How to Install a Toilet Paper Holder Without Screws

AvatarByLiana Farrell Toilet Queries

How to Install a Toilet Paper Holder Without Screws

Toilet paper holders are a must-have for any bathroom, but they can be a pain to install if you don’t have the right tools or skills. If you’re looking for a way to install a toilet paper holder without using screws, there are a few different methods you can try.

In this article, we’ll walk you through the steps of installing a toilet paper holder without screws, using two different methods. We’ll also provide tips on how to choose the right toilet paper holder for your bathroom and how to install it correctly.

So whether you’re renting an apartment and don’t want to damage the walls, or you’re just looking for a quick and easy way to install a toilet paper holder, read on for all the information you need.

Step Materials Instructions
1 Toilet paper holder Clean the area where you will be installing the toilet paper holder.
2 Double-sided tape Apply double-sided tape to the back of the toilet paper holder.
3 Press the toilet paper holder firmly onto the wall. Hold the toilet paper holder in place for a few seconds to make sure it is secure.

Toilet paper holders are a necessity in any bathroom, but they can be difficult to install if you don’t have the right tools or skills. If you’re looking for a way to install a toilet paper holder without using screws, there are a few different methods you can use.

In this article, we’ll show you how to install a toilet paper holder without screws using two different methods:

  • Using adhesive strips
  • Using a toggle bolt

Both of these methods are quick and easy, and they don’t require any drilling or special tools.

Method 1: Using Adhesive Strips

Adhesive strips are a great option for installing a toilet paper holder if you don’t want to damage the wall. They’re easy to use, and they’ll hold the toilet paper holder in place securely.

To install a toilet paper holder using adhesive strips, you’ll need the following materials:

  • Toilet paper holder
  • Adhesive strips
  • Tape measure
  • Level
  • Pencil

Step 1: Measure and mark the location of the toilet paper holder.

The toilet paper holder should be placed approximately 24 inches above the floor and 6 inches to the left or right of the toilet. Use a level to make sure the marks are level.

Step 2: Mark the location of the holes for the adhesive strips.

The adhesive strips should be placed on the back of the toilet paper holder, approximately 2 inches from each edge. Use a pencil to mark the location of the holes for the adhesive strips.

Step 3: Peel off the backing of the adhesive strips and attach the toilet paper holder to the wall.

Press the toilet paper holder firmly against the wall for a few seconds to make sure the adhesive strips are secure.

Step 4: Hang the toilet paper roll on the holder.

Your toilet paper holder is now installed!

Method 2: Using a Toggle Bolt

Toggle bolts are a great option for installing a toilet paper holder if you have a concrete or masonry wall. They’re strong and durable, and they’ll hold the toilet paper holder in place securely.

To install a toilet paper holder using a toggle bolt, you’ll need the following materials:

  • Toilet paper holder
  • Toggle bolts
  • Drill
  • 1/8-inch drill bit
  • 1-inch screws
  • Level
  • Pencil

Step 1: Measure and mark the location of the toilet paper holder.

The toilet paper holder should be placed approximately 24 inches above the floor and 6 inches to the left or right of the toilet. Use a level to make sure the marks are level.

Step 2: Drill a hole in the wall.

Use a drill to drill a hole in the wall at the marked location. The hole should be large enough to accommodate the toggle bolt.

Step 3: Insert the toggle bolt into the hole.

Insert the toggle bolt into the hole in the wall. Make sure that the wings of the toggle bolt are facing out.

Step 4: Screw the toilet paper holder to the toggle bolt.

Use the screws to attach the toilet paper holder to the toggle bolt.

Step 5: Hang the toilet paper roll on the holder.

Your toilet paper holder is now installed!

Installing a toilet paper holder without screws is easy and can be done in just a few minutes. By following these two methods, you can have a new toilet paper holder up in no time.

Here are some additional tips for installing a toilet paper holder without screws:

  • Make sure the wall is strong enough to support the weight of the toilet paper holder.
  • Use a level to make sure the toilet paper holder is level.
  • Tighten the screws or adhesive strips securely to prevent the toilet paper holder from coming loose.

With a little bit of effort, you can easily install a toilet paper holder without screws.

How To Install Toilet Paper Holder Without Screws?

Toilet paper holders are a necessity in any bathroom, but they can be a pain to install if you don’t have a drill or other tools. If you’re looking for a way to install a toilet paper holder without screws, there are a few different methods you can use.

Method 1: Using adhesive strips

Adhesive strips are a quick and easy way to install a toilet paper holder without screws. Simply follow these steps:

1. Choose a location for the toilet paper holder. The toilet paper holder should be placed at a height that is comfortable for you to reach. It should also be placed in a location where it is not blocking the toilet or the sink.
2. Clean the surface of the wall where you will be installing the toilet paper holder. Make sure the surface is free of dust, dirt, and grease.
3. Peel the backing off of the adhesive strips and attach them to the back of the toilet paper holder. Make sure the adhesive strips are firmly attached to the toilet paper holder.
4. Press the toilet paper holder firmly against the wall. Hold the toilet paper holder in place for a few seconds to make sure the adhesive strips have adhered to the wall.

