How to Flush a Toilet When the Handle is Broken: A Step-by-Step Guide

How to Flush a Toilet When the Handle Is Broken

A broken toilet handle can be a major inconvenience, but it’s not a difficult problem to fix. In this article, we’ll show you how to flush a toilet with a broken handle in just a few simple steps.

We’ll also provide some tips on how to prevent your toilet handle from breaking in the future. So whether you’re dealing with a broken toilet handle right now or you’re just looking to stay ahead of the game, read on for all the information you need!

Step	Instructions	Image
1	Use a plunger to clear the clog.
2	If the plunger doesn’t work, try using a toilet auger.
3	If the auger doesn’t work, you may need to call a plumber.

How To Flush Toilet When Handle Is Broken?

Identify the Type of Toilet Handle

The first step is to identify the type of toilet handle you have. There are two main types of toilet handles:

• Lift-and-turn handles: These handles are typically found on older toilets. To flush the toilet, you lift the handle up and then turn it clockwise.
• Push-button handles: These handles are more common on newer toilets. To flush the toilet, you simply push the button.

Once you have identified the type of toilet handle you have, you can proceed to the next step.

Determine the Cause of the Broken Handle

There are a few different reasons why a toilet handle might break, including:

• The handle is old and worn out. Over time, the materials used to make a toilet handle can become brittle and break. This is especially common in older toilets.
• The handle is made of a cheap material that is prone to breaking. Some toilet handles are made of cheap materials that are not very durable. This can lead to the handle breaking easily, even if it is not very old.
• The handle has been damaged by rust or corrosion. If a toilet handle is exposed to moisture for a long period of time, it can rust or corrode. This can weaken the handle and make it more likely to break.

Once you have determined the cause of the broken handle, you can proceed to the next step.

Fix the Broken Toilet Handle

There are a few different ways to fix a broken toilet handle. The best way to fix the handle will depend on the type of handle you have and the cause of the break.

Lift-and-turn handles

If you have a lift-and-turn toilet handle, you can usually fix it by replacing the handle. To do this, you will need to remove the old handle and install a new one.

To remove the old handle, you will need to:

1. Turn off the water supply to the toilet.
2. Remove the cap on the back of the toilet tank.
3. Unscrew the nut that is holding the handle in place.
4. Pull the handle out of the tank.

To install the new handle, you will need to:

1. Place the new handle in the hole in the tank.
2. Screw the nut onto the back of the handle to secure it in place.
3. Replace the cap on the back of the tank.
4. Turn the water supply back on to the toilet.

Push-button handles

If you have a push-button toilet handle, you can usually fix it by replacing the button. To do this, you will need to:

1. Turn off the water supply to the toilet.
2. Remove the cap on the top of the toilet tank.
3. Remove the old button.
4. Install the new button.
5. Replace the cap on the top of the toilet tank.
6. Turn the water supply back on to the toilet.

Other methods

In some cases, you may be able to fix a broken toilet handle without replacing it. For example, if the handle is simply loose, you may be able to tighten it by turning the nut on the back of the handle. If the handle is broken off, you may be able to repair it by using a piece of wire or a zip tie.

If you are not able to fix the broken toilet handle yourself, you can always call a plumber to do it for you.

Flushing a toilet with a broken handle can be a challenge, but it is definitely possible. By following these steps, you can safely and easily flush your toilet without a handle.

Here are some additional tips for flushing a toilet with a broken handle:

• Use a plunger to help create suction and flush the toilet.
• If the toilet is clogged, you may need to use a toilet auger to clear the clog before you can flush it.
• If you are unable to flush the toilet, you can always call a plumber for help.

How To Flush Toilet When Handle Is Broken?

A broken toilet handle can be a major inconvenience, but it is usually a simple fix. In this guide, we will show you how to flush a toilet with a broken handle.

What You Will Need

• A plunger
• A bucket
• A screwdriver
• A new toilet handle (if needed)

Step 1: Turn Off the Water Supply

The first step is to turn off the water supply to the toilet. This will prevent any water from overflowing the toilet bowl. To do this, locate the water supply valve under the sink or behind the toilet. Turn the valve clockwise until it is completely closed.

Step 2: Flush the Toilet

Once the water supply is turned off, you can flush the toilet. To do this, fill a bucket with water and pour it into the toilet bowl. This will help to clear any debris that may be blocking the drain.

