q: How do I remove the old faucet?

A: To remove the old faucet, you will need to:

1. Turn off the water supply to the faucet.
2. Disconnect the hot and cold water supply lines from the faucet.
3. Remove the screws that hold the faucet to the sink or tub.
4. Pull the faucet straight out.

Q: How do I install the new faucet?

A: To install the new faucet, you will need to:

1. Apply a bead of plumber’s putty to the bottom of the faucet base.
2. Center the faucet on the sink or tub and attach it with the screws provided.
3. Connect the hot and cold water supply lines to the faucet.
4. Turn on the water supply to the faucet and check for leaks.

Q: What is the best way to prevent leaks?

A: To prevent leaks, you should:

  • Make sure that all of the connections are tight.
  • Use plumber’s putty to seal any gaps between the faucet and the sink or tub.
  • Check for leaks regularly and fix them as soon as possible.

Q: What are some common problems with tub shower faucets?

A: Some common problems with tub shower faucets include:

  • Leaks
  • Faucets that don’t turn on or off properly
  • Faucets that drip
  • Faucets that are difficult to operate

Q: How can I fix a leaky tub shower faucet?

There are a few ways to fix a leaky tub shower faucet. You can:

  • Tighten the connections between the faucet and the sink or tub.
  • Replace the O-rings in the faucet.
  • Replace the faucet cartridge.

Q: How can I fix a faucet that doesn’t turn on or off properly?

There are a few ways to fix a faucet that doesn’t turn on or off properly. You can:

  • Clean the faucet aerator.
  • Replace the faucet cartridge.
  • Replace the faucet valve.

Q: How can I fix a faucet that drips?

There are a few ways to fix a faucet that drips. You can:

  • Tighten the screws on the faucet handle.
  • Replace the O-rings in the faucet.
  • Replace the faucet cartridge.

Q: How can I make a faucet easier to operate?

There are a few ways to make a faucet easier to operate. You can:

  • Replace the faucet handle with a new one that is easier to grip.
  • Add a faucet extender to make the faucet taller.
  • Install a faucet with a touchless sensor.

    Installing a tub shower faucet is a relatively simple task that can be completed in a few hours. By following the steps in this guide, you can have a new faucet installed in your bathtub in no time.

Here are the key takeaways from this guide:

  • Before you begin, make sure you have all of the necessary tools and materials.
  • Turn off the water supply to the bathtub and drain the water from the pipes.
  • Remove the old faucet by unscrewing the mounting nuts and washers.
  • Install the new faucet by following the manufacturer’s instructions.
  • Turn on the water supply to the bathtub and test the faucet to make sure it is working properly.

By following these steps, you can easily install a new tub shower faucet in your home.

Author Profile

Liana Farrell
Liana Farrell
Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.

Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”

Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.