Method 2: Using a command hook

Command hooks are another easy way to install a toilet paper holder without screws. Simply follow these steps:

1. Choose a location for the toilet paper holder. The toilet paper holder should be placed at a height that is comfortable for you to reach. It should also be placed in a location where it is not blocking the toilet or the sink.
2. Clean the surface of the wall where you will be installing the toilet paper holder. Make sure the surface is free of dust, dirt, and grease.
3. Attach the command hook to the wall. Make sure the command hook is firmly attached to the wall.
4. Hang the toilet paper holder on the command hook. Make sure the toilet paper holder is hung securely on the command hook.

Method 3: Using a drywall anchor

Drywall anchors are a more permanent way to install a toilet paper holder without screws. Simply follow these steps:

1. Choose a location for the toilet paper holder. The toilet paper holder should be placed at a height that is comfortable for you to reach. It should also be placed in a location where it is not blocking the toilet or the sink.
2. Drill a hole in the wall where you will be installing the toilet paper holder. The hole should be large enough to accommodate the drywall anchor.
3. Insert the drywall anchor into the hole. Make sure the drywall anchor is firmly inserted into the hole.
4. Screw the toilet paper holder onto the drywall anchor. Make sure the toilet paper holder is screwed securely onto the drywall anchor.

These are just a few of the ways you can install a toilet paper holder without screws. With a little creativity, you can easily find a way to install a toilet paper holder that works for your bathroom.

How do I install a toilet paper holder without screws?

There are a few different ways to install a toilet paper holder without screws. Here are two of the most common methods:

1. Use adhesive strips. This is the easiest and most straightforward method. Simply clean the surface of the toilet tank where you want to install the holder, then peel and stick the adhesive strips to the back of the holder. Press firmly for a few seconds to make sure the strips are secure.
2. Use a mounting bracket. A mounting bracket is a metal or plastic bracket that you can attach to the toilet tank with screws or adhesive. Once the bracket is in place, you can simply slide the toilet paper holder onto it.

Here are the steps in more detail:

Method 1: Using adhesive strips

1. Clean the surface of the toilet tank where you want to install the holder.
2. Peel the backing off of the adhesive strips and attach them to the back of the toilet paper holder.
3. Press firmly for a few seconds to make sure the strips are secure.
4. Hang the toilet paper holder on the adhesive strips.

Method 2: Using a mounting bracket

1. Attach the mounting bracket to the toilet tank with screws or adhesive.
2. Slide the toilet paper holder onto the mounting bracket.

Which method is better?

The best method for you will depend on the type of toilet tank you have and your personal preferences. If you have a smooth, non-porous toilet tank, adhesive strips are a good option. If your toilet tank has a textured or porous surface, a mounting bracket is a better choice.

What if I don’t have any adhesive strips or mounting brackets?

If you don’t have any adhesive strips or mounting brackets, you can also use a strong double-sided tape to attach the toilet paper holder to the toilet tank. Just be sure to use a tape that is strong enough to hold the weight of the toilet paper holder.

How do I remove a toilet paper holder without damaging the toilet tank?

To remove a toilet paper holder without damaging the toilet tank, you can use a hair dryer to heat up the adhesive strips or mounting bracket. Once the adhesive is heated, you can carefully pry the toilet paper holder off of the tank. Be careful not to damage the tank with the prying tool.

Can I install a toilet paper holder on a wall?

Yes, you can install a toilet paper holder on a wall. To do this, you will need to purchase a wall-mounted toilet paper holder and attach it to the wall with screws or adhesive.

What is the best height for a toilet paper holder?

The best height for a toilet paper holder is at about 28 inches from the floor. This will make it easy for people of all heights to reach the toilet paper.

Can I install a toilet paper holder with a bidet?

Yes, you can install a toilet paper holder with a bidet. To do this, you will need to purchase a toilet paper holder that is specifically designed for use with a bidet. These toilet paper holders are typically installed on the side of the toilet tank, next to the bidet.

In this article, we have discussed how to install a toilet paper holder without screws. We have covered the different types of toilet paper holders that can be installed without screws, as well as the steps involved in each installation method. We have also provided tips for choosing the right toilet paper holder for your bathroom and for ensuring that the installation is secure.

We hope that this article has been helpful and that you are now able to install a toilet paper holder without screws. If you have any questions or need further assistance, please do not hesitate to contact us.

Author Profile

Liana Farrell
Liana Farrell
Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.

Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”

Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.