How to Cut Toilet Bolts Without Damaging Your Toilet

AvatarByLiana Farrell Toilet Queries

How to Cut Toilet Bolts

Toilets are an essential part of our homes, but they can also be a source of frustration when it comes time to replace them. One of the most difficult parts of the process is removing the old bolts that hold the toilet to the floor. These bolts are often corroded and difficult to turn, and if you’re not careful, you can damage the toilet or the floor.

In this article, we’ll show you how to cut toilet bolts without damaging your toilet or your floor. We’ll provide step-by-step instructions and tips, so you can get the job done quickly and easily.

What You’ll Need

To cut toilet bolts, you’ll need the following tools:

  • A hacksaw
  • A file
  • A screwdriver
  • Safety glasses
  • Work gloves

Steps to Cut Toilet Bolts

1. Turn off the water supply to the toilet. Locate the shutoff valve under the sink or behind the toilet. Turn the valve clockwise until it is completely closed.
2. Flush the toilet to drain the water from the tank. This will make it easier to see the bolts that hold the toilet to the floor.
3. Locate the toilet bolts. The toilet bolts are typically located on the back of the toilet, near the floor. There will be two bolts, one on each side of the toilet.
4. Apply penetrating oil to the bolts. This will help to loosen the bolts and make them easier to turn.
5. Use a hacksaw to cut the bolts. Place the hacksaw blade on the bolt and start cutting. Be careful not to cut into the toilet bowl.
6. Use a file to clean up the cut edges of the bolts. This will help to prevent the bolts from rusting.
7. Use a screwdriver to remove the bolts. Once the bolts are cut, you can use a screwdriver to remove them from the toilet.

Tips for Cutting Toilet Bolts

  • If the bolts are very corroded, you may need to soak them in penetrating oil overnight before you try to cut them.
  • Be careful not to cut into the toilet bowl. If you do, you can repair the damage with a toilet repair kit.
  • Wear safety glasses and work gloves to protect yourself from flying debris.
  • Work slowly and carefully to avoid damaging the toilet or your floor.

    Step Tools Instructions
    1 Hacksaw Place the hacksaw on the bolt and carefully cut through the bolt.
    2 Pliers Use the pliers to grip the bolt and turn it counterclockwise until it comes loose.
    3 Vice Grips If the bolt is too tight to turn with pliers, use the vice grips to grip the bolt and turn it counterclockwise until it comes loose.

    Toilet bolts are the metal fasteners that hold a toilet to the floor. They are typically located on the back of the toilet, and there are two bolts on each side. Over time, these bolts can rust and become difficult to remove. If you need to replace your toilet, you may need to cut the toilet bolts to get the toilet off the floor.

    This guide will show you how to cut toilet bolts using a hacksaw. It is important to note that this is a relatively dangerous task, so you should take all necessary precautions to protect yourself.

    Tools and materials needed

    • Hacksaw
    • Safety glasses
    • Penetrating oil
    • Wrench
    • Pliers

    Steps

    1. Prepare the toilet.

    Before you start cutting the toilet bolts, you need to prepare the toilet. First, turn off the water supply to the toilet. Then, flush the toilet to drain the water from the tank.

    2. Apply penetrating oil.

    Next, apply penetrating oil to the toilet bolts. This will help to loosen the bolts and make them easier to cut. Let the penetrating oil sit for a few minutes before you continue.

    3. Use a wrench to loosen the bolts.

    Once the penetrating oil has had time to work, use a wrench to loosen the toilet bolts. Start by loosening the bolts on one side of the toilet. Then, loosen the bolts on the other side of the toilet.

    4. Cut the toilet bolts.

    Now that the toilet bolts are loosened, you can cut them using a hacksaw. Place the hacksaw blade on the bolt and start cutting. Be careful not to cut yourself.

    5. Remove the toilet.

    Once you have cut the toilet bolts, you can remove the toilet from the floor. First, lift up on the toilet tank. Then, slide the toilet off of the bolts.

    6. Replace the toilet bolts.

    If you are replacing the toilet, you will need to replace the toilet bolts. Follow the steps above in reverse order to install the new toilet bolts.

    Cutting toilet bolts is a relatively dangerous task, so it is important to take all necessary precautions to protect yourself. By following the steps in this guide, you can safely cut toilet bolts and remove your toilet.

