How to Identify a Kohler Toilet Model

The Kohler toilet model number is usually imprinted on the inside back of the tank; on a two-piece toilet, the bowl has a separate component number underneath its bowl flange. Read and photograph every full code you find, because a tank number, bowl number, lid number, and seat number can all refer to different parts. Once you have the right number, you can match it to Kohler parts diagrams or get help identifying the complete toilet.

What a Kohler Toilet Model Number Identifies

A toilet model number identifies the toilet or a major porcelain component. You need it when replacing a flush valve, tank lid, bowl, seat, or another part that must fit the existing fixture.

The number may be molded into the porcelain, stamped in ink, or printed on a label. It is not always obvious which code is the model number:

  • A tank number can identify the tank itself.
  • A bowl number can identify the bowl itself.
  • A toilet-seat number identifies the seat, not the toilet.
  • A tank-lid number identifies the lid or a lid service part.
  • A serial number helps Kohler identify the product when the model mark is missing or unreadable.

For a one-piece toilet, the tank and bowl are joined as one porcelain unit, so the tank marking is normally the most useful starting point. With a two-piece toilet, treat the tank and bowl as separate parts until you have confirmed the complete toilet configuration.

How to Identify a Kohler Toilet Model

Use this table to choose the first marking to inspect before you start searching for parts.

What You Have First Place to Check What to Record
One-piece toilet Inside back of the tank Tank model number and any suffixes
Two-piece toilet Inside back of the tank, then underside of the bowl flange Tank number and bowl number separately
Loose tank lid Underside of the lid Lid or service-part number only
Kohler plastic seat Underside of the seat hinge Seat model number and color code
Intelligent toilet Product serial-number label Full serial number and product photos

Step 1: Identify the Toilet Configuration

  1. Look at the connection between the tank and bowl.
  2. If the tank and bowl are one continuous porcelain piece, you have a one-piece toilet.
  3. If the tank is bolted onto a separate bowl, you have a two-piece toilet.
  4. Decide what you are trying to replace. A seat, tank lid, flush valve, tank, and bowl can each have different identifying numbers.

Place a folded towel on a stable surface before lifting the tank lid. Porcelain lids can chip or crack if they are set on tile or the edge of the toilet.

Step 2: Inspect the Inside Back of the Tank

  1. Lift off the tank lid and set it aside safely.
  2. Look at the inside back wall of the tank, above the water line if possible.
  3. Use a flashlight and phone camera to inspect the porcelain from several angles.
  4. Photograph the mark before cleaning it, make a note of it, and replace the tank lid.

The toilet tank number is imprinted on the inside back of the tank. It may be faint, partly hidden by mineral buildup, or covered by an insulating tank liner.

If residue obscures the marking, wipe it gently with a cloth and cleaning supplies rather than scraping at the porcelain. I use cleaning supplies for this step because a blade can damage the glaze or erase an inked marking.

Step 3: Record the Entire Code, Including Suffixes

Copy every letter, number, dash, and suffix.

For Kohler products, a model number has a base number followed by a dash and letters or numbers. A stamped number may not include the “K” prefix, so do not discard a usable number simply because it does not begin with K.

The ending characters can identify a color code, trip-lever position, or product generation:

  • RA can indicate a right-hand trip lever.
  • 0 is Kohler’s color code for a white fixture.
  • Ending letters can identify a product generation or revision.

A serial number is different. Kohler and Sterling serial numbers are usually 8 to 11 characters long, most commonly 9 characters, and they do not contain hyphens. Many begin with an “S.” Record it exactly from the toilet’s serial-number label or sticker rather than trying to convert it into a model number yourself.

Step 4: Check the Bowl on a Two-Piece Toilet

  1. Keep the tank number separate from the bowl number in your notes.
  2. Look beneath the bowl flange for a number molded into the underside of the china.
  3. Use a flashlight and your phone camera rather than unbolting or moving the toilet.
  4. Photograph the bowl number and label it clearly as “bowl,” not “tank.”

For a two-piece Kohler toilet, component-specific diagrams show the available replacement parts.

This matters when ordering a replacement tank, bowl, or internal part. A tank diagram can help you locate tank-specific parts.

Step 5: Confirm the Product Before Ordering a Part

Search Kohler’s site using the exact number you recorded, including the suffixes. When you find a likely product page, open the Installation and Service Parts section to view its parts diagram.

Kohler’s Service & Replacement Parts page provides product identification tools and places the relevant diagram under Installation and Service Parts on the product page.

Before ordering, confirm all of these points:

  • The diagram shows the same tank or bowl shape you have.
  • The trip lever is on the same side as your toilet.
  • The finish and color match your fixture.
  • The part is listed for your exact tank or bowl number.
  • You are ordering a toilet component, not a lid or seat that only looks similar.

Save the photos of your markings and the matching parts diagram with your receipt. They will make future repairs much easier.

