How To Cut Lvp Around Toilet?

AvatarByLiana Farrell Toilet Queries

How to Cut LVP Around a Toilet

Laminate vinyl planks (LVP) are a popular flooring option for many homeowners, thanks to their affordability, durability, and ease of installation. However, cutting LVP around a toilet can be a bit tricky, as you need to make sure that the cuts are precise and that the flooring fits snugly against the toilet.

In this article, we will walk you through the process of cutting LVP around a toilet, step-by-step. We will also provide tips and tricks to help you get the job done quickly and easily.

So, if you’re ready to learn how to cut LVP around a toilet, read on!

How To Cut Lvp Around Toilet?

| Step | Action | Tools |
|—|—|—|
| 1. | Measure the distance from the toilet flange to the wall. | Tape measure |
| 2. | Cut the LVP to the desired length. | Utility knife |
| 3. | Apply a bead of adhesive to the back of the LVP. | Adhesive |
| 4. | Press the LVP into place around the toilet flange. | Rubber mallet |
| 5. | Use a utility knife to trim the excess LVP. | Utility knife |
| 6. | Apply a sealant around the edge of the LVP. | Sealant |

How to Cut LVP Around Toilet?

Tools and Materials

To cut LVP around a toilet, you will need the following tools and materials:

  • A utility knife
  • A straightedge
  • A pencil
  • A cutting mat
  • A utility saw
  • A drill
  • A 1/2-inch spade bit
  • A sanding block
  • A dust mask
  • Safety glasses

Preparing the Toilet

Before you begin cutting the LVP, you will need to prepare the toilet. First, remove the toilet seat. Then, use a utility knife to score the caulk around the base of the toilet. Be careful not to cut the toilet itself.

Next, use a straightedge and a pencil to mark the location of the toilet flange on the LVP. The flange is the metal ring that secures the toilet to the floor.

Once you have marked the location of the flange, use a utility saw to cut the LVP along the mark. Be careful not to cut too deeply, as you do not want to damage the subfloor.

Cutting the LVP

Now that you have prepared the toilet, you can begin cutting the LVP. First, measure the distance from the wall to the toilet flange. This will be the width of the cut you need to make.

Next, use a straightedge and a pencil to mark the location of the cut on the LVP. Then, use a utility knife to score the LVP along the mark.

Finally, use a utility saw to cut the LVP along the score line. Be careful not to cut too deeply, as you do not want to damage the subfloor.

Installing the LVP

Once you have cut the LVP, you can begin installing it. First, apply a bead of adhesive to the subfloor around the toilet flange. Then, press the LVP into the adhesive and use a rubber mallet to tap it into place.

Next, use a utility knife to trim the excess LVP around the toilet. Be careful not to cut the toilet itself.

Finally, reinstall the toilet seat.

Cutting LVP around a toilet is a relatively simple task, but it is important to take your time and do it carefully. By following these steps, you can ensure that you get a professional-looking installation.

Here are some additional tips for cutting LVP around a toilet:

  • Use a sharp utility knife to make clean cuts.
  • Be careful not to cut the subfloor.
  • Use a dust mask and safety glasses to protect yourself from dust and debris.
  • If you are not comfortable cutting LVP, you can hire a professional to do it for you.

Cutting the LVP

To cut LVP around a toilet, you will need a utility knife, a straightedge, and a cutting mat.

1. Measure the distance from the wall to the toilet flange. This will be the width of the cut you need to make.
2. Mark the cutting line on the LVP with a pencil. Make sure the line is straight.
3. Place the straightedge on the cutting line and secure it with painter’s tape.
4. Use the utility knife to cut along the cutting line. Be careful not to cut yourself.
5. Sand the edges of the cut to smooth them out.

Installing the LVP

To install LVP around a toilet, you will need a hammer, a nail set, a pry bar, and a utility knife.

1. Start by installing the LVP in the area furthest from the toilet. This will give you a reference point for the rest of the installation.
2. Cut the LVP to fit around the toilet flange. Make sure the cut is tight against the flange.
3. Secure the LVP to the floor with nails or adhesive. Be careful not to damage the LVP.
4. Use a pry bar to pry up any LVP that is not flush with the floor.
5. Sand the edges of the LVP to smooth them out.