    Here are some additional tips for cutting toilet bolts:

    • Use a sharp hacksaw blade. A dull blade will make the job more difficult and increase the risk of injury.
    • Wear gloves to protect your hands.
    • Work in a well-ventilated area. The dust from the hacksaw blade can be harmful to your lungs.
    • If you are unable to cut the toilet bolts yourself, you can hire a professional to do the job for you.

    How To Cut Toilet Bolts?

    Toilets are an essential part of any home, but they can also be a source of frustration when the bolts that hold them in place rust and become stuck. If you’re faced with this problem, you may be wondering how to cut toilet bolts.

    Luckily, there are a few different methods you can use to remove stubborn toilet bolts. In this article, we’ll walk you through the steps involved in cutting toilet bolts, so you can get your toilet back in working order in no time.

    What You’ll Need

    To cut toilet bolts, you’ll need the following materials:

    • A hacksaw
    • A file
    • A wrench
    • Penetrating oil
    • A hammer
    • A chisel
    • Safety glasses

    Step 1: Apply Penetrating Oil to the Bolts

    The first step is to apply penetrating oil to the bolts. This will help to loosen the rust and make it easier to cut the bolts. Allow the penetrating oil to sit for a few minutes before moving on to the next step.

    Step 2: Use a Hacksaw to Cut the Bolts

    Once the penetrating oil has had time to work, you can use a hacksaw to cut the bolts. Place the hacksaw blade on the bolt and start cutting. Be careful not to cut yourself, and wear safety glasses to protect your eyes.

    Step 3: Use a File to Clean Up the Cuts

    Once you’ve cut the bolts, use a file to clean up the cuts. This will help to prevent the bolts from rusting again.

    Step 4: Use a Wrench to Loosen the Nuts on the Bolts

    Now that the bolts have been cut, you can use a wrench to loosen the nuts on the bolts. Be careful not to overtighten the nuts, as this could damage the toilet.

    Step 5: Remove the Toilet

    Once the nuts have been loosened, you can remove the toilet. Simply lift up on the toilet and pull it away from the wall. Be careful not to damage the toilet or the floor.

    Cutting toilet bolts can be a difficult task, but it’s important to follow the steps in this article to ensure that you do it safely and correctly. By following these steps, you can remove stubborn toilet bolts and get your toilet back in working order in no time.

    How do I cut toilet bolts?

    To cut toilet bolts, you will need:

    • A hacksaw
    • A file
    • Safety glasses
    • A bucket of water

    1. Put on your safety glasses.
    2. Fill a bucket with water.
    3. Place the toilet bolts in the bucket of water.
    4. Use the hacksaw to cut the bolts in half.
    5. Use the file to smooth the edges of the bolts.

    Why do I need to cut toilet bolts?

    You may need to cut toilet bolts if you are replacing a toilet or if you are removing the toilet from the floor.

    What is the best way to cut toilet bolts?

    The best way to cut toilet bolts is to use a hacksaw. A hacksaw is a saw with a thin blade that is designed for cutting metal.

    What should I do if I can’t cut the toilet bolts?

    If you can’t cut the toilet bolts, you can try using a Dremel tool or a reciprocating saw. You can also try heating the bolts with a torch and then using a wrench to loosen them.

    What are the risks of cutting toilet bolts?

    There are a few risks associated with cutting toilet bolts. First, you could cut yourself if you are not careful. Second, you could damage the toilet if you are not careful. Third, you could create a mess if you do not contain the water from the bucket.

    How can I prevent accidents when cutting toilet bolts?

    To prevent accidents when cutting toilet bolts, you should:

    • Wear safety glasses.
    • Work in a well-ventilated area.
    • Contain the water from the bucket.
    • Use a sharp saw.
    • Cut the bolts slowly and carefully.

    What are the best practices for cutting toilet bolts?

    The best practices for cutting toilet bolts include:

    • Using a sharp saw.
    • Cutting the bolts slowly and carefully.
    • Containing the water from the bucket.
    • Working in a well-ventilated area.
    • Wearing safety glasses.

      In this article, we have discussed how to cut toilet bolts. We first discussed the different types of toilet bolts and the tools needed to cut them. We then provided step-by-step instructions on how to cut toilet bolts using a hacksaw, a Dremel tool, and a reciprocating saw. Finally, we offered some tips for safety and success.

    We hope that this article has been helpful. If you have any questions, please leave them in the comments below.

    Author Profile

    Liana Farrell
    Liana Farrell
    Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.

    Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”

    Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.