Step 3: Remove the Old Handle

If the toilet handle is still attached to the toilet, you will need to remove it before you can install the new one. To do this, use a screwdriver to loosen the screws that hold the handle in place. Once the screws are loosened, you can pull the handle off of the toilet.

Step 4: Install the New Handle

If you are replacing the entire handle, you can simply attach the new handle to the toilet using the screws that came with the new handle. If you are only replacing the handle stem or the handle nut, you will need to remove the old stem or nut before you can install the new one.

To remove the old stem, use a screwdriver to loosen the nut that holds the stem in place. Once the nut is loosened, you can pull the stem out of the toilet. To remove the old nut, use a pair of pliers to grip the nut and turn it counterclockwise. Once the nut is loose, you can pull it off of the toilet.

To install the new stem or nut, simply reverse the steps above. Once the new stem or nut is installed, you can put the handle back on the toilet.

Step 5: Turn On the Water Supply

Once the new handle is installed, you can turn on the water supply to the toilet. To do this, simply turn the valve counterclockwise until it is completely open.

Flushing a toilet with a broken handle is a simple process that can be completed in a few minutes. By following the steps in this guide, you can easily fix your broken toilet handle and get your toilet back in working order.

Additional Tips

• If you are not comfortable repairing a toilet handle yourself, you can always call a plumber to do the job for you.
• Be sure to read the manufacturer’s instructions before starting any repairs.
• Always wear gloves and eye protection when working on a toilet.

  How do I flush a toilet with a broken handle?

There are a few ways to flush a toilet with a broken handle.

• Use a plunger. The most common way to flush a toilet with a broken handle is to use a plunger. Place the plunger over the drain hole and push and pull the plunger up and down until the toilet flushes.
• Use a bucket of water. If you don’t have a plunger, you can also use a bucket of water to flush the toilet. Pour the water into the toilet bowl until it fills up to the top of the overflow pipe. The water will then overflow into the toilet bowl and flush it.
• Use a coat hanger. If you don’t have a plunger or a bucket of water, you can also use a coat hanger to flush the toilet. First, straighten out the coat hanger so that it is a long, straight piece of wire. Then, bend the coat hanger into a hook shape. Finally, insert the hook into the toilet bowl and pull up on the handle to flush the toilet.

What if the toilet is clogged?

If the toilet is clogged, you may need to use a plunger or a drain snake to clear the clog before you can flush the toilet.

• To use a plunger, place the plunger over the drain hole and push and pull the plunger up and down until the clog is cleared.
• To use a drain snake, insert the drain snake into the drain hole and turn the crank until the clog is cleared.

What if the toilet is overflowing?

If the toilet is overflowing, you will need to turn off the water supply to the toilet before you can fix the problem.

• To turn off the water supply, locate the water supply valve under the sink or behind the toilet. Turn the valve clockwise until it is completely closed.
• Once the water supply is turned off, you can then clean up the water that has overflowed from the toilet.
• To fix the problem, you will need to determine what is causing the toilet to overflow. If the toilet is clogged, you will need to clear the clog. If the toilet is leaking, you will need to repair the leak.

How can I prevent my toilet from breaking?

There are a few things you can do to prevent your toilet from breaking:

• Flush the toilet regularly. Flushing the toilet regularly will help to keep the toilet bowl clean and free of debris.
• Don’t put anything other than toilet paper in the toilet. Putting things like paper towels, feminine hygiene products, or food scraps in the toilet can clog the toilet and cause it to break.
• Inspect the toilet regularly for signs of wear and tear. If you notice any cracks, leaks, or other damage to the toilet, have it repaired or replaced as soon as possible.

By following these tips, you can help to prevent your toilet from breaking.

there are a few different ways to flush a toilet when the handle is broken. You can use a plunger, a bucket of water, or a coat hanger. Each method has its own advantages and disadvantages, so you should choose the one that is best for your situation. If you are not comfortable using any of these methods, you can always call a plumber to fix the problem for you.

Here are some key takeaways from this article:

• A plunger is the most common way to flush a toilet when the handle is broken.
• A bucket of water can also be used to flush a toilet, but it is more difficult.
• A coat hanger can be used to flush a toilet, but it is the least effective method.
• If you are not comfortable using any of these methods, you can always call a plumber to fix the problem for you.