How to Install an Upflush Toilet (The Complete Guide)

AvatarByLiana Farrell Toilet Queries

How to Install an Upflush Toilet

If you’re looking for a way to add a toilet to a basement or other area without a traditional plumbing setup, an upflush toilet is a great option. Upflush toilets are also known as macerating toilets or pressure-assisted toilets. They work by using a pump to macerate, or grind up, the waste into a fine slurry that can then be flushed through a small drain pipe.

Installing an upflush toilet is a relatively simple process, but there are a few things you need to know before you get started. In this article, we’ll walk you through the steps of installing an upflush toilet, from choosing the right toilet to connecting it to your plumbing system.

We’ll also provide tips on how to make sure your upflush toilet is installed correctly and works properly. So whether you’re a DIYer or you’re hiring a professional, read on for all the information you need to know about installing an upflush toilet.

Step Instructions Image
1 Turn off the water supply to the toilet.
2 Disconnect the water supply line from the toilet.
3 Remove the toilet from the floor.
4 Install the upflush toilet in the same location as the old toilet.
5 Connect the water supply line to the upflush toilet.
6 Turn on the water supply to the upflush toilet.
7 Test the upflush toilet to make sure it is working properly.

How to Install an Upflush Toilet?

Preparing for the Installation

Before you can install an upflush toilet, you need to gather the necessary tools and materials. You will need:

  • A new upflush toilet
  • A flange adapter
  • A wax ring
  • A toilet bowl gasket
  • A toilet tank gasket
  • A toilet seat
  • A toilet seat mounting hardware kit
  • A hacksaw
  • A screwdriver
  • A wrench
  • A level
  • A bucket
  • Plumbing tape
  • Silicone sealant

You will also need to determine the best location for the toilet. The toilet should be installed in a location that is convenient for use and that has access to a water supply and a drain. The toilet should also be installed on a level surface.

Once you have gathered the necessary tools and materials and determined the best location for the toilet, you can begin preparing the plumbing and electrical connections.

Installing the Toilet

To install the toilet, follow these steps:

1. Connect the toilet to the plumbing and electrical systems.
2. Secure the toilet to the floor.
3. Connect the water supply line.
4. Add water to the tank.

Connecting the Toilet to the Plumbing and Electrical Systems

The first step in installing an upflush toilet is to connect it to the plumbing and electrical systems.

To connect the toilet to the plumbing system, you will need to:

1. Cut a hole in the floor of the bathroom where the toilet will be installed. The hole should be large enough to accommodate the toilet flange.
2. Insert the flange adapter into the hole in the floor.
3. Attach the toilet flange to the flange adapter using screws or bolts.
4. Connect the toilet bowl to the flange using a wax ring.
5. Connect the toilet tank to the toilet bowl using a toilet tank gasket.

To connect the toilet to the electrical system, you will need to:

1. Determine the location of the electrical outlet for the toilet.
2. Run a wire from the electrical outlet to the toilet.
3. Connect the wire to the toilet using a wire connector.

Securing the Toilet to the Floor

Once you have connected the toilet to the plumbing and electrical systems, you need to secure it to the floor.

To secure the toilet to the floor, you will need to:

1. Place the toilet bowl on the flange.
2. Apply silicone sealant around the edge of the toilet bowl.
3. Place the toilet tank on the toilet bowl.
4. Secure the toilet to the floor using bolts or screws.

Connecting the Water Supply Line

The final step in installing an upflush toilet is to connect the water supply line.

To connect the water supply line, you will need to:

1. Turn off the water supply to the toilet.
2. Remove the old water supply line.
3. Connect the new water supply line to the toilet.
4. Turn on the water supply to the toilet.

Adding Water to the Tank

The final step in installing an upflush toilet is to add water to the tank.

To add water to the tank, you will need to:

1. Open the fill valve on the toilet.
2. Allow the tank to fill with water.
3. Close the fill valve.

Installing an upflush toilet is a relatively simple task that can be completed by most homeowners. By following the steps in this guide, you can install an upflush toilet in your home in just a few hours.

Here are some additional tips for installing an upflush toilet:

  • Make sure that the toilet is level before you secure it to the floor.
  • Use a sealant around the edge of the toilet bowl to prevent leaks.
  • Tighten the bolts or screws that secure the toilet to the floor until the toilet is secure.
  • Be careful not to overtighten the bolts or screws, as this could damage the toilet.

If you have any questions about installing an upflush toilet, you can contact a qualified plumber for assistance.

3. Testing the Toilet

After you have installed the upflush toilet, it is important to test it to make sure that it is working properly. Here are a few things to check:

  • Flush the toilet to check for leaks. Look around the toilet for any signs of water leaking, such as water pooling under the toilet or water dripping from the tank. If you see any leaks, you will need to tighten the connections or replace the parts that are leaking.
  • Make sure the toilet is properly draining. After you flush the toilet, the water should drain completely from the bowl within a few minutes. If the water is not draining properly, you may need to clean the drain line or replace the toilet flapper.

4. Finishing the Installation

Once you have tested the toilet and made sure that it is working properly, you can finish the installation by replacing the toilet seat and cleaning up the area.