Numbers That Do Not Identify the Entire Toilet

Tank lid and seat numbers can identify replacement parts, while intelligent toilets may use visible product-information labels rather than a porcelain model stamp.

Tank Lid Numbers

A removable tank lid often has a molded or inked number on its underside. On Kohler toilets manufactured after 1990, various service-part numbers may be listed underneath the lid.

That number can help you replace a broken lid, but it is not necessarily the toilet’s full model number. Confirm the tank number before buying a lid, flush valve, or other tank part.

Kohler Plastic Toilet Seat Numbers

If you are replacing only the toilet seat, identify the seat separately from the toilet.

Kohler plastic seats have a Kohler logo molded into the bottom of the seat ring. Most Kohler plastic seats made since October 2019 have the seat model number and color code printed on the underside of the seat hinge. You usually need to remove the seat to see that label.

Some seats also have a QR code that can provide the seat model number. This is useful for ordering a matching replacement seat, but it does not identify the porcelain toilet beneath it.

Intelligent Toilets

Kohler intelligent toilets may have a product-information label rather than an obvious porcelain model stamp. Look for a label on the back of the unit, behind an access panel, on the back of the lid, or beneath the toilet shell.

Do not force an access panel or disconnect electrical connections just to find a number. Photograph the outside of the toilet, its controls, and every visible label, then use the product information for identification.

Confirm the Exact Kohler Toilet Variant

A base number alone may identify several versions of the same toilet. The suffixes distinguish variations such as trip-lever position, color, style, and generation.

Compare these details against the product listing and service diagram:

  • One-piece or two-piece construction
  • Tank shape and lid shape
  • Round or elongated bowl shape
  • Trip-lever location
  • Flush-button or lever operation
  • Color and finish
  • Seat style, if you are ordering a seat
  • Whether the listed part fits your tank number, bowl number, or both

Do not rely only on a photo search or a similar-looking toilet. Kohler has made many toilets with similar outlines but different internal parts.

When You Cannot Find a Readable Number

A missing or hidden mark does not mean the toilet cannot be identified. Try the least invasive options first.

Clean and Recheck the Tank Marking

Mineral residue, bacterial buildup, or an old ink stamp can make the tank number hard to read. Wipe the inside-back tank area carefully, shine a flashlight across the porcelain at an angle, and take several close-up photos.

If the tank has an insulating liner, the liner may cover the porcelain marking. In that case, photograph the underside of the lid and record any service-part number there as supporting information.

Use Kohler Scout Photo Identification

Kohler’s Scout tool can help identify a product model from an uploaded photo. Take clear photos of the full toilet from the front and side, the tank interior, the flush handle or button, and any labels or stamped codes.

Scout is useful when the number is worn away or you cannot tell whether you have a one-piece or two-piece model.

Contact Kohler With Your Serial Number and Photos

If you have a serial number but no readable model number, provide the serial number, photos, and any tank, bowl, lid, or seat codes to Kohler. This is especially useful for older toilets, discontinued models, insulated tanks, and intelligent toilets.

Frequently Asked Questions

Why does my Kohler toilet number not start with K?

A Kohler model number that does not start with “K” can still be valid. Kohler may omit the “K” on product labels and when a number is stamped directly onto the product. Keep the base number and every suffix exactly as printed when searching.

How can I tell whether a code is a Kohler serial number?

A Kohler or Sterling serial number is usually 8 to 11 characters long, most often 9 characters, and it does not use hyphens. It is commonly found on a serial-number label or sticker and may begin with “S,” while a model number often includes a base number and suffixes separated by a dash.

Where is the Kohler toilet bowl model number on a two-piece toilet?

The bowl number is molded into the china on the underside of the bowl flange. Use a flashlight and phone camera to inspect it without loosening the toilet from the floor, then record it separately from the tank number.

Can I identify my toilet from the tank lid number?

A tank-lid number can help identify or replace the lid, but it is not a dependable full toilet model number. On Kohler toilets manufactured after 1990, the underside of the lid may list service-part numbers, so match those numbers to the tank before ordering anything else.

How do I identify a Kohler plastic toilet seat?

Most Kohler plastic toilet seats made since October 2019 have a model number and color code on the underside of the hinge. Remove the seat if needed to view the label, and scan its QR code if one is present; the seat number identifies the seat, not the toilet.

What should I do if I still cannot identify my Kohler toilet?

Use Kohler’s Scout photo-identification tool to identify the toilet from uploaded photos. If you still need help, contact Kohler with clear toilet photos, the full serial number, and every code found on the tank, bowl, lid, or seat.

Where can I find the model number on a Kohler toilet tank?

On a Kohler toilet tank, look on the interior rear wall after you remove the lid. Write down every character shown, including any dash and ending letters or numbers, because those details can distinguish the version of the product.