Tips for Cutting and Installing LVP Around a Toilet

  • Use a sharp utility knife to make clean cuts.
  • Make sure the cutting line is straight.
  • Secure the straightedge with painter’s tape to prevent it from slipping.
  • Sand the edges of the cut to smooth them out.
  • Use a hammer and nail set to secure the LVP to the floor.
  • Use a pry bar to pry up any LVP that is not flush with the floor.
  • Sand the edges of the LVP to smooth them out.

Cutting and installing LVP around a toilet is a relatively simple task. By following these steps, you can easily create a beautiful and durable floor in your bathroom.

How do I cut LVP around a toilet?

To cut LVP around a toilet, you will need the following materials:

  • A utility knife
  • A straightedge
  • A pencil
  • A saw
  • A drill
  • A hole saw
  • A sanding block
  • A tack cloth

Step 1: Measure the area around the toilet.

Use a tape measure to measure the width and length of the area around the toilet. Add 1 inch to each measurement to allow for a 1/2-inch overlap on all sides.

Step 2: Mark the cutting lines.

Use a pencil to mark the cutting lines on the LVP. Make sure to mark the cutting lines on the back of the LVP so that they are not visible once the flooring is installed.

Step 3: Cut the LVP.

Use a utility knife to score the LVP along the cutting lines. Then, use a saw to cut through the LVP.

Step 4: Drill holes for the toilet bolts.

Drill holes for the toilet bolts in the LVP. The holes should be located 1 inch from each side of the toilet and 1 inch from the front and back of the toilet.

Step 5: Install the LVP.

Install the LVP around the toilet, starting with the piece that will be against the wall. Use a rubber mallet to tap the LVP into place.

Step 6: Sand the LVP.

Use a sanding block to sand the edges of the LVP to create a smooth transition between the flooring and the toilet.

Step 7: Clean the LVP.

Use a tack cloth to remove any dust or debris from the LVP.

Here are some additional tips for cutting LVP around a toilet:

  • Use a sharp utility knife to make clean cuts.
  • Use a saw that is designed for cutting laminate flooring.
  • Drill the holes for the toilet bolts before you install the LVP.
  • Use a rubber mallet to tap the LVP into place.
  • Sand the edges of the LVP to create a smooth transition between the flooring and the toilet.
  • Clean the LVP with a tack cloth to remove any dust or debris.

What is the best way to cut LVP around a toilet?

The best way to cut LVP around a toilet is to use a utility knife to score the LVP along the cutting lines. Then, use a saw to cut through the LVP.

Can I use a jigsaw to cut LVP around a toilet?

Yes, you can use a jigsaw to cut LVP around a toilet. However, it is important to use a blade that is designed for cutting laminate flooring.

What is the best way to seal LVP around a toilet?

The best way to seal LVP around a toilet is to use a sealant that is specifically designed for use with laminate flooring.

How do I prevent LVP from cracking around a toilet?

To prevent LVP from cracking around a toilet, you can do the following:

  • Make sure that the LVP is installed correctly.
  • Use a sealant to seal the LVP around the toilet.
  • Avoid placing heavy objects on the LVP around the toilet.

What is the best LVP for around a toilet?

There are many different types of LVP that can be used around a toilet. The best LVP for around a toilet will depend on your specific needs and budget.

Here are some factors to consider when choosing LVP for around a toilet:

  • The thickness of the LVP.
  • The durability of the LVP.
  • The price of the LVP.
  • The appearance of the LVP.

Here are some recommendations for LVP for around a toilet:

  • Mohawk Pergo Outlast Luxury Vinyl Plank Flooring is a durable and affordable option for around a toilet. It is available in a variety of colors and styles.
  • Armstrong Flooring CoreLuxe Luxury Vinyl Plank Flooring is a high-quality option for around a toilet. It is durable and water-resistant.
  • Shaw Floors Surelock Luxury Vinyl Plank Flooring is a stylish and affordable option for around a toilet. It is available in a variety of colors and styles.

    In this blog post, we have discussed how to cut LVP around a toilet. We started by discussing the tools and materials you will need. We then went over the steps involved in cutting the LVP, including how to measure the area, make the cuts, and install the flooring. We also provided tips for making the process easier and more successful.

We hope that this blog post has been helpful. If you have any questions, please feel free to contact us.

Author Profile

Liana Farrell
Liana Farrell
Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.

Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”

Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.