  • Replace the toilet seat. The toilet seat is usually installed with two bolts that go through the holes in the toilet bowl. Once you have removed the old seat, you can install the new seat by inserting the bolts through the holes and tightening them with a wrench.
  • Clean up the area. Once you have finished installing the toilet, you can clean up the area by sweeping up any debris and wiping down the walls and floor.

Installing an upflush toilet is a relatively simple project that can be completed in a few hours. By following these steps, you can install an upflush toilet that will provide you with years of reliable service.

Here are a few additional tips for installing an upflush toilet:

  • Make sure you have the right tools and materials. You will need a wrench, a screwdriver, a level, and a measuring tape. You will also need a new toilet seat and a wax ring.
  • Follow the manufacturer’s instructions carefully. Each upflush toilet is different, so it is important to follow the manufacturer’s instructions carefully to ensure that the toilet is installed correctly.
  • Be patient. Installing an upflush toilet can be a time-consuming process, but it is worth it in the end. By taking your time and following the instructions carefully, you can install an upflush toilet that will provide you with years of reliable service.

    Q: What is an upflush toilet?

A: An upflush toilet, also known as a macerating toilet, is a type of toilet that uses a pump to move waste from the toilet bowl to a holding tank located below the floor. This type of toilet is often used in basements or other areas where there is no access to a sewer line.

Q: What are the advantages of an upflush toilet?
A: There are several advantages to using an upflush toilet, including:

  • They can be installed in areas where there is no access to a sewer line.
  • They are typically more compact than traditional toilets, making them ideal for small spaces.
  • They are often quieter than traditional toilets, as the pump is located below the floor.
  • They are typically more affordable than traditional toilets.

Q: What are the disadvantages of an upflush toilet?
A= There are a few disadvantages to using an upflush toilet, including:

  • They can be more expensive to install than traditional toilets.
  • They require more maintenance than traditional toilets, as the pump needs to be regularly cleaned and serviced.
  • They can be more difficult to repair than traditional toilets.

Q: How do I install an upflush toilet?
A: Installing an upflush toilet is a relatively simple process, but it is important to follow the manufacturer’s instructions carefully. The following steps provide a general overview of the installation process:

1. Locate the drain and vent pipes. The drain pipe will be located below the floor, and the vent pipe will be located near the ceiling.
2. Cut a hole in the floor for the toilet bowl. The hole should be large enough to accommodate the toilet bowl and the flange.
3. Install the toilet bowl flange. The flange will be attached to the floor with bolts.
4. Connect the toilet bowl to the flange. The toilet bowl will be connected to the flange with bolts and a gasket.
5. Connect the toilet bowl to the drain pipe. The toilet bowl will be connected to the drain pipe with a flexible hose.
6. Connect the toilet bowl to the vent pipe. The toilet bowl will be connected to the vent pipe with a flexible hose.
7. Turn on the water supply and flush the toilet. This will ensure that the toilet is properly installed and that there are no leaks.

Q: How do I maintain an upflush toilet?
A: Maintaining an upflush toilet is relatively simple, but it is important to follow the manufacturer’s instructions carefully. The following steps provide a general overview of the maintenance process:

1. Flush the toilet regularly. This will help to prevent clogs and keep the toilet running smoothly.
2. Clean the toilet bowl regularly. This can be done with a toilet brush and a cleaning solution.
3. Clean the pump regularly. The pump can be cleaned by removing it from the toilet and cleaning it with a brush and a cleaning solution.
4. Service the pump regularly. The pump should be serviced by a qualified plumber every few years.

Q: What are some common problems with upflush toilets?
A: There are a few common problems that can occur with upflush toilets, including:

  • Clogs: Clogs can occur in the toilet bowl, the drain pipe, or the vent pipe.
  • Leaks: Leaks can occur at the toilet bowl flange, the drain pipe connection, or the vent pipe connection.
  • Pump failure: The pump can fail due to a variety of reasons, including wear and tear, electrical problems, or blockages.

Q: How do I troubleshoot common problems with upflush toilets?
A: If you are experiencing a problem with your upflush toilet, the following steps can help you troubleshoot the issue:

1. Check for clogs. The first step is to check for clogs in the toilet bowl, the drain pipe, or the vent pipe. If you find a clog, you can try to clear it with a plunger or a drain snake.
2. Check for leaks. The next step is to check for leaks at the toilet bowl flange, the drain pipe connection, or the vent pipe connection. If you find a leak, you can try to fix it with a sealant or a new gasket.
3. Check the pump. If you have checked for clogs and leaks and the problem persists, you should check the pump. The pump can be checked by removing it from the toilet and inspecting it for damage. If the pump is damaged, it will need to be replaced.

installing an upflush toilet is a relatively simple process that can be completed in a few hours. By following the steps outlined in this guide, you can have a new upflush toilet installed in your home in no time.

Here are a few key takeaways from this guide:

  • Upflush toilets are a great option for homes with limited space or for those who want to avoid the hassle of a traditional toilet.
  • Upflush toilets are installed in the basement or crawl space, and the waste is pumped up through a pipe to the main sewer line.
  • The installation process is relatively simple, but it is important to follow the steps carefully to ensure that the toilet is installed correctly.
  • Upflush toilets are a great way to add convenience and functionality to your home.

Author Profile

Liana Farrell
Liana Farrell
Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.

Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”